JVC KW-XC404UI - Owner's Manual Immediate Download

ENGLISH

CD/CASSETTE RECEIVER

KW-XC406/KW-XC405

For canceling the display demonstration, see page 8.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0327-001A

[U]

Cover_KW-XC406_5_001A_f.indd 2

8/3/05 10:37:10 AM

ENGLISH

Warning:

If you need to operate the unit while driving,

be sure to look ahead carefully or you may

be involved in a traffic accident.

How to reset your unit

This will reset the microcomputer. Your

preset adjustments will also be erased.

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Caution on volume setting:

Discs produce very little noise compared

with other sources. Lower the volume

before playing a disc to avoid damaging

the speakers by the sudden increase of the

output level.

How to forcibly eject a disc

If a disc cannot be recognized or cannot be

ejected, eject the disc as follows.

· If this does not work, reset your unit.

· Be careful not to drop the disc when it

ejects.

EN02-05_KW-XC406_405[U]f.indd 2

7/26/05 9:27:21 AM

ENGLISH

How to reset your unit ...........................

How to forcibly eject a disc ...................

How to read this manual ........................

How to use the MODE button ...............

Control panel --

KW-XC406/KW-XC405

............... 5

Parts identification .................................

Remote controller -- RM-RK50 ... 6

Main elements and features ...................

Getting started....................... 7

Basic operations..................................

Canceling the display demonstrations ...

Setting the clock ....................................

Radio operations ................... 9

Listening to the radio...........................

Storing stations in memory....................

Listening to a preset station ................... 10

Scanning broadcast stations................... 10

Assigning titles to the stations ............... 11

Disc operations ...................... 12

Playing a disc in the unit ..................... 12

Playing discs in the CD changer ........... 13

Other main functions ............................. 15

Changing the display information ......... 15

Selecting the playback modes................ 16

Tape operations ..................... 17

Playing a tape..................................... 17

Finding the beginning of a tune ............. 17

Other convenient tape functions ............ 17

Sound adjustments ................ 18

Selecting preset sound modes

(EQ: equalizer)................................. 18

Adjusting the sound ............................... 18

Storing your own sound adjustments..... 19

General settings -- PSM ......... 20

Basic procedure ..................................... 20

External component operations... 22

Playing an external component ............ 22

Maintenance .......................... 23

Handling discs ....................................... 23

Handling cassettes ................................. 23

More about this unit............... 24

Troubleshooting ..................... 27

Specifications ......................... 29

Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

Contents

For safety....

· Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

· Stop the car before performing any

complicated operations.

EN02-05_KW-XC406_405[U]f.indd 3

7/26/05 9:27:23 AM

ENGLISH

How to use the MODE button

Press MODE repeatedly to select the different

functions available during play.

Time countdown indicator

Ex.: When "SSM" is selected

While listening to the radio:

· You cannot select "SSM" or "SCAN"

if you are listening to the station stored

in the EX (extra) button, see page 10 for

details.

While listening to a disc:

While listening to a tape:

While adjusting the sound mode:

· Pressing MODE allows you to store the

adjusted sound mode into memory. (See

page 19 for details.)

* Depending on the level meter setting. (See

page 20 for details.)

How to read this manual

The following methods are used to make the

explanations simple and easy-to-understand:

· Some related tips and notes are explained in

"More about this unit" (see pages 24 26).

· Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

SSM

SCAN

MONO

Canceled

(Station frequency)*

DOLBY B

B.SKIP

REPEAT

RANDOM

INTRO

Canceled

(Track no. and

Elapsed playing time)*

Canceled

(Playback direction)*

10 +10

EN02-05_KW-XC406_405[U]f.indd 4

7/26/05 9:27:24 AM

ENGLISH

Control panel -- KW-XC406/KW-XC405

1 Loading slot

(standby/on attenuator) button

3 DISP (display) button

4 MODE button

5 Cassette compartment

6 Remote sensor

· DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

7 AUX (auxiliary) input jack

8 Number buttons

9 CD

0 (CD eject) button

p Display window

5 (up) / (down) buttons

PROG (program)

5 / buttons

¢ buttons

e SEL (select) button

r T

0 (tape eject) button

t Control dial

y Reset button

u Source buttons--CD/CD-CH, TAPE/AUX,

FM/AM, EX (extra)

Display window

i Tuner reception indicators--ST (stereo),

MO (monaural)

o Disc information indicators--

(track/file), TAG (ID3 Tag),

(folder)

; Text name indicators--DISC, STATION

a Main display, level meter

s Clock indicator

d EQ (equalizer) indicator

f LOUD (loudness) indicator

(Dolby B NR) indicator

h Playback disc indicators--MP3, WMA

j B.SKIP (blank skip) indicator

k Source display

l Level meter, volume meter, time countdown

indicator

/ Playback mode indicators--DISC,

(folder), RND (random),

RPT (repeat), INT (intro),

(track/file),

MAG (magazine)

z Loaded source indicators--

(disc),

(tape)

Parts identification

Display window

EN02-05_KW-XC406_405[U]f.indd 5

8/3/05 10:38:14 AM