BEDIENUNGSANLEITUNG : LCD-VIDEO-MONITOR
MANUEL D'INSTRUCTIONS : MONITEUR VIDEO LCD
MANUALE DI ISTRUZIONI : MONITOR VIDEO LCD
INSTRUCCIONES : MONITOR DE VIDEO LCD
!"#$%&'(&)
INSTRUCTIONS
LM-10W
LCD VIDEO MONITOR
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
====
PHASE
CHROMA BRIGHT CONTRAST
MENU
INPUT SELECT
VOLUME/SELECT
+
B
A
POWER
Y/C
000
1.2.7, 9:15 PM
1
000
1.2.7, 9:15 PM
2
ENGLISH
INSTRUCTIONS
LCD VIDEO MONITOR
LM-10W
Thank you for purchasing this JVC LCD video monitor. Before using it, read
and follow all instructions carefully to take full advantage of the monitor's
capabilities.
(* "LCD" stands for Liquid Crystal Display.)
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet. Retain this information
for future reference.
Serial No.
:
Model No.
:
LM-10W
LCT0883-001A
01.2.8, 14:03
3
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
To reduce the risk of electric shock, do not remove
cover.
Refer servicing to qualified service personnel.
When installing this unit, be sure that it is located near
an easily accessible electrical outlet.
This unit automatically enters the stand-by mode or
turns on when the power cord is plugged into an AC
outlet. Switching the power button off does not cut the
power completely. For safety, unplug the power cord
from the AC outlet when the unit is not in use.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
PRECAUTIONS
Use only the power source specified on the unit.
When not using this unit for a long period of time, or when
cleaning it, be sure to disconnect the power plug
from the AC outlet.
Do not allow anything to rest on the power cord. And do not
place this unit where people will tread on the cord.
Do not overload wall outlets or power cords as this can
result in a fire or electric shock.
Avoid using this unit under the following conditions:
in extremely hot, cold or humid places,
in dusty places,
near appliances generating strong magnetic fields,
in places subject to direct sunlight,
in badly ventilated places,
in automobiles with doors closed.
Do not cover the ventilation slots while in operation as this
could obstruct the required ventilation flow.
When dust accumulates on the screen surface, clean it with
a soft cloth.
Unplug this unit from the AC outlet and refer servicing to
qualified service personnel under the following conditions:
when the power cord is frayed or the plug is damaged,
if liquid has been spilled into the unit,
if the unit has been dropped or the cabinet has been
damaged,
when the unit exhibits a distinct change in performance.
2
SAFETY PRECAUTIONS
FCC NOTICE (U.S.A. only)
CAUTION: Changes or modifications not approved by
JVC could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
Do not attempt to service this unit yourself as opening or
removing covers may expose you to dangerous voltage or
other hazards. Always refer servicing to qualified service
personnel.
When replacement parts are required, have the service
personnel verify in writing that the replacement parts he/
she uses have the same safety characteristics as the
original parts. Use of manufacture's specified replacement
parts can prevent fire, shock, or other hazards.
Upon completion of any servicing or repair work to this unit,
please ask the service personnel to perform the safety
check described in the manufacturer's service literature.
When this unit reaches the end of its useful life, improper
disposal could result in an LCD panel implosion. Ask
qualified service personnel to dispose of this unit.
LCT0883-001A
01.2.8, 14:03
4
ENGLISH
CONTENTS
SAFETY PRECAUTIONS ................................................................................. 2
CONTROLS AND FEATURES ......................................................................... 4
HOW TO HANDLE BASIC OPERATIONS ....................................................... 6
HOW TO USE THE MENU FUNCTIONS.......................................................... 7
HOW TO INITIALISE THE SETTING.............................................................. 10
BASIC CONNECTION EXAMPLE ................................................................... 11
TROUBLESHOOTING .................................................................................... 13
SPECIFICATIONS .......................................................................................... 14
Fuse
3
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries
or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power
cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V
AC 230 V
AC 230 V
Countries
: U.S.A. and Canada
European countries
United Kingdom
Warning:
Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock
or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated
approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse
Open the fuse compartment with the blade screw driver, and
replace the fuse.
(* An example is shown in the illustration.)
After image phenomenon
When a still image has been displayed for a long period, a faint residual image may remain on the screen after the
power has been turned off or when another image is displayed. This is a normal characteristic of the LCD (Liquid
Crystal Display) and is not a malfunction.
LCT0883-001A
01.2.8, 14:03
5