JVC KW-XC410J - Owner's Manual Immediate Download

ENGLISH

ESPAÑOL

FRANÇAIS

CD/CASSETTE RECEIVER

KW-XC410/KW-XC400

For canceling the display demonstration, see page 8.

Para cancelar la demostración en pantalla, consulte la página 8.

Pour annuler la démonstration des affichages, référez-vous à la page 8.

For installation and connections, refer to the separate manual.

Para la instalación y las conexiones, refiérase al manual separado.

Pour l'installation et les raccordements, se référer au manuel séparé.

INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

For customer Use:

Enter below the Model

No. and Serial No. which

are located on the top or

bottom of the cabinet.

Retain this information

for future reference.

Model No.

Serial No.

GET0320-001B

[J]

RECEPTOR CON CD/CASSETTE KW-XC410/KW-XC400

RECEPTEUR CD/CASSETTE

KW-XC410/KW-XC400

Cover_KW-XC410_400[J]f.indd 2

10/31/05 5:25:15 PM

ENGLISH

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you may

be involved in a traffic accident.

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

How to forcibly eject a disc

If a disc cannot be recognized or cannot be

ejected, eject the disc as follows.

· If this does not work, reset your unit.

· Be careful not to drop the disc when it

ejects.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

INFORMATION (For U.S.A.)

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

EN02-05_KW-XC400[J]1.indd 2

9/29/05 12:43:23 PM

ENGLISH

How to reset your unit ...........................

How to forcibly eject a disc ...................

How to read this manual ........................

How to use the MODE button ...............

Control panel --

KW-XC410/KW-XC400

............... 5

Parts identification .................................

Remote controller -- RM-RK50 ... 6

Main elements and features ...................

Getting started....................... 7

Basic operations..................................

Canceling the display demonstrations ...

Setting the clock ....................................

Radio operations ................... 9

Listening to the radio...........................

Storing stations in memory....................

Listening to a preset station ................... 10

Scanning broadcast stations................... 10

Assigning titles to the stations ............... 11

Disc operations ...................... 12

Playing a disc in the unit ..................... 12

Playing discs in the CD changer ........... 13

Other main functions ............................. 15

Changing the display information ......... 15

Selecting the playback modes................ 16

Tape operations ..................... 17

Playing a tape..................................... 17

Finding the beginning of a tune ............. 17

Other convenient tape functions ............ 17

Sound adjustments ................ 18

Selecting preset sound modes

(EQ: equalizer)................................. 18

Adjusting the sound ............................... 18

Storing your own sound adjustments..... 19

General settings -- PSM ......... 20

Basic procedure ..................................... 20

External component operations... 23

Playing an external component ............ 23

Satellite radio operations ....... 24

Listening to the SIRIUS Satellite radio... 25

Listening to the XM Satellite radio ....... 25

Storing channels in memory .................. 26

Listening to a preset channel ................. 26

Maintenance .......................... 27

Handling discs ....................................... 27

Handling cassettes ................................. 27

More about this unit............... 28

Troubleshooting ..................... 31

Specifications ......................... 33

Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

For safety....

· Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

· Stop the car before performing any

complicated operations.

EN02-05_KW-XC410_400[J]f.indd 3

10/31/05 5:09:21 PM

ENGLISH

How to read this manual

The following methods are used to make the

explanations simple and easy-to-understand:

· Some related tips and notes are explained in

"More about this unit" (see pages 28 30).

· Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

How to use the MODE button

Press MODE repeatedly to select the different

functions available during play.

Time countdown indicator

Ex.: When "SSM" is selected

While listening to the radio:

· You cannot select "SSM" or "SCAN"

if you are listening to the station stored

in the EX (extra) button, see page 10 for

details.

While listening to a disc:

While listening to a tape:

While adjusting the sound mode:

· Pressing MODE allows you to store the

adjusted sound mode into memory. (See

page 19 for details.)

* Depending on the level meter setting. (See

page 20 for details.)

SSM

SCAN

MONO

Canceled

(Station frequency)*

DOLBY B

B.SKIP

REPEAT

RANDOM

INTRO

Canceled

(Track no. and

Elapsed playing time)*

Canceled

(Playback direction)*

10 +10

This unit is equipped with the steering

wheel remote control function.

· See the Installation/Connection Manual

(separate volume) for connection.

EN02-05_KW-XC400[J]1.indd 4

9/29/05 12:43:24 PM

ENGLISH

Control panel -- KW-XC410/KW-XC400

1 Loading slot

(standby/on attenuator) button

3 DISP (display) button

4 MODE button

5 Cassette compartment

6 Remote sensor

· DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

7 AUX (auxiliary) input jack

8 Number buttons

9 CD

0 (CD eject) button

p Display window

5 (up) / (down) buttons

PROG (program)

5 / buttons

¢ buttons

e SEL (select) button

r T

0 (tape eject) button

t Control dial

y Reset button

u Source buttons--CD/CD-CH, TAPE/AUX,

FM/AM SAT (satellite), EX (extra)

Display window

i Tuner reception indicators--ST (stereo),

MO (monaural)

o Disc information indicators--

(track/file), TAG (ID3 Tag),

(folder)

; Text name indicators--DISC, STATION

a Main display, level meter

s Clock indicator

d EQ (equalizer) indicator

f LOUD (loudness) indicator

(Dolby B NR) indicator

h Playback disc indicators--MP3, WMA

j B.SKIP (blank skip) indicator

k Source display

l Level meter, volume meter, time countdown

indicator

/ Playback mode indicators--DISC,

(folder), RND (random), RPT (repeat),

INT (intro),

(track/file), MAG (magazine)

z Loaded source indicators--

(disc),

(tape)

Parts identification

Display window

EN02-05_KW-XC410_400[J]f.indd 5

10/31/05 4:59:07 PM