SERVICE MANUAL
COPYRIGHT © 2003 VICTOR COMPANY OF JAPAN, LTD.
No.82956
2003/05
VIDEO CASSETTE RECORDER
82956
2003
05
HR-V600EX,HR-V601EX,HR-V605EF,
HR-V605EK,HR-V606EK,HR-V705EK
SPECIFICATION (The specifications shown pertain specifically to the model HR-V600EX, HR-V601EX)
GENERAL
VIDEO/AUDIO
TUNER/TIMER
ACCESSORIES
(EK model)
(other model)
Regarding service information other than these sections, refer to the service manual No. 82961 (HR-S5960EX).
Also, be sure to note important safety precautions provided in the service manual.
For disassembling and assembling of MECHANISM ASSEMBLY, refer to the SERVICE MANUAL No.86700 (MECHANISM ASSEMBLY).
Power requirement
AC 220 V - 240 V~, 50 Hz/60 Hz
Power consumption
Power on 14 W
Power off 3.2 W
Temperature
Operating 5°C to 40°C
Storage -20°C to 60°C
Operating position
Horizontal only
Dimensions
(W x H x D)
400 mm x 94 mm x 270 mm
Weight
3.1 kg
Format
VHS PAL standard
Maximum recording time
(SP) 240 min. with E-240 video cassette
(LP) 480 min. with E-240 video cassette
Signal system
PAL-type colour signal and CCIR
monochrome signal, 625 lines 50 fields
Recording system
DA4 (Double Azimuth) head helical scan
system
Signal-to-noise ratio
45 dB
Horizontal resolution
250 lines
Frequency range
Normal audio
70 Hz to 10,000 Hz
Hi-Fi audio
20 Hz to 20,000 Hz
Input/Output
21-pin SCART connectors:
IN/OUT x 1, IN/DECODER x 1RCA
connectors:AUDIO OUT x 1
TV channel storage
capacity
99 positions (+AUX position)
Tuning system
Frequency synthesized tuner
Channel coverage
VHF
47 MHz - 89 MHz/104 MHz - 300 MHz/302
MHz - 470 MHz
UHF
470 MHz - 862 MHz
Aerial output
UHF channels 22 - 69 (Adjustable)
Memory backup time
Approx. 10 min.
Provided accessories
: RF cable, Infrared remote control unit,
Lithium battery - CR2032-
Optional accessories
: Satellite Controller RM-SD1
Specifications shown are for SP mode unless specified otherwise.
E. & O.E. Design and specifications subject to change without
notice.
HR-V600EX,HR-V601EX,HR-V605EF,HR-V605EK,HR-V606EK,HR-V705EK
V16D1,V16D1+
1-2 (No.82956)
DIFFERENCE LIST
DIFFERENT TABLE OF FEATURE
The following table indicates main different points between models HR-S5960EX, HR-V600EX, HR-V601EX, HR-V601EX, HR-
V605EF, HR-V605EK, HR-606EK, and HR-V705EK.
Note:
Mark
is same as left.
DIFFERENT TABLE OF PARTS LIST
PACKING AND ACCESSORY ASSEMBLY<M1>
Note:
Mark
is same as left.
Mark
- is not used.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
POWER PLUG
CEE
3PIN
BODY COLOUR
PURE SILVER
PURE SILVER &
DARK.SILVER[WINDO
W/L/R COVER]
PURE SILVER
PURE SILVER &
DARK.SILVER[WINDO
W/L/R COVER]
BLACK
PURE SILVER &
DARK.SILVER[WINDO
W/L/R COVER]
ADVANCED JOG
NOT USED
USED
RCU COLOUR
LIGHT GRAY
MOLD BLACK
LIGHT GRAY
SCART CABLE
OPTIONAL
PROVIDED
OPTIONAL
MESECAM
USED(MANUAL)
USED
NOT USED
DECODER(L-2)
USED
NOT USED
S-VHS
USED
NOT USED
S-VHS ET
USED(PAL SP MODE)
NO
SQPB
NOT USED
USED(PAL SP MODE)
SAT CONTROL TERMINAL
NOT USED
USED
BROADCASTING STANDARD
B/G,D/K
L,L',B/G
I
STEREO DECODER
NICAM/A2
NICAM(L,B/G)/A2(B/G)
NICAM
RF OUT
USED
NOT USED
USED
VCR PLUS+
SHOWVIEW
SHOWVIEW DELUXE
VIDEO PLUS+ DELUXE
OVERLAP WARNING w/OSD
NOT USED
USED
VPS
USED
NOT USED
24H EXPRESS TIMER
PROGRAMMING
NOT USED
USED
DISPLAY PANEL
6-DIGIT LED GREEN
4-DIGIT LED GREEN
OSD LANGUAGE
13 LANGUAGES
FRENCH
ENGLISH
T-V LINK
NOT USED
USED
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
301
PACKING CASE
LP30855-004B
LP30855-003B
306
REMOTE CTL UNIT
LP21138-003C
LP21138-004C
LP21138-003C
306A
COVER(BATTERY)
LP40991-002B
LP40991-001B
LP40991-002B
310
INST.BOOK(ENGLISH)
LPT0751-001B
LPT0750-001B
-
LPT0766-001A
LPT0767-001A
310
INST.BOOK(GERMANY)
LPT0751-002B
LPT0750-002B
----
310
INST.BOOK(FRENCH)
LPT0751-003A
LPT0750-003A
LPT0772-001B
-
-
-
310
INST.BOOK(DUTCH)
LPT0751-004A
LPT0750-004A
----
310
INST.BOOK(SPANISH)
LPT0751-005A
LPT0750-005A
----
310
INST.BOOK(ITALIAN)
LPT0751-006A
LPT0750-006A
----
310
INST.BOOK(DANISH)
LPT0751-007A
LPT0750-007A
----
310
INST.BOOK(FINNISH)
LPT0751-008A
LPT0750-008A
----
310
INST.BOOK(SWEDISH)
LPT0751-009A
LPT0750-009A
----
310
INST.BOOK(NORWEGIAN)
LPT0751-010A
LPT0750-010A
----
310
INST.BOOK(PORTUGUESE)
LPT0751-011A
LPT0750-011A
----
310
INST.BOOK(GREEK)
LPT0751-012A
LPT0750-012A
----
310
INST.BOOK(CZECH)
LPT0751-013A
LPT0750-013A
----
310
INST.BOOK(POLISH)
LPT0751-014A
LPT0750-014A
----
310
INST.BOOK(HUNGARIAN)
LPT0751-015A
LPT0750-015A
----
315
PERI CABLE
-
-
-
QAM0238-003
-
-
-
316
WARRANTY CARD
BT-54013-5
----
317
WARRANTY CARD
-
-
-
BT-54008-4
319
Q.CARD(JUK)
----
LYT0194-001B
(No.82956)1-3
FINAL ASSEMBLY<M2>
MECHANISM ASSEMBLY<M4>
MAIN BOARD ASSEMBLY<03>
ADV JOG BOARD ASSEMBLY<39>
SECAM BOARD ASSEMBLY<88>
SAT CTL BOARD ASSEMBLY<94>
Note:
Mark
is same as left.
Mark
- is not used.
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
501
FRONT PANEL ASSY
LP10452-005C
LP10452-004C
LP10452-012C
LP10452-018B
LP10452-014B
LP10452-015B
LP10452-016C
501A
CASSETTE DOOR
LP21123-003B
LP21123-002A
LP21123-009A
LP21123-002A
501C
COVER(WINDOW)
LP21127-001B
LP21127-006B
LP21127-001B
LP21127-006B
LP21127-008B
LP21127-009B
501D
WINDOW(1)
LP31188-002A
LP31188-001B
LP31188-010A
LP31188-006A
LP31188-008A
501E
COVER(L)
LP31109-002A
LP31109-001A
LP31109-003A
LP31109-007A
LP31109-004A
LP31109-005A
LP31109-006A
501F
COVER(R)
LP30877-003A
LP30877-005A
LP30877-003A
LP30877-005A
LP30877-007A
LP30877-005A
501G
STICKER
LP41035-004A
LP41035-009A
LP41035-010A
501H
BUTTON
-
-
-
-
-
-
LP30876-003A
503
TOP COVER
LP10013-051C
LP10013-061C
LP10013-051C
504
TAP SCREW TOP COVER SIDE QYTDSF3010R
QYTDSF3010M
QYTDSF3010R
510
DRUM FINAL ASSY
PDV2544A
PDV2539A
PDV2541A
PDV2539A
514
POWER CORD
QMP4A10-170
QMP51K0-170-K
519
ROLLER ARM ASSY
LP40370-001F
-
-
----
520
INERTIA PLATE
PQ45160
-
-
----
535
KNOB(ADV.JOG)
-
-
-
-
-
-
LP30875-001B
536
TAP SCREW ADV.JOG
-
-
-
-
-
-
QYTPSFG2608Z
WR5
FFC WIRE ADV JOG-MAIN
-
-
-
-
-
-
QUQ212-0414CG
501F
501G
501E
501D
501C
501B
501A
501
501H
[HR-V705EK]
535
[HR-V705EK]
BOTTOM SIDE
TOP SIDE
536
[HR-V705EK]
WR5
[HR-V705EK]
ADV.JOG
BOARD ASSY<39>
[HR-V705EK]
536
[HR-V705EK]
CN7003
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
30
ARM BASE
LP31020-004B
-
-
----
31
TAP SCREW
QYTDST2606Z
-
-
----
48
S-SWITCH
LP40930-002E
-
-
----
85
CAPSTAN MOTOR
QAR0224-002
QAR0204-002
90
IDLER GEAR 2
LP40829-001B
LP40829-002A
WR1
E-CARD WIRE
WJT0059-001D
WJT0059-001E
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
PW1
MAIN BOARD ASSY
LPA10189-02C
LPA10189-01C
LPA10189-05C
LPA10189-03C
LPA10189-04C
REF NO. ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
PW1
ADV JOG BOARD ASSY
-
-
-
-
-
-
LPA10191-03A
R7047
C RESISTOR
-
-
-
-
-
-
QRE141J-472Y
CN7004 CONNECTOR
-
-
-
-
-
-
QGF1209F1-04
S7030
TACT SWITCH
-
-
-
-
-
-
QSW0456-002Z
UN7001 ROTARY ENCODER
-
-
-
-
-
-
QSW0938-001
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
PW1
SECAM BOARD ASSY
-
-
-
LPA10011-03A
-
-
-
REF NO.
ITEM
HR-S5960EX
HR-V600EX
HR-V601EX
HR-V605EF
HR-V605EK
HR-V606EK
HR-V705EK
PW1
SAT CTL BOARD ASSY
-
LPA10189-01A4
R 7167 MG RESISTOR
-
NRSA02J-0R0X
CN7106 PARA RIBON WIRE
-
QUM022-18A4A4
J 7108 MINI JACK, SAT CTL
-
PU60612
1-4 (No.82956)
SECTION 3
ADJUSTMENT
The difference point(s) compared with the reference model are
as follows.
DELETE
3.3.2 Video circuit
3.3.2.1
EE Y/PB Y (S-VHS/VHS) LEVEL
3.3.4 PAL/SECAM converter circuit [EF model]
3.3.4.1
Colour difference level
3.3.4.2
SECAM burst position
Adjustment procedure and value are changed.
3.3.1 Servo circuit
3.3.1.1
Switching point
(1) Play back the signal (A1) of the alignment tape (A2).
(2) Apply the external trigger signal to D.FF (E) to observe the
VIDEO OUT waveform and V.PB FM waveform at the mea-
suring points (D1) and (D2).
(3) Set the VCR to the manual tracking mode.
(4) Adjust tracking so that the V.PB FM waveform becomes
maximum.
(5) Set the VCR to the Auto adjust mode by transmitting the
code (F) from the Jig RCU. When the VCR enters the stop
mode, the adjustment is completed.
(6) If the VCR enters the eject mode, repeat steps (1) to (5)
again.
(7) Play back the alignment tape (A2) again, confirm that the
switching point is the specified value (G).
Fig.3-3-1a Switching point
Signal
(A1)
(A2)
· Stairstep signal
· Alignment tape(LP,stairstep,PAL) [MHPE-L]
Mode
(B)
· PB
Equipment
(C) · Oscilloscope
Measuring point (D1)
(D2)
· VIDEO OUT terminal (75 ohm terminated)
· TP106 (PB. FM)
External trigger (E)
· TP111 (D.FF)
Adjustment part (F)
· Jig RCU: Code "5A"
Specified value (G) · 6.5 ± 0.5H
Adjustment tool (H) · Jig RCU [PTU94023B]
V.sync
Trigger point
Switching point
V. rate
(No.82956)
AV & MULTIMEDIA COMPANY VIDEO RECORDER CATEGORY 12, 3-chome, Moriya-cho, kanagawa-ku, Yokohama, kanagawa-prefecture, 221-8528, Japan
VICTOR COMPANY OF JAPAN, LIMITED
200305WPC
Printed in Japan