background image
ENGLISH
ESPAÑOL
FRANÇAIS
CD RECEIVER
KD-AR270/KD-G220
RECEPTOR CON CD
KD-AR270/KD-G220
RECEPTEUR CD
KD-AR270/KD-G220
For canceling the display demonstration, see page 5.
Para cancelar la demostración en pantalla, consulte la página 5.
Pour annuler la démonstration des affichages, référez-vous à la page 5.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
GET0335-001A
[J]
KD-AR270
KD-G220
Cover_KD-AR270_G220[J]f.indd 2
Cover_KD-AR270_G220[J]f.indd 2
10/4/05 6:21:14 PM
10/4/05 6:21:14 PM


background image
ENGLISH
2
Thank you for purchasing a JVC product.
Please read all instructions carefully
before operation, to ensure your complete
understanding and to obtain the best possible
performance from the unit.
INFORMATION (For U.S.A.)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there
is no guarantee that interference will not
occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can
be determined by turning the equipment
off and on, the user is encouraged to try to
correct the interference by one or more of
the following measures:
­ Reorient or relocate the receiving antenna.
­ Increase the separation between the
equipment and receiver.
­ Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
­ Consult the dealer or an experienced radio/
TV technician for help.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover.
There are no user serviceable parts inside
the unit; leave all servicing to qualified
service personnel.
3. CAUTION: Visible and invisible laser
radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
Warning:
If you need to operate the unit while driving,
be sure to look ahead carefully or you may be
involved in a traffic accident.
How to reset your unit
· Your preset adjustments will also be erased.
· If a disc is loaded, it will eject. Be careful not to
drop the disc.
How to forcibly eject a disc
· If this does not work, reset your unit.
· Be careful not to drop the disc when it ejects.
How to use the M MODE button
If you press M MODE, the unit goes into
functions mode, then the number buttons
and
¢/4
buttons work as different
function buttons.
Ex.: When number button 2 works as
MO (monaural) button.
To use these buttons for their original
functions again after pressing M MODE, wait
for 5 seconds without pressing any of these
buttons until the functions mode is cleared or
press M MODE again.
Time countdown indicator
EN02-05_KD-AR270_G220[J]f.indd 2
EN02-05_KD-AR270_G220[J]f.indd 2
10/4/05 6:21:22 PM
10/4/05 6:21:22 PM


background image
ENGLISH
3
CONTENTS
Control panel -- KD-AR270 and KD-G220....... 4
Getting started................................. 5
Basic operations....................................................
5
Radio operations .............................. 6
Disc operations................................. 7
Playing a disc in the unit .......................................
7
Sound adjustments........................... 9
General settings -- PSM ................... 10
Remote controller -- RM-RK60.............. 12
Maintenance .................................... 13
More about this unit ......................... 14
Troubleshooting............................... 16
Specifications................................... 17
Caution on volume setting:
Discs produce very little noise compared
with other sources. Lower the volume
before playing a disc to avoid damaging
the speakers by the sudden increase of the
output level.
For safety...
· Do not raise the volume level too much, as
this will block outside sounds, making driving
dangerous.
· Stop the car before performing any
complicated operations.
Temperature inside the car...
If you have parked the car for a long time in hot
or cold weather, wait until the temperature in
the car becomes normal before operating the
unit.
How to read this manual
· Button operations are mainly explained with
the illustrations in the table below.
·
is used to indicate an indicator is
displayed for the corresponding operation.
· Some related tips and notes are explained in
"More about this unit" (see pages 14 and 15).
Press briefly.
Press repeatedly.
Press either
one.
Press and hold until your
desired response begins.
Press and hold both
buttons at the same time.
How to detach/attach the control
panel
Detaching...
Attaching...
EN02-05_KD-AR270_G220[J]f.indd 3
EN02-05_KD-AR270_G220[J]f.indd 3
10/4/05 6:21:25 PM
10/4/05 6:21:25 PM


background image
ENGLISH
4
Control panel -- KD-AR270andKD-G220
1
(standby/on/attenuator) button
2 SOURCE button
3 BAND button
4 Remote sensor
· You can control this unit with an
optionally purchased remote controller. For
details, see page 12.
· DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
5 Loading slot
6 Display window
7
0 (eject) button
8 EQ (equalizer) button
9
¢/4
buttons
p Control dial
q SEL (select) button
w DISP (display) button
e MO (monaural) button
r SSM (Strong-station Sequential Memory)
button
t Number buttons
y RPT (repeat) button
u RND (random) button
i M MODE button
o
(control panel release) button
Display window
; Disc information indicators--TAG (ID3
Tag),
(folder),
(track/file)
a Disc type indicators--WMA, MP3
s DISC indicator
d Playback mode / item indicators--
RND (random),
(disc),
(folder),
RPT (repeat)
f LOUD (loudness) indicator
g EQ (equalizer) indicator
h Sound mode (C-EQ: custom equalizer)
indicators--JAZZ, CLASSIC, HIP HOP,
POPS, ROCK, USER
j Tr (track) indicator
k Source display / Volume level indicator /
Time countdown indicator
l Main display
/ Tuner reception indicators-- ST (stereo),
MO (monaural)
Parts identification
Display window
EN02-05_KD-AR270_G220[J]f.indd 4
EN02-05_KD-AR270_G220[J]f.indd 4
10/14/05 11:35:30 AM
10/14/05 11:35:30 AM


background image
ENGLISH
5
Basic settings
· See also "General settings -- PSM" on pages
10 and 11.
1
2
1 Canceling the display
demonstrations
Select "DEMO," then "DEMO OFF."
2 Setting the clock
Select "CLOCK H" (hour), then adjust
the hour.
Select "CLOCK M" (minute), then
adjust the minute.
3 Finish the procedure.
To check the current clock
time while the power is
turned off
To check the other
information while
listening to the radio
Clock
Ô Frequency
Getting started
Basic operations
~ Turn on the power.
Y
* You cannot select "DISC" as the
playback source if there is no disc in the
unit.
! For FM/AM tuner
/ Adjust the volume.
@ Adjust the sound as you want. (See
page 9.)
To drop the volume in a
moment (ATT)
To restore the sound, press
it again.
To turn off the power
Volume level appears.
Volume level indicator
EN02-05_KD-AR270_G220[J]f.indd 5
EN02-05_KD-AR270_G220[J]f.indd 5
10/18/05 4:22:25 PM
10/18/05 4:22:25 PM