GV-DS2
JLIP VIDEO CAPTURE DOCKING STATION
LYT0002-0T7A
INSTRUCTIONS
ENGLISH
EN
2 EN
Dear Customer,
Thank you for purchasing this VIDEO CAPTURE DOCKING STATION. Before use, please read the
safety information and precautions contained in the following pages to ensure safe use of this product.
SAFETY PRECAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR
MOISTURE.
Using This Instruction Manual
·All major sections and subsections are listed in the Table Of Contents (
pg. 5 7).
·Notes appear after most subsections. Be sure to read these as well.
·Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . .
..... refer to "Controls and Connectors" (
pg. 10) and familiarize yourself with connector locations
before use.
..... read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely
important information regarding the safe use of your new VIDEO CAPTURE DOCKING STATION.
CAUTION:
To prevent shock, do not open the cabinet.
No user serviceable parts inside. Refer
servicing to qualified personnel.
NOTE:
The rating plate (serial number plate) and
safety caution are on the bottom of the
VIDEO CAPTURE DOCKING STATION.
This unit is produced to comply with Standard
IEC Publ. 65.
When using the Video Capture Docking
Station, use the AA-V90EG or AA-V90EK AC
Adapter/Charger (optional or provided with the
camcorder).
Connection to the mains supply in the United
Kingdom.
DO NOT cut off the mains plug from this equipment.
If the plug fitted is not suitable for the power
points in your home or the cable is too short to
reach a power point, then obtain an appropriate
safety approved extension lead or consult your
dealer.
BE SURE to replace the fuse only with an
identical approved type, as originally fitted,
and to replace the fuse cover.
If nontheless the mains plug is cut off ensure to
remove the fuse and dispose of the plug
immediately, to avoid a possible shock hazard
by inadvertent connection to the mains supply.
If this product is not supplied fitted with a mains
plug then follow the instructions given below:
DO NOT make any connection to the Larger
Terminal coded E or Green.
The wires in the mains lead are coloured in
accordance with the following code:
Blue to N (Neutral) or Black
Brown to L (Live) or Red
If these colours do not correspond with the
terminal identifications of your plug, connect as
follows:
Blue wire to terminal coded N (Neutral) or
coloured black.
Brown wire to terminal coded L (Live) or
coloured Red.
If in doubt -- consult a competent electrician.
IMPORTANT
EN
3
CAUTIONS
SOME DO'S AND DON'TS ON THE SAFE
USE OF EQUIPMENT
This equipment has been designed and manufactured to meet international safety standards
but, like any electrical equipment, care must be taken if you are to obtain the best results and
safety is to be assured.
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnec-
tions between pieces of equipment) are properly made and in accordance with the manufacturer's
instructions. Switch off and withdraw the mains plug when making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your
equipment.
DO be careful with glass panels or doors on equipment.
DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is
damanged in any way -- switch off, withdraw the mains plug and consult your dealer.
DON'T remove any fixed cover as this may expose dangerous voltages.
DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed
for unattended operation or has a standby mode. Switch off using the switch on the equipment and
make sure that your family knows how to do this. Special arrangements may need to be made for
infirm or handicapped people.
DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements of
road safety. It is illegal to watch television whilst driving.
DON'T listen to headphones at high volume, as such use can permanently damage your hearing.
DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheating
will cause damage and shorten the life of the equipment.
DON'T use makeshift stands and NEVER fix legs with wood screws -- to ensure complete safety always fit
the manufacturer's approved stand or legs with the fixings provided according to the instructions.
DON'T allow electrical equipment to be exposed to rain or moisture.
ABOVE ALL
-- NEVER let anyone especially children push anything into holes, slots or any other opening in the case --
this could result in a fatal electrical shock;
-- NEVER guess or take chances with electrical equipment of any kind -- it is better to be safe than sorry!
DO NOT attempt to insert foreign objects into the connectors, as this can lead to
electric shock or fire. If an object is accidentally inserted, unplug it and contact your
JVC dealer. Be especially careful with children.
If during use you notice that the VIDEO CAPTURE DOCKING STATION is damaged,
unplug it and contact your JVC dealer. Use of the VIDEO CAPTURE DOCKING STATION
under these conditions can lead to fire or electric shock.
DO NOT attempt to repair or modify the VIDEO CAPTURE DOCKING STATION. Doing
so may result in malfunctions or injury. If a problem occurs, contact your JVC dealer.
4 EN
CAUTIONS (cont.)
Failure to heed the following precautions may result in damage to the VIDEO
CAPTURE DOCKING STATION.
1. DO NOT place the VIDEO CAPTURE DOCKING STATION . . .
.... in an environment prone to extreme temperatures or humidity.
.... in direct sunlight.
.... in a dusty environment.
.... in an environment where strong magnetic fields are generated.
.... on a surface that is unstable or subject to vibration. The unit may fall, causing injury.
2. DO NOT place heavy objects on the VIDEO CAPTURE DOCKING STATION.
3. DO NOT place anything which might spill on top of the VIDEO CAPTURE DOCKING
STATION.
4. AVOID violent shocks to the VIDEO CAPTURE DOCKING STATION during transport.
5. DO NOT leave the VIDEO CAPTURE DOCKING STATION plugged in when the unit is not
in use.
6. DO NOT use accessories other than those designated in the instructions. Use of others can
lead to fire or electric shock.
7. DO NOT connect devices to the VIDEO CAPTURE DOCKING STATION other than those
designated in the instructions. Use of others can lead to malfunctions.
How to handle a CD-ROM
Take care not to soil or scratch the mirror surface (opposite to the printed surface). Do not
write anything or put a sticker on either the front or back surface. If the CD-ROM gets dirty,
gently wipe it with a soft cloth outward from the centre hole using a circular motion.
Do not use conventional disc cleaners or cleaning spray.
Do not bend the CD-ROM or touch its mirror surface.
Do not store your CD-ROM in a dusty, hot or humid environment. Keep it away from direct
sunlight.
MAINTENANCE
If the inside of the VIDEO CAPTURE DOCKING STATION is left dusty for a long time, its use
can lead to fire or malfunction. Consult your JVC dealer on cleaning.
CAUTION:
Changes or modifications not approved by JVC could void user's authority to operate the
equipment.
The Readme.TXT file provides additional information for setup and information that is not
included in the instruction manual. Please read the file before installing the provided
software program.
You can find the latest information (in English) on the provided software program at our
www server.
<www>http://www.jvc-victor.co.jp/
EN
5
CONTENTS
MAJOR FEATURES
8
CONTROLS AND CONNECTORS
10
CAMCORDER ATTACHMENT
11
CONNECTIONS
12
JLIP VIDEO CAPTURE SOFTWARE SECTION
.......
15
GETTING STARTED
16
INSTALLATION (JLIP Video Capture Software)
17
OPEN & CLOSE (Basic Operation Procedure)
18
Preparation ....................................................................... 18
How to close the program ...................................................... 19
INITIALIZATION
20
Initializing JLIP .................................................................. 20
Select units ........................................................................ 21
HOW THE DESKTOP WORKS
22
Main desktop window ........................................................... 22
Menu bar .......................................................................... 24
Each pulldown menu is configured as follows ................................ 24
VIDEO CAPTURE
26
Capturing video images ......................................................... 26
Step by step capture ............................................................. 27
Automatic capture ................................................................ 28
Program capture ................................................................. 28
Interval capture .................................................................. 30
SAVE PICTURE
31
Saving ............................................................................. 31
Save the full image data ........................................................ 31
PICTURE FORMAT SETTING
32
Selecting a picture format ....................................................... 32