JVC HR-S7300U - Owner's Manual Immediate Download

HR-S7300U

VIDEO CASSETTE RECORDER

INSTRUCTIONS

PU30425-1827

For Customer Use:

Enter below the Serial No. which is

located on the rear of cabinet. Retain

this information for future reference.

Model No.

HR-S7300U

Serial No.

Channel

Changer

Cable

REW

JOG

SHUTTLE

POWER

CH/SET

A.DUB

PAUSE

REC

STOP/EJECT

PLAY

INSERT

SELECT

I T R

TIMER

VIDEO

REC

SAP

PAUSE

PLAY

S-VHS

DYNAMIC

CONTRAST

POWER

TV/

VIDEO

VOL.

VCR

CABLE

TIMER

SKIP SEARCH

BACK

LIGHT

PLAY

STOP

DISPLAY

JOG/SHUTTLE

MBR

ILLUMINATED

MULTI BRAND REMOTE

REMOTE CONTROL UNIT

ENGLISH

Dear Customer,

Thank you for purchasing the JVC VHS video cassette recorder. Before use, please read the safety information and precautions

contained in the following pages to ensure safe use of your new VCR.

CAUTIONS

WARNING:

TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS

UNIT TO RAIN OR MOISTURE.

CAUTION:

This video cassette recorder should be used with AC

120V`, 60Hz only.

To prevent electric shocks and fire hazards, DO NOT use

any other power source.

CAUTION:

TO PREVENT ELECTRIC SHOCK, MATCH WIDE

BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE

LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE

CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral

triangle, is intended to alert the user to the presence of

uninsulated "dangerous voltage" within the product's enclosure

that may be of sufficient magnitude to constitute a risk of electric

shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance

(servicing)

instructions

the

literature

accompanying the appliance.

Failure to heed the following precautions may result in

damage to the VCR, remote control or video cassette.

1. DO NOT place the VCR . . .

... in an environment prone to extreme temperatures or

humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are

generated.

... on a surface that is unstable or subject to vibration.

2. DO NOT block the VCR's ventilation openings.

3. DO NOT place heavy objects on the VCR or remote control.

4. DO NOT place anything which might spill on top of the

VCR or remote control.

5. AVOID violent shocks to the VCR during transport.

**MOISTURE CONDENSATION

Moisture in the air will condense on the VCR when you move it

from a cold place to a warm place, or under extremely humid

conditions--just as water droplets form on the surface of a glass

filled with cold liquid. Moisture condensation on the head drum

will cause damage to the tape. In conditions where condensa-

tion may occur, keep the VCR's power turned on for a few

hours to let the moisture dry before inserting a tape.

**ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads

may cause the playback picture to become blurred or inter-

rupted. Be sure to contact your nearest JVC dealer if such

troubles occur.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer's attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the

grounding system of the building, as close to the point of

cable entry as practical.

Cassettes marked "S-VHS" and "VHS" can be used with this

video cassette recorder. However, S-VHS recordings are

possible only with cassettes marked "S-VHS".

CAUTION:

Changes or modifications not approved by JVC could void

user's authority to operate the equipment.

VCR Plus+C3 and PlusCode are trademarks of Gemstar

Development Corporation.

The VCR Plus+C3 system is manufactured under licence from

Gemstar Development Corporation.

DSSTM is an official trademark of DIRECTV, Inc., a unit of GM

Hughes Electronics.

IMPORTANT PRODUCT

SAFETY INSTRUCTIONS

Electrical energy can perform many useful functions. But

improper use can result in potential electrical shock or fire

hazards. This product has been engineered and manufactured

to assure your personal safety. In order not to defeat the built-in

safeguards, observe the following basic rules for its installation,

use and servicing.

ATTENTION:

Follow and obey all warnings and instructions marked on your

product and its operating instructions. For your safety, please

read all the safety and operating instructions before you operate

this product and keep this booklet for future reference.

INSTALLATION

1. Grounding or Polarization

(A) Your product may be equipped with a polarized alternating-

current line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only one way.

This is a safety feature.

If you are unable to insert the plug fully into the outlet, try

reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the polarized plug.

(B) Your product may be equipped with a 3-wire grounding-type

plug, a plug having a third (grounding) pin. This plug will

only fit into a grounding-type power outlet. This is a safety

feature.

If you are unable to insert the plug into the outlet, contact

your electrician to replace your obsolete outlet. Do not

defeat the safety purpose of the grounding-type plug.

2. Power Sources

Operate your product only from the type of power source

indicated on the marking label. If you are not sure of the type of

power supply to your home, consult your product dealer or

local power company. If your product is intended to operate

from battery power, or other sources, refer to the operating

instructions.

3. Overloading

Do not overload wall outlets, extension cords, or integral

convenience receptacles as this can result in a risk of fire or

electric shock.

4. Power Cord Protection

Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against

them, paying particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the product.

5. Ventilation

Slots and openings in the cabinet are provided for ventilation.

To ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked or

covered.

· Do not block the openings by placing the product on a bed,

sofa, rug or other similar surface.

· Do not place the product in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or the

manufacturer's instructions have been adhered to.

6. Wall or Ceiling Mounting

The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

ANTENNA

LEAD IN WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION

810-20)

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC NATIONAL ELECTRICAL CODE

ELECTRIC SERVICE

EQUIPMENT

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

GROUND CLAMP

ANTENNA INSTALLATION

INSTRUCTIONS

1. Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the

product, be sure the antenna or cable system is grounded so as

to provide some protection against voltage surges and built-up

static charges. Article 810 of the National Electrical Code,

ANSI/NFPA 70, provides information with regard to proper

grounding of the mast and supporting structure, grounding of

the lead-in wire to an antenna discharge unit, size of grounding

connectors, location of antenna discharge unit, connection to

grounding electrodes, and requirements for the grounding

electrode.

2. Lightning

For added protection for this product during a lightning storm,

or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna

or cable system. This will prevent damage to the product due to

lightning and power-line surges.

3. Power Lines

An outside antenna system should not be located in the vicinity

of overhead power lines or other electric light or power circuits,

or where it can fall into such power lines or circuits. When

installing an outside antenna system, extreme care should be

taken to keep from touching such power lines or circuits as

contact with them might be fatal.

SERVICING

1. Servicing

If your product is not operating correctly or exhibits a marked

change in performance and you are unable to restore normal

operation by following the detailed procedure in its operating

instructions, do not attempt to service it yourself as opening or

removing covers may expose you to dangerous voltage or other

hazards. Refer all servicing to qualified service personnel.

2. Damage Requiring Service

Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a.When the power supply cord or plug is damaged.

b.If liquid has been spilled, or objects have fallen into the

product.

c.If the product has been exposed to rain or water.

d.If the product does not operate normally by following the

operating instructions. Adjust only those controls that are

covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to its normal operation.

e.If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in

performance--this indicates a need for service.

3. Replacement Parts

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer or have the same characteristics as the original

part. Unauthorized substitutions may result in fire, electric

shock or other hazards.

4. Safety Check

Upon completion of any service or repairs to this product, ask

the service technician to perform safety checks to determine

that the product is in safe operating condition.

HOW TO USE THIS INSTRUCTION

MANUAL

All major sections and subsections are listed in the Table Of

Contents on page 5. Use this when searching for information

on a specific procedure or feature.

The Index on pages 6365 lists frequently-used terms, and

the number of the first page on which they are used or

explained in the manual. This section also illustrates the

controls and connections on the front and rear panel, the

front display panel and the remote control.

The

mark signals a reference to another page for

instructions or related information.

Operation buttons necessary for the various procedures are

clearly indicated through the use of illustrations at the

beginning of each major section.

BEFORE YOU INSTALL YOUR NEW

VCR . . .

. . . please read the sections/literature listed below.

"Cautions" on page 2

"Important Products Safety Instructions" on the previous pages

USE

1. Accessories

To avoid personal injury:

· Do not place this product on an unstable cart, stand, tripod,

bracket, or table. It may fall, causing serious injury to a child

or adult, and serious damage to the product.

· Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer or sold with the product.

· Use a mounting accessory recommended by the

manufacturer and follow the manufacturer's instructions for

any mounting of the product.

· Do not try to roll a cart with small casters across thresholds or

deep-pile carpets.

2. Product and Cart Combination

A product and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the product and

cart combination to overturn.

3. Water and Moisture

Do not use this product near water--for example, near a bath

tub, wash bowl, kitchen sink or laundry tub, in a wet basement,

or near a swimming pool and the like.

4. Object and Liquid Entry

Never push objects of any kind into this product through

openings as they may touch dangerous voltage points or short-

out parts that could result in a fire or electric shock. Never spill

liquid of any kind on the product.

5. Attachments

Do not use attachments not recommended by the manufacturer

of this product as they may cause hazards.

6. Cleaning

Unplug this product from the wall outlet before cleaning. Do

not use liquid cleaners or aerosol cleaners. Use a damp cloth

for cleaning.

7. Heat

The product should be situated away from heat sources such as

radiators, heat registers, stoves, or other products (including

amplifiers) that produce heat.

PORTABLE CART WARNING

(Symbol provided by RETAC)

CONTENTS

TIMER RECORDING

Instant Timer Recording (ITR) ............... 39

VCR Plus+ Timer Programming ............ 40

On-Screen Timer Programming ........... 42

Check And Cancel Programs .......................... 44

Auto Timer ......................................................45

EDITING

Edit From A Camcorder ....................... 46

Edit To Or From Another VCR ............... 48

Assemble Editing ................................. 49

Insert Editing ....................................... 50

Random Assemble Editing ................... 52

Audio Dubbing ....................................54

SPECIAL FEATURES

TV Multi-Brand Remote Control ..................... 55

Cable Box Multi-Brand Remote Control.......... 56

DSS Receiver Multi-Brand Remote Control ..... 57

Control Two JVC VCRs ................................... 57

TROUBLESHOOTING

Power ................................................. 58

Tape Transport ..................................... 58

Playback ............................................. 58

Recording ............................................ 59

Timer Recording ................................... 59

Other Problems.................................... 60

QUESTIONS AND ANSWERS 61

Playback ............................................. 61

Recording ............................................ 61

Timer Recording ................................... 61

SPECIFICATIONS

INDEX

List Of Terms ........................................ 63

Front View ........................................... 64

Rear View ........................................... 64

Front Display Panel .............................. 65

Remote Control ....................................65

FOR SERVICING

WARRANTY

INSTALLING YOUR NEW VCR

Connections ...........................................6

Basic Connections ............................................ 6

S-VIDEO Connection ....................................... 7

INITIAL SETTINGS

Clock ..................................................... 8

Advanced Auto Clock Set ................................. 8

Clock Setting ..................................................... 9

Preparation ....................................................... 9

Semi-Auto ....................................................... 10

Manual ........................................................... 11

Auto ................................................................ 11

Language ............................................ 12

Tuner ................................................... 13

Set Receivable Channels ................................ 13

Add Or Delete A Channel .............................. 15

Cable Box Control ................................ 16

Situate And Connect Controller ...................... 16

Set Cable Box Output Channel ....................... 17

Set Cable Box Brand ....................................... 18

VCR Plus+ Setup .................................. 20

SIMPLE PLAYBACK AND

RECORDING

Simple Playback .................................. 23

Simple Recording ................................. 24

PLAYBACK AND RECORDING

FEATURES

Playback ............................................. 25

Still Picture/Frame-By-Frame Playback ........... 25

Slow Motion/Reverse Slow Motion ................. 25

Variable-Speed Search/Reverse Motion

Playback ......................................................... 26

High-Speed Search ......................................... 26

Manual Tracking............................................. 27

Skip Search ..................................................... 27

Repeat Playback ............................................. 27

Dynamic Contrast .......................................... 28

Video Stabilizer ...............................................28

Select The Soundtrack .................................... 29

Superimpose ................................................... 30

Index Search ................................................... 31

Manual Index Mark/Erase ............................... 31

Instant ReView ................................................ 32

Counter Reset ..................................................32

Counter Memory ............................................ 32

Next-Function Memory .................................. 33

AV COMPU LINK Playback ............................ 33

Recording ............................................35

Record One Program While

Watching Another .......................................... 35

Display Elapsed Recording Time ..................... 35

S-VHS (Super VHS) and VHS .......................... 35

Stereo And SAP (Second Audio Program) ........ 36

To Record SAP Programs ................................ 36

Hi-Fi Audio Recording Level Control .............. 37

Display Tape Remaining Time ........................ 38