INSTRUCTIONS
LCD VIDEO MONITOR
LM-15G
Thank you for purchasing this JVC LCD video monitor. Before using it, read
and follow all instructions carefully to take full advantage of the monitor's
capabilities.
(* "LCD" stands for Liquid Crystal Display.)
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this
information
for future reference.
Model No. : LM-15G
Serial No. :
P2
Contents
Safety Precautions
.................................................................................................... 3
Installation
.................................................................................................................. 5
Unpacking the Monitor................................................................................................. 5
Controls and Features ................................................................................................. 5
Using Your Monitor
.................................................................................................. 7
Turning the Monitor On and Off ................................................................................. 7
Caring for and Cleaning the Monitor .......................................................................... 7
Using the Menu
........................................................................................................ 8
Summary of Control Buttons........................................................................................ 8
Menu Operations ......................................................................................................... 8
Using the Monitor in the PC mode............................................................................... 13
Basic Connection Example
..................................................................................... 14
Troubleshooting
....................................................................................................... 15
Specifications
..............................................................................................................16
P3
SAFETY PRECAUTIONS
In order to prevent any fatal accidents caused by disoperation or mishandling the monitor, be fully aware of all the
following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present
inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service
personnel. Never try to service it yourself.
WARNING:
THIS APPARATUS MUST BE EARTHED.
This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by JVC could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
PRECAUTIONS
Use only the power source specified on the unit.
When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from
the AC outlet.
Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do
not overload wall outlets or power cords as this can result in a fire or electric shock.
Avoid using this unit under the following conditions:
in extremely hot, cold or humid places,
in dusty places,
near appliances generating strong magnetic fields,
in places subject to direct sunlight,
in badly ventilated places,
in automobiles with doors closed.
Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
When dust accumulates on the screen surface, clean it with a soft cloth.
P4
Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
when the power cord is frayed or the plug is damaged,
if liquid has been spilled into the unit,
if the unit has been dropped or the cabinet has been damaged,
when the unit exhibits a distinct change in performance.
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service personnel.
When replacement parts are required, have the service personnel verify in writing that the replacement parts
he/she uses have the same safety characteristics as the original parts. Use of manufacture's specified
replacement parts can prevent fire, shock, or other hazards.
Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety
check described in the manufacturer's service literature.
When this unit reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask
qualified service personnel to dispose of this unit.
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For
European countries or United Kingdom), the power cord attached conforms to the following power supply voltage
and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage :
AC 120 V
AC 230 V
AC 230 V
AC 220V
Countries :
U.S.A. and Canada
European countries
United Kingdom
Chinese
Warning:
Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock or
fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a
correctly rated approved type, re-fit the fuse cover. (Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver,
And replace the fuse.
(* An example is shown in the illustration.)
P5
Installation
Please follow the instructions in this chapter to install your LCD Monitor.
Note: Before connecting your monitor, first read through the instructions in this chapter and the safety precautions in
the previous chapter.
Unpacking the Monitor
When you are unpacking the monitor, make sure that you have the following items:
The LCD monitor
AC power cord
Stand and screw
This instruction book
Note: Place the monitor on a flat, sturdy surface. Choose an area free from excessive heat, moisture, and sunlight.
Attach the supplied stand to the monitor as shown, and then fix it with the screws. Please fix the stand with the
supplied screw (A) first, and then fix it with the screws (B).
Controls and Features
1
2
3
4
5
6
7
8
9
10