JVC KD-G464UI - Owner's Manual Immediate Download

CD RECEIVER

For canceling the display demonstration, see page 7.

For installation and connections, refer to the separate manual.

INSTRUCTIONS

GET0302-001B

[UI]

KD-G464

Cover_KD-G464[UI]ff.indd 2

3/3/05 3:15:24 PM

Thank you for purchasing a JVC product.

Please read all instructions carefully before operation, to ensure your complete understanding and to

obtain the best possible performance from the unit.

IMPORTANT FOR LASER PRODUCTS

1. CLASS 1 LASER PRODUCT

2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave

all servicing to qualified service personnel.

3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT.

Warning:

If you need to operate the receiver while

driving, be sure to look ahead carefully or

you may be involved in a traffic accident.

How to reset your unit

· This will reset the microcomputer. Your

preset adjustments will also be erased.

· If a disc is loaded, it will eject. Be careful

not to drop the disc.

How to forcibly eject a disc

If a disc cannot be recognized by the

receiver or cannot be ejected, ejects the disc

as follows.

· If this does not work, reset your receiver.

· Be careful not to drop the disc when it

ejects.

EN02-05_KD-G464[UI]1.indd 2

12/22/04 11:57:22 PM

How to reset your unit ...........................

How to forcibly eject a disc ...................

How to read this manual ........................

How to use the MODE button ...............

Control panel -- KD-G464 ......... 5

Parts identification .................................

Remote controller -- RM-RK50 ... 6

Main elements and features ...................

Getting started....................... 7

Basic operations..................................

Canceling the display demonstrations ...

Setting the clock ....................................

Radio operations ................... 9

Listening to the radio...........................

Storing stations in memory.................... 10

Listening to a preset station ................... 10

Disc operations ...................... 11

Playing a disc in the receiver................ 11

Playing discs in the CD changer ........... 12

Other main functions ............................. 14

Changing the display information ......... 15

Selecting the playback modes................ 16

Sound adjustments ................ 17

Selecting preset sound modes

(C-EQ: custom equalizer) .................. 17

Adjusting the sound ............................... 18

General settings -- PSM ......... 19

Basic procedure ..................................... 19

Detaching the control panel.... 21

External component operations... 22

Playing an external component ............ 22

Maintenance .......................... 23

More about this receiver ........ 24

Troubleshooting ..................... 26

Specifications ......................... 29

*For safety....

· Do not raise the volume level too much, as

this will block outside sounds, making driving

dangerous.

· Stop the car before performing any

complicated operations.

Contents

*Temperature inside the car....

If you have parked the car for a long time in

hot or cold weather, wait until the temperature

in the car becomes normal before operating the

unit.

EN02-05_KD-G464[UI]1.indd 3

12/22/04 11:57:24 PM

How to read this manual

The following methods are used to made the

explanations simple and easy-to-understand:

· Some related tips and notes are explained in

"More about this receiver" (see pages 24 and

25).

· Button operations are mainly explained with

the illustrations as follows:

Press briefly.

Press repeatedly.

Press either one.

Press and hold until

your desired response

begins.

Press and hold both

buttons at the same

time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

How to use the MODE button

If you press MODE, the receiver goes into

functions mode, then the number buttons and

5/ buttons work as different function buttons.

Ex.: When number button 2 works as

MO (monaural) button.

Time countdown indicator

To use these buttons for original functions

again after pressing MODE, wait for

5 seconds without pressing any of these buttons

until the functions mode is cleared.

· Pressing MODE again also clears the

functions mode.

EN02-05_KD-G464[UI]1.indd 4

12/22/04 11:57:24 PM

Control panel -- KD-G464

Display window

(standby/on attenuator) button

2 SEL (select) button

3 BAND button

4 SOURCE button

5 Loading slot

6 Display window

0 (eject) button

8 EQ (equalizer) button

9 Remote sensor

· DO NOT expose the remote sensor to

strong light (direct sunlight or artificial

lighting).

5 (up) button / +10 button

q Control dial

w Number buttons

e MO (monaural) button

r SSM (Strong-station Sequential Memory)

button

t RPT (repeat) button

y RND (random) button

u MODE button

i DISP (display) button

4/¢

buttons

;

(control panel release) button

(down) button / 10 button

Display window

s Tuner reception indicators--

MO (monaural), ST (stereo)

d Disc type indicators--WMA, MP3

f Playback source indicators--

CH: Lights up only when CD-CH is selected

as the playback source.

CD: Lights up for the built-in CD player.

g Playback mode / item indicators--

RND (random),

(disc),

(folder),

RPT (repeat)

h LOUD (loudness) indicator

j EQ (equalizer) indicator

k Sound mode (C-EQ: custom equalizer)

indicators--ROCK, CLASSIC, POPS,

HIP HOP, JAZZ, USER

also works as the time countdown

indicator.

l Disc information indicators--TAG (ID3

Tag),

(folder),

(track/file)

/ Main display

z Source display / Volume level indicator

x Tr (track) indicator

Parts identification

EN02-05_KD-G464[UI]1.indd 5

12/22/04 11:57:25 PM