DLA-QX1G
INSTRUCTIONS
SUPER PROJECTOR
MANUEL D'INSTRUCTIONS : SUPER PROJECTEUR
LOCK
UNLOCK
HIDE
EXIT
ZOOM
KEYSTONE
SHUTTER
DIGITAL
ZOOM
SHIFT
FOCUS
VIC 1
VIC 2
VIC 3
MENU
ENTER
OPERATE
BACK
LIGHT
T
W
T
W
ON
OFF
RM-MQX1G REMOTE CONTROL UNIT
(Lenses are not supplied.)
LCT0963-002A
For Customer Use:
Enter below the Serial No. which is located
on the side panel of the cabinet. Retain this
information for future reference.
Pour l'utilisateur:
Inscrivez ci-dessous le No de série situé sur
le panneau latéral du coffret de l'appareil.
Conservez cette information à titre
d'information.
Model No.
No de modèle
DLA-QX1G
Serial No.
No de série
ENGLISH
FRAN
Ç
AIS
QX1Cover_f.pm6
02.3.7, 13:39
3
QX1G_Subcover_EN
02.3.7, 13:39
2
SUPER PROJECTOR
DLA-QX1G
INSTRUCTIONS
ENGLISH
QX1G_Subcover_EN
02.3.7, 13:39
3
2
Thank you for purchasing this projector. Before using it, read and follow all instructions carefully to take full
advantage of the projector's capabilities.
SAFETY PRECAUTIONS
WARNING :
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION :
To reduce the risk of electric shock, do not remove cover. Refer servicing to
qualified service personnel.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modification not approved by JVC could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own
expense.
IMPORTANT INFORMATION
About the plug (U.S.A. only)
This projector is equipped with a 3-blade grounding-type plug to satisfy FCC
rule. If you are unable to insert the plug into the outlet, contact your dealer.
About burning-in of the D-ILA device
Do not allow the same still picture to be projected for a long time or an abnormally
bright video picture to be projected.
Do not project video images with high-intensity or high-contrast on a screen. The
video image could be burned in to the D-ILA device.
Use special care when projecting video games or computer program images. There
is no problem with ordinary video-cassette playback images.
MACHINE NOISE INFORMATION
(Germany only)
Changes Machine Noise Information Ordinance 3. GSGV, January 18,
1991: The sound pressure level at the operator position is equal or less
than 70 dB(A) according to ISO 7779.
WARNING :
THIS APPARATUS MUST BE EARTHED.
EN02-06QX1G_f.pm6
02.3.7, 13:36
2
3
ENGLISH
SAFETY PRECAUTIONS (Cont.)
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your
personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In
order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation,
use and service. Please read these "IMPORTANT SAFEGUARDS" carefully before use.
All the safety and operating instructions should be read before the product is operated.
The safety and operating instructions should be retained for future reference.
All warnings on the product and in the operating instructions should be adhered to.
All operating instructions should be followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
Do not use attachments not recommended by the product manufacturer as they may be hazardous.
Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this
causes condensation, which may result in fire, electric shock, or other hazards.
Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or an adult,
and serious damage to the product. The product should be mounted according to the manufacturer's instructions, and should
use a mount recommended by the manufacturer.
When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven
surfaces which may cause the product and cart to overturn, damaging equipment or causing possible injury to
the operator.
Unplug this product from the wall outlet and refer service to qualified service personnel under the following
conditions:
a) When the power supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen on the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the Operation Manual, as an improper adjustment of controls may result in damage and will often require extensive
work by a qualified technician to restore the product to normal operation.
e) If the product has been dropped or damaged in any way.
f ) When the product exhibits a distinct change in performance--this indicates a need for service.
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer
or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other
products (including amplifiers) that produce heat.
When connecting other products such as VCR's, and personal computers, you should turn off the power of this product for
protection against electric shock.
Do not place combustibles behind the cooling fan. For example, cloth, paper, matches, aerosol cans or gas lighters that
present special hazards when overheated.
Do not look into the projection lens while the illumination lamp is turned on. Exposure of your eyes to the strong light can result
in impaired eyesight.
EN02-06QX1G_f.pm6
02.3.7, 13:36
3