JVC HD-52G587 - Owner's Manual Immediate Download

Important Note:

In the spaces below, enter the model and serial number of your monitor (located

at the rear of the monitor cabinet). Staple your sales receipt or invoice to the

inside cover of this guide. Keep this user's guide in a convenient place for future

reference. Keep the carton and original packaging for future use.

LCT2065-001A-A

0306TNH-II-IM

Model Number:

Serial Number:

Illustration of HD-52G587 and RM-C1273G

For Models:

HD-52G587

HD-61G587

Projection Monitor Users Guide

LCT2065-001A-A ENG.indd 1

3/31/06 9:19:02 AM

Important Safety Precautions

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

CAUTION: TO INSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES

REGARDING THE USE OF THIS UNIT.

1. Operate only from the power source specified on the unit.

2. Avoid damaging the AC plug and power cord.

3. Avoid Improper installation and never position the unit where good ventilation is unattainable.

4. Do not allow objects or liquid into the cabinet openings.

5. In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair

it yourself or remove the rear cover.

Changes or modifications not approved by JVC could void the warranty.

* When you don't use this monitor set for a long period of time, be sure to disconnect both the

power plug from the AC outlet and antenna for your safety.

* To prevent electric shock do not use this polarized plug with an extension cord, receptacle or

other outlet unless the blades can be fully inserted to prevent blade exposure.

CAUTION: To reduce the risk of electric shock. Do not

remove cover (or back). No user serviceable

parts inside. Refer servicing to qualified service

personnel.

The lightning flash with arrowhead symbol, within an

equilateral triangle is intended to alert the user to the

presence of uninsulated "dangerous voltage" within the

product's enclosure that may be of sufficient magnitude

to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

NOTICE (for USA)

This product has a High Intensity Discharge (HID) lamp that

contains a small amount of mercury. It also contains lead in some

components. Disposal of these materials may be regulated in your

community due to environmental considerations. For disposal or

recycling information, please contact your local authorities, or the

Electronics Industries Alliance: http://www.eiae.org

LCT2065-001A-A ENG.indd 2

3/31/06 9:19:09 AM

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has

two blades with one wider than the other. A grounding type plug has two blades and a third

grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

IMPORTANT SAFETY INSTRUCTIONS

· As an "ENERGY STAR®" partner,

JVC has determined that this

product or product model meets the

"ENERGY STAR®" guidelines for energy

efficiency.

LCT2065-001A-A ENG.indd 3

3/31/06 9:19:10 AM

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as

vases, shall be placed on the apparatus.

16) Avoid improper installation and never position the unit where good ventilation is impossible. When

installing this monitor, distance recommendations must be maintained between the set and the

wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance

guidelines shown for safe operation.

17) Cautions for installation

-- Do not tilt the monitor towards the left or right, or towards the back.

-- Install the monitor in a corner on the floor so as to keep cords out of the way.

-- The monitor will generate a slight amount of heat during operation. Ensure that sufficient

space is available around the monitor to allow satisfactory cooling.

18) Make enough room for inserting and removing the power plug. Place the monitor as close to the

outlet as possible. The main power supply for this monitor is controlled by inserting or removing

the power plug.

150 mm

200 mm

150 mm

200 mm

50 mm

LAMP

POWER

VOLUME

INPUT-4

OPERATE

VIDEO

L/MONO

AUDIO

INPUT

FCC Notice:

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or monitor

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/monitor technician for help.

LCT2065-001A-A ENG.indd 4

3/31/06 9:19:10 AM

Warnings

Caring for the Cabinet

Caring for the Screen

Normally, light dusting with a soft, non-scratching duster will keep your monitor clean.

If you wish to wipe down the monitor, first unplug it. Then wipe gently with a soft cloth, slightly

moistened with water. You can add a few drops of mild liquid detergent to the water to help

remove spots of oily dirt.

· DO NOT allow liquid to enter the monitor through the ventilation slots.

· DO NOT use strong or abrasive cleaners on the monitor.

· DO NOT spray liquids or cleaners directly on the monitor's surface.

· DO NOT rub or scrub the monitor harshly. Wipe the set gently with a soft cloth.

The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a

soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner

and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.

Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.

These will remove the coating layer and cause discolorations.

Do not push or hit the screen. This could cause scratches on the screen surface and image

distortions.

LCT2065-001A-A ENG.indd 5

3/31/06 9:19:10 AM