INSTRUCTIONS
UX-Z7MD--Consists of CA-UXZ7MD and SP-UXZ7MD
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0900-007A
[UF]
MICRO COMPONENT MD SYSTEM
TA/News/Info
CA-UXZ7MD
SP-UXZ7MD
--
UX-Z7MD[UF]Cover_f
02.8.6, 13:13
1
G-1
Warnings, Cautions and Others
Caution--
button!
Disconnect the mains plug to shut the power off completely. The
button in any position does not disconnect the mains line. The power
can be remote controlled.
UX-Z7MD[UF]Safety_f
02.8.6, 13:14
1
English
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1.
Do not remove screws, covers or cabinet.
2.
Do not expose this appliance to rain or moisture.
G-2
CAUTION
·
Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to
get out.)
·
Do not place any naked flame sources, such as
lighted candles, on the apparatus.
·
When discarding batteries, environmental problems
must be considered and local rules or laws governing
the disposal of these batteries must be followed
strictly.
·
Do not expose this apparatus to rain, moisture,
dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the
apparatus.
UX-Z7MD[UF]Safety_f
02.8.6, 13:14
2
10 cm
1 cm
1 cm
15 cm
15 cm
15 cm
15 cm
15 cm
15 cm
Front view
Side view
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions
below.
3 Bottom:
Place on the level surface. Maintain an adequate air path for ventilation by
placing on a stand with a height of 10 cm or more.
G-3
UX-Z7MD
UX-Z7MD
UX-Z7MD[UF]Safety_f
02.8.6, 13:14
3
English
G-4
REPRODUCTION OF LABELS /
CLASS
1
LASER
PRODUCT
IMPORTANT FOR LASER PRODUCTS /
1
CLASSIFICATION LABEL ON EXTERIOR SURFACE
2
WARNING LABEL INSIDE THE UNIT
1. CLASS 1 LASER PRODUCT
2. CAUTION: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to
beam.
3. CAUTION: Do not open the top cover. There are no
user serviceable parts inside the Unit; leave all
servicing to qualified service personnel.
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
telse for stråling
(d)
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad.
Betrakta
ej
strålen.
(s)
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM.
(e)
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
alttiina
näkymättömälle
lasersäteilylle. Älä katso
säteeseen.
(f)
UX-Z7MD[UF]Safety_f
02.8.6, 13:14
4