CD/CASSETTE RECEIVER
KW-XC888
INSTRUKSI
LVT1139 - 002A
(UN)
INSTRUCTIONS
ENGLISH
INDONESIA
2
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user serviceable parts inside unit; leave all
servicing to qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid
direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.
CAUTION on Volume Setting
CDs produce very little noise compared with other sources. If the volume level is adjusted for the tuner, for
example, the speakers may be damaged by the sudden increase in the output level. Therefore, lower the
volume before playing a CD and adjust it as required during playback.
How to reset your unit
Press the reset button on the front panel using
a ball-point pen or similar tool.
Note:
Your preset adjustments--such as preset channels
or sound adjustments--will be erased.
ENGLISH
3
CONTENTS
How to reset your unit ....................................
2
LOCATION OF THE BUTTONS ............
4
BASIC OPERATIONS .......................
5
RADIO OPERATIONS ......................
6
Listening to the radio .................................
6
Storing stations in memory .......................
7
Tuning in to a preset station ......................
8
Selecting FM reception mode ...................
8
CD OPERATIONS ...........................
9
Playing a CD .............................................
9
Locating a track or a particular portion
on a CD ................................................. 10
Selecting CD playback modes .................. 10
TAPE OPERATIONS ........................ 11
Listening to a tape ..................................... 11
Finding the beginning of a tune ................. 12
Other convenient tape functions ............... 13
SOUND ADJUSTMENTS ................... 14
CD CHANGER OPERATIONS .............. 15
About MP3 discs ....................................... 15
Connecting the CD changer ...................... 16
Playing discs ............................................. 16
Locating a track or a particular portion
on a disc ................................................ 17
Locating a disc in the magazine ................ 17
Locating a folder on a disc ........................ 18
Selecting the playback modes .................. 18
ADDITIONAL INFORMATION ............. 19
Handling cassettes .................................... 19
Handling discs ........................................... 20
TROUBLESHOOTING ...................... 21
SPECIFICATIONS ........................... 23
BEFORE USE
*For safety....
· Do not raise the volume level too much, as this will
block outside sounds, making driving dangerous.
· Stop the car before performing any complicated
operations.
*Temperature inside the car....
If you have parked the car for a long time in hot or
cold weather, wait until the temperature in the car
becomes normal before operating the unit.
ENGLISH
4
LOCATION OF THE BUTTONS
1 Display window
2 CD loading slot
3
ATT
/
(standby/on/attenuator) button
4 LOUD (loudness) button
5 MONO (monaural) /SSM button
6 Source buttons
· CD/CD-CH button
· FM/AM button
· TAPE (PROG) button
7 Number buttons
· B.SKIP/RND (blank skip/random) button
· RPT (repeat) button
·
DISC button
· DISC
button
·
FOLDER button
· FOLDER
button
8 Cassette compartment
9 CD
0 (eject) button
p
¢
button
q
4
button
w SEL (select) button
e Tape
0 (eject) button
r Control dial
t Reset button
Display window
y Source indicators
CD, CD-CH (CD-changer), TAPE, FM1, FM2,
FM3, AM
u MP3 indicator
i RPT (repeat) indicator
o RND (random) indicator
; Tuner reception indicators
MO (monaural), ST (stereo)
a B.SKIP (blank skip) indicator
s LOUD (loudness) indicator
d ATT (attenuator) indicator
f CD-in indicator
g Main display
ENGLISH
Control Panel
5
1 Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2 Select the source.
· Each time you press CD/
CD-CH, the source alternates
between CD* and CD-
changer**.
· Each time you press FM/AM, the
band changes to FM (FM1,
FM2, FM3) and AM.
· Press TAPE (PROG), so that the
source is selected as TAPE***.
*
If a disc is not in the loading slot, you cannot
select CD as the source to play. ("NO DISC" will
appear on the display.)
**
Without connecting the CD changer, you cannot
select it as the source to play.
*** If a cassette is not in the cassette compartment,
you cannot select TAPE as the source to play.
("NO TAPE" will appear on the display.)
To operate the tuner, see pages 6 8.
To play the CD, see pages 9 and 10.
To operate the tape deck, see pages 11 13.
To operate the CD changer, see pages 15 18.
3 Adjust the volume.
4 Adjust the sound as you want
(see page 14).
To drop the volume immediately
Press
ATT
/
briefly while listening to any
source. The ATT indicator starts flashing on the
display, and the volume level will drop
immediately.
To resume the previous volume level, press
the button briefly again.
To turn off the power
Press
ATT
/
for more than 1 second.
· If you turn off the power while listening to a
CD, the CD play will start from where playback
has been stopped previously, next time you
turn on the power.
· If you turn off the ignition key without
turning off this unit, the unit will
automatically turn on when you turn on the
ignition key next time. If the last selected
source is ready for playback (ex. a CD or a
tape is in the unit), playback starts
automatically.
BASIC OPERATIONS
To increase the volume
To decrease the volume
Volume level
ENGLISH