JVC XM-PJ1BUEE - Owner's Manual Immediate Download

PORTABLE MINIDISC PLAYER

ENGLISH

LVT0122-001A [E]

XM-PJ1BU

Remove the rechargeable battery from its case before use.

Use numbers indicated in parentheses when asking for replacement parts.

AC adaptor (AA-R9017)

1 pc.

Headphones

1 pc.

Wired remote control

1 pc.

Charger/adaptor (AC-R124)

1 pc.

Supplied Accessories

Check the packing carton for these accessories.

Thank you for purchasing this JVC product. Please read these instructions carefully before starting operation to be sure to obtain opti-

mum performance and a longer service life from the unit.

INSTRUCTIONS

Nickel metal hydride battery (rechargeable) (BN-R127)

1 pc.

Carrying pouch

1 pc.

Power Supply Preparations

Refer to the specifications for information on operating times when using rechargeable battery,

dry-cell battery, or both together.

Using nickel metal hydride battery (rechargeable

battery) (BN-R127)

1 Remove the supplied rechargeable battery from its case.

2 Insert the rechargeable battery into the supplied charger/adaptor.

3 Set the switch of the charger/adaptor to "CHARGER".

4 Connect the supplied AC adaptor.

5 The charge indicator lights in red and it will go out when recharging

is completed. Unplug the AC adaptor from the AC outlet and the charger/

adaptor.

6 Remove the recharged battery from the charger /adaptor and insert

it into the unit.

Position the ribbon under the battery in order to easily remove the battery from the case.

Notes:

· You cannot use the MD player during charging the rechargeable battery.

· It takes approximately 1.5 hours to recharge the rechargeable batteries.

· Rechargeable battery has a service life of approximately 300 charge-discharge cycles. If the

operating time on one full charge becomes noticeably shorter than it used to be, the battery

has reached the end of its service life and should be replaced.

· The AC adaptor and rechargeable batteries may become warm while recharging is in

progress. This is not a malfunction.

Using the AC adaptor

CAUTION: Be sure no battery is inserted into the unit.

1 Set the switch of the charger/adaptor to "ADAPTOR".

2 Connect the supplied AC adaptor and charger/adaptor.

Note:

The unit is in the standby condition when the AC adaptor and charger/adaptor are connected.

The primary circuit is always "live" as long as the AC adaptor is connected to an electrical outlet.

Using dry-cell battery (not included)

CAUTION: Do not use the dry-cell battery together with the AC adaptor.

Open the battery cover and insert a LR6 (UM-3) alkaline battery into the battery compartment.

Position the ribbon under

the battery in order to eas-

ily remove the battery from

the case.

Note:

To lengthen the battery life, you can use both rechargeable battery and the dry-cell battery.

Cautions

Unit

No altering or remodeling

This can cause malfunctioning.

No dropping or strong impacts

This may damage the unit.

Locations to be avoided

Avoid using the unit in the following locations since they can cause malfunctioning.

1. Bathrooms and other moisture-prone places.

2. Warehouses and other dusty places

3. Very hot places near heating appliances, etc.

Do not leave the unit exposed to direct sunlight for long periods of time

This may deform or discolor the cabinet and may also cause malfunctioning.

Precautions for Listening with the headphones

· Do not play your headset at a high volume. Hearing experts advise against continuous ex-

tended play.

· If you experience a ringing in your ears, reduce volume or discontinue use.

· Do not use while operating a motorized vehicle. It may create traffic hazard and is illegal in

many areas.

· You should use extreme caution or temporarily discontinue use in potentially hazardous

situations.

· Even if your headphones are an open-air type designed to let you hear outside sounds, don't

turn up the volume so high that you can't hear what's around you.

When driving a car

In the interest of traffic safety, do not operate the unit while driving.

Batteries

· Before replacing batteries, always turn off the unit.

Rechargeable nickel metal hydride battery (BN-R127):

· Use only the rechargeable battery (BN-R127) supplied with the unit.

· If the power delivered by the battery lasts for a very short time after recharging, it means

that the battery's service life is over. Do not use it any more.

· Recharging already charged battery will shorten its service life.

· When recharging battery for the first time or when it has not been used for a long period of

time, the play time may be shorter than usual. In a case like this, repeatedly recharge and

discharge the battery. This will restore it to its regular state.

· Do not allow any metal objects to touch the terminals of rechargeable battery since this may

cause short-circuiting which is dangerous.

· Recharging shall be made at the temperature from 10°C to 35°C.

Dry cell battery and rechargeable battery:

To prevent damage to the batteries and electrolyte leakage, heed the following points.

· Align the » and Æ polarities properly when inserting the batteries.

· Remove the batteries if you do not plan to use the unit for a long period of time.

· Do not throw batteries into a fire, and do not short-circuit, disassemble or subject them to

excessive heat.

· Do not attempt to recharge dry cell batteries.

Carrying batteries:

When putting dry cell or rechargeable batteries in a pocket or bag, ensure that no other metal

objects such as a necklace are placed together with them. Contact with metal may cause short-

circuiting which, in turn, may cause a fire.

Be absolutely sure to carry the rechargeable battery in the battery carrying case.

Notice about the rechargeable battery

The battery is designated recyclable.

Please follow your local recycling regulations.

AC adaptor and charger/adaptor

· Handle the AC adaptor and charger/adaptor carefully. Improper handling is dangerous.

· Do not touch them with wet hands.

· Do not place heavy objects on top of them.

· Do not forcibly bend them.

· Be sure to connect only the AC adaptor and charger/adaptor provided with the unit.

· Disconnect the AC adaptor from the power outlet if the unit is not going to be used for a

long time.

A HOLD switch

B Headphones jack ( )

C Play / pause / stop button (38 /7 )

D EJECT button

E Skip / search button (¢

)

F Skip / search button (4

)

G Volume +, button

H HOLD switch

I Display

Location of Controls

J DISPLAY button

K Play / pause /stop button (38 /7 )

L FAV (Favorite) button

M JOG dial

Volume +, & Skip / search button

(4 ¢

)

N JOG MODE button

O A.C.BASS (Active Clear Bass) but-

ton

P P.MODE (Play Mode) button

[Indicators on the display

of the remote control]

AC adaptor

Charge indicator

Charger/Adaptor

AC adaptor

HOLD

Top panel of the remote control

Bottom of the unit

EJECT

PORTABLE

MINIDISC

PLAYER

XM-PJ

LOCK

VOLUME

VOL

JOG

MODE

A.C.BASS

Disc mark

BASS

Random

MONO

Battery

Repeat

FAV

Rechargeable battery (BN-R127)

BN-R127

Charger/Adaptor

Accidental Operation Prevention Function (Hold

Mode)

This function prevents the unit from accidental button operation.

The unit and remote control have the HOLD switches, each of which works independently.

Slide the HOLD switch in the direction shown by the arrow to activate it.

When the HOLD switch of the unit or remote control is activated, no button operation is pos-

sible in the unit or the remote control.

To operate the unit or remote control normally

, return the HOLD switch.

Accidental Opening Prevention Function

To prevent the lid from the accidental opening, turn the EJECT button to the right in order to

lock it.

Battery Indicator

The battery indicator appears on the display of the remote control. When the indication

changes as follows, power will be shut off a short while after.

Rechargeable battery: Recharge it.

Dry-cell batter

y: Replace it with new one.

Notes:

· The battery indicator appears when an MD is loaded in the unit.

· The battery indicator also appears when the AC adaptor is used. However, it has no mean-

ing.

Insert the battery .

Slide the cover slightly

upward, then close it.

OPEN

BN-R127

Ribbon

Open the battery cover.

Alkaline battery (Not supplied)

Ribbon

EJECT

LOCK

· To open the lid, return the EJECT button to the original

position and then press it.

· It is recommended to lock the lid when moving the bat-

teries.

WARNING LABEL,

PLACED INSIDE

THE UNIT

CAUTION!

THIS PRODUCT UTILIZES A LASER.

USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE

PROCEDURES

OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR

YOURSELF. REFER SERVICING TO QUALIFIED

PERSONNEL.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

CLASS

LASER

PRODUCT

CLASS 1 LASER PRODUCT

DANGER: Invisible laser radiation

when open and interlock failed or

defeated. Avoid direct exposure to

beam.

CAUTION: Do not open the top cover.

There are no user serviceable parts

inside the Unit; leave all servicing to

qualified service personnel.

Operation

Fast forward/

reverse

Button

Skip function (unit)

Press during play or in Stop mode.

Search function (unit)

Keep depressed during play.

Skip function (remote control)

During play mode or in Stop mode, press the JOG MODE button

and briefly turn the JOG dial to the right or left.

Search function (remote control)

During play mode, press the JOG MODE

button and continuously turn the JOG dial

to the right or left.

Within 5 seconds

Button

Operation

To pause play

To stop play

To turn off the unit

(Off mode)

· During Random Play, the skip but-

tons cannot be used to skip back to

tracks that were played previously

in the random sequence.

Press during play.

Press during play for 1 second or more.

In Stop mode, press for 1 second or more.

Press again to restart play.

If nothing is done for 2 minutes, the

power will be automatically shut off.

Display/reference

Blinks.

Stops.

Press again to restart play (Resume

Play).

The current track will be played from

the beginning. (See "Resume Play".)

If nothing is done for 45 seconds, the

power will be automatically shut off.

The power is shut off after "POWER

OFF" appears on the display.

To turn on the unit, press the same

button again.

(Blank)

Display/reference

Reverse

Forward

Repeat Play and Random Play

You can select Repeat Play or Random Play. In Repeat Play, you can repeat all the tracks or

individual track as many times as you like. In Random Play, you can play all the tracks in ran-

dom order.

Selecting Repeat Play and Random Play in Stop mode

In Stop mode, press the P.MODE button. Each time you press the button, the play mode

changes as follows.

P 1 = P = RDM = P 1 RDM = P RDM = Original display = (back to the beginning)

P 1

: Repeats 1 track.

: Repeats all the tracks.

RDM

: Random play

P 1 RDM : Repeats one track randomly selected.

P RDM : Repeats all the tracks in random order.

After selecting one of the above modes, press the 38 /7 button.

For example, to start Random Play, press the P.MODE button until "RDM" indicator appears

and then start playback.

To exit Repeat Play or Random Play,

stop the MD and then press the P.MODE button until

the display returns to the original one.

Repeat Play during Playback

During Normal Play:

Each time you press the P.MODE button, the play mode changes as follows.

P 1 = P = Original display = (back to the beginning)

Select "P 1" to repeatedly play the current track. Select "P " to repeat all the tracks.

During Random Play:

Each time you press the P.MODE button, the play mode changes as follows.

P 1 RDM = P RDM = Original display = (back to the beginning)

Select "P 1 RDM" to repeatedly play a randomly selected track. Select "P RDM" to repeat

all the tracks in random order.

To exit Repeat Play,

stop the MD and then press the P.MODE button until the display returns

to the original one.

Selecting the Operational Options of Remote Control

CAUTION:

Before connecting the car adaptor, remove the rechargeable battery and the alkaline

battery from the unit.

· Connect the car adaptor as shown below.

· Connect the car audio cassette adaptor between the remote control and the cassette slot of

your car audio system.

· Adjust the volume level of the unit to an appropriate level.

Notes:

· Since the insertion direction of the car audio cassette adaptor is limited, be sure whether it

can be inserted into the cassette slot of your car audio system.

· Depending on the vehicle used, noise may occur. In this case, it is recommended to connect a

noise filter available on the market between the remote control and car audio cassette adaptor.

· If your car audio system is equipped with a LINE IN or AUX IN jack, you can connect the

output of the remote control to the jack using a stereo mini plug signal cord (not supplied).

In this case, you do not need the optional car audio cassette adaptor.

Troubleshooting Guide

Before requesting service for this unit, check the chart below for a possible cause of the prob-

lem you are experiencing. Some simple checks or a minor adjustment on your part may elimi-

nate the problem and restore proper operation.

If you are in doubt about some of the check points, or if the remedies indicated in the chart do

not solve the problem, refer to the directory of Authorized Service Centers (enclosed with this

unit) to locate a convenient service center, or consult your dealer for instructions.

Problem

Cannot operate.

Cannot play the MD.

Tracks on MD do not play in or-

der, starting with the first track.

Cannot hear music--too noisy.

TV picture is distorted.

Radio reception is noisy.

Power is not turned on.

FAV registration is impossible.

Charging indicator does not light

during charging.

Check this

Is the MD loaded? If not loaded "NO DISC" will appear.

· Is the HOLD switch released?

· Is the battery low?

· Is there moisture condensation on the lens?

(Wait for about an hour and then try again.)

· Is the Repeat Play or Random Play selected?

· Is the FAV function activated?

· Is the headphones plug inserted all the way?

· Is the plug dirty? (Wipe away dirt on the plug.)

· Is music recorded on the MD? If not, "BLANK DISC"

will appear.

Is the unit too near a TV or tuner? (If the TV or tuner is

connected to a simple indoor antenna, connect it to an

outdoor antenna.)

· With both HOLD switches activated, the battery was

changed during playback. (Release both HOLD switches

and try to operate again.)

· After FAV music registration, you have changed the

battery without stopping the MD. (Turn off the power

before changing the battery.)

Is the charger too hat?

(If so, disconnect the AC adaptor and leave the charger

for a while.)

Maintenance

Unit:

Wipe the unit and remote control with a soft cloth. Remove stubborn dirt using a cloth which

has been dipped in water or soapy water and wrung out, and then wipe dry.

· If you intend to use a chemically treated cleaning cloth, read its directions first.

· Do not use alcohol or paint thinners.

MDs:

If the MD cartridge is dirty wipe it with a damp cloth and then wipe dry.

When storing MDs, avoid locations which are

· Exposed to direct sunlight.

· Susceptible to high levels of humidity or dust.

· Directly exposed to heat from a heating appliance.

· On top of a car dashboard or near the rear window.

Handling the MDs

· Do not open the shutter. The shutter is usually locked to prevent opening. Do not force to

open it or the disc may be destroyed.

MD Messages:

Messages

Meaning

Action

DISC ERROR

There is a problem (damage) with the disc.

Replace the disc.

READ ERROR

Cannot read data.

Remove the MD and

reinsert it.

Specifications

Portable MINIDISC player

Type

: Minidisc digital audio system

Sampling frequency

: 44.1 kHz

Compression/expansion

method

: ATRAC method

Number of channels

: 2 channels (stereo)

Frequency response

: 20 Hz to 20,000 Hz

Wow & flutter

: Unmeasurable

Output

: Headphone (3.5 mm dia. stereo

× 1)

5 mW/ch at 10% THD/16 ohms to 47 kohms

Duration of battery

: Approx. 7 hours when using a rechargeable battery

(BN-R127) charged for 1.5 hours,

Approx. 7 hours when using an alkaline battery (LR6-Panasonic)

Approx. 16 hours when using a rechargeable battery and

alkaline battery together

* Above duration may differ depending on the ambient tempera-

ture and conditions.

Power requirements

: DC 1.2 V (rechargeable battery), DC 1.5 V (R6 size battery)

DC IN 1.5 V

Dimensions (W

× H × D) : 82.9 ×18.5× 103 mm

(Excluding buttons and controls)

Mass

: Approx. 124 g (without battery)

AC adaptor (AA-R9017)

Input power source

: AC 230 V, 50 Hz

Output voltage

: DC 9 V, 500 mA

Design and specifications are subject to change without notice.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

Muting a pip tone

When you press the buttons on the remote control, a pip tone is issued except for the

A.C.BASS and VOLUME +, buttons.

To mute the pip tone,

while pressing and holding the JOG MODE button in Stop mode or dur-

ing playback, press the P.MODE button. "BEEP OFF" appears on the display.

To resume a pip sound,

do the same operation again. "BEEP ON" will appear on the display.

Turning off the backlight

When you turn off the backlight, you can save the battery life.

To turn off the backlight,

while pressing and holding the JOG MODE button in Stop mode or

during playback, press the DISPLAY button. "LIGHT OFF" appears on the display.

To resume backlighting,

do the same operation again. "LIGHT ON" appears on the display.

Turning off the unit will also resume backlighting.

Using the Unit with Optional Accessories

Using the unit with an audio system

You can listen to MDs through your audio system.

· Connect a stereo connection cable (not supplied) as shown below after turning off the amplifier.

· Adjust the volume level of the unit to an appropriate level.

· Adjust the volume level on the amplifier.

· Use the unit's buttons for operation. (The remote control will issue a pip tone.)

· Direct connection without passing through the remote control may generate noise.

Using the unit with a car audio system

You can listen to an MD through your car audio system. The following options are available

for your car audio system.

· Car adaptor (CA-R153)

· Car audio cassette adaptor

En, Sp, It

Printed in Japan

1298MNMCREOZK

(Stop mode)

Normal Play

Follow the numbers in the figure to normal-play.

1 Connect the headphones plug firmly.

2 Connect the remote control plug firmly.

3 Release the HOLD switches.

4 Load an MD.

· Press the EJECT button to open the lid.

· Insert the MD into the MD slot, with its label side facing up. Insert the MD until it stops.

Be sure % or ] mark on the MD directs as shown in the figure.

· Close the lid.

"Toc Reading" appears on the display. Then the track number and playback time appear.

5 Adjust the volume level between 0 and 25.

Press the Volume +, button on the unit or turn the JOG dial to the right or left. To continu-

ously change the volume leve l, depress the volume button or keep turning the JOG dial.

6 Press the 38 /7 button.

Playback starts from the first track and ends after playing all the tracks of the MD.

Notes:

· If no MD is loaded, "NO DISC" appears on the display and the power will be automatically

shut off after approx. 10 seconds.

· If the MD is recorded in Monaural mode, "MONO" will appear on the display.

· To eject the MD, press the EJECT button to open the lid. Then, the MD comes out.

Reinforcing the Bass Sound (A.C.BASS)

Press the A.C.BASS button to activate the active clear bass function.

The "BASS" indicator appears on the display. The bass level is automatically controlled in con-

junction with the sound volume.

To cancel the function,

press the same button again to light off the "BASS" indicator.

Setting the FAV (Favorite) Music

You can register the music to be played at the beginning of MD playback. You can see whether

this function is set or not from the "FAV" indicator on the display.

Play the desired track and press the FAV button for 1 second or more.

The "FAV" indicator blinks on the display while the track is being played. After that, it stays lit.

To play the FAV music,

play the MD in which FAV information is registered. The "FAV" indi-

cator blinks on the display and your favorite music is firstly played. After the FAV music, the

first track of the MD is played.

To cancel the FAV music,

in Stop mode, press the FAV button for 1 second or more. "FAV

DELETE" blinks on the display twice.

Notes:

· You can register only 1 track as for FAV music. New registration will overwrite the previous

setting.

· The FAV information on the MD will be deleted if additional recording or editing such as

MOVE and ERASE is made with the other MD recorders.

· If you start to play the MD with FAV music after removing it once, the FAV music may not

firstly start though the "FAV" indicator lights up. In this case, press the FAV button to play

the FAV music.

Resume Play

This function allows you to listen from the beginning of the track where play stopped because

of the unit was set to Stop mode.

Press the 38 /7 button.

Showing the Disc Information

Each time you press the DISPLAY button in Stop mode or during playback, the disc informa-

tion is displayed as follows.

In Stop mode:

Disc title* = Total track number and total playback time of the MD = Track title* = Track

number and its playback time = (back to the beginning)

During Playback:

Track title* = Track number and its playing time = (back to the beginning)

*: The disc title or track title will scroll if it consists of 11 characters or more. If no title is given,

"NO TITLE" appears on the display.

Disc mark turns.

Number of tracks being played

Playing time

VOL

JOG

MODE

VOL

JOG

MODE

C.BASS

VOL

JOG

MODE

A.C.BASS

VOL

JOG

MODE

C.BASS

Stereo connection

cable (not supplied)

Amplifier

Car adaptor (CA-R153)

Car audio cassette adaptor

(3.5 mm dia. stereo plug)

A.C.BASS button

VOL

JOG

MODE

A.C.BASS

HOLD

VOL

JOG

MODE

A.C.BASS

EJECT

LOCK

VOLUME

EJECT

PORTABLE

MINIDISC

PLAYER

XM-PJ

LOCK

VOLUME

VOL

JOG

MODE

A.C.BASS

VOL

JOG

MODE

A.C.BASS

Charger/adaptor (AC-R124)

Input power source

: DC 9 V, 0.5 A

Output voltage

: DC1.5 V, 0.7 A

ENGLISH