MICRO COMPONENT SYSTEM
UX-G70
--Consists of CA-UXG70 and SP-UXG70
INSTRUCTIONS
GVT0181-001B
[J,C]
SUPER VIDEO
For Customer Use:
Enter below the Model No. and Serial No.
which are located either on the rear, bot-
tom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
Cover[J].fm Page 1 Friday, March 17, 2006 10:36 AM
G-1
Warnings, Cautions and Others
Mises en garde, précautions et indications diverses
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
ATTENTION
Afin d'éviter tout risque d'électrocution, d'incendie, etc.:
1. Ne pas enlever les vis ni les panneaux et ne pas ouvrir le coffret
de l'appareil.
2. Ne pas exposer l'appareil à la pluie ni à l'humidité.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the unit; leave all servicing to qualified
service personnel.
3. CAUTION: Visible and/or invisible class 1 M laser radiation when
open. Do not view directly with optical instruments.
IMPORTANT POUR PRODUIT LASER
1. PRODUIT LASER CLASSE 1
2. ATTENTION: N'ouvrez pas le couvercle supérieur. Il n'y a
aucune pièce réparable par l'utilisateur à l'intérieur de l'appareil;
confiez toute réparation à un personnel qualifié.
3. ATTENTION: Rayonnement laser visible et/ou invisible de
classe 1 M une fois ouvert. Ne pas regarder directement avec
des instruments optiques.
CAUTION --
(standby) button!
Disconnect the mains plug to shut the power off completely.
When installing the apparatus, ensure that the plug is easily
accessible. The
button in any position does not disconnect
the mains line.
· When the unit is on standby, the STANDBY lamp lights in red.
· When the unit is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
Attention Commutateur
(attente)!
Déconnecter la fiche de secteur pour couper complètement le
courant. Le commutateur
ne coupe jamais complètement
la ligne de secteur, quelle que soit sa position.
· Quand l'appareil est en mode d'attente, le témoin STANDBY est
allume en rouge.
· Quand l'appareil est sous tension, le témoin STANDBY s'éteint.
Le courant peut être télécommandé.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to section 820-40 of the NEC which provides
guidelines for proper grounding and, in particular, specifies
that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as
practical.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol,
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure
that
may
be
of
sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence
of
important
operating
and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
[European Union only]
[Union européenne seulement]
For U.S.A.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Changes or modifications not approved by JVC could void the
user's authority to operate the equipment.
ATTENTION
Des changements ou modifications non approuvés par JVC
pourront invalider l'autorité de l'utilisateur à opérer cet
appareil.
Declaration of Conformity:
Trade Name: JVC
Model Number: UX-G70
Responsible Party: JVC American Corp.
Address: 1700 Valley Road, Wayne New Jersey 07470
Telephone Number: 973-317-5000
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
For Canada/pour le Canada
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS
B LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL
APPARATUS AS SET OUT IN THE INTERFERENCE-CAUSING
EQUIPMENT STANDARD ENTITLED "DIGITAL APPARATUS,"
ICES-003 OF THE DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUMERIQUE RESPECTE LES LIMITES DE
BRUITS RADIOELECTRIQUES APPLICABLES AUX
APPAREILS NUMIRIQUES DE CLASSE B PRESCRITES DANS
LA NORME SUR LE MATERIEL BROUILLEUR; "APPAREILS
NUMERIQUES", NMB-003 EDICTEE PAR LE MINISTRE DES
COMMUNICATIONS.
Safty[J].fm Page 1 Friday, March 17, 2006 10:36 AM
1
Precautions
Installation
· Install the System in a location with adequate ventilation to
prevent internal heat buildup in the System.
· Install in a place which is level, dry and neither too hot nor
too cold--between 5°C and 35°C (41°F and 95°F).
· Leave sufficient distance between the System and the TV.
· Keep the speakers away from the TV to avoid interference
with the TV.
Power sources
· When unplugging the System from the wall outlet, always
pull on the plug, not the AC power cord.
Moisture condensation
Moisture may condense on the lenses inside the System in
the following cases:
· After starting to heat the room
· In a damp room
· If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, then plug it in again.
Internal heat
· Make sure there is good ventilation around the unit. Poor
ventilation could overheat and damage the unit.
Others
· Should any metallic object or liquid fall into the System,
unplug the AC power cord and consult your dealer before
operating any further.
· If you are not going to operate the System for an extended
period of time, unplug the AC power cord from the wall
outlet.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Contents
Connections ..............................................................3
Display Indicators ....................................................6
Daily Operations--Playback ..................................7
Daily Operations--Sound & Other Adjustments
.....12
Adjusting the Volume ....................................................... 12
Adjusting the Sound.......................................................... 12
Creating 3-dimentional Sound Field--3D Phonic ............ 13
Presetting Automatic DVD Video Sound Increase Level ......13
Adjusting the Audio Input Level ...................................... 13
Adjusting the Audio Output Level.................................... 13
Changing the Display Brightness...................................... 14
Changing the Scanning Mode ........................................... 14
Changing the Picture Tone................................................ 14
Setting the Clock ............................................................... 15
Turning Off the Power Automatically .............................. 15
Unique DVD/VCD Operations .............................16
Selecting the Audio Track................................................. 16
Selecting the Subtitle Language........................................ 17
Selecting the View Angle ................................................. 17
Selecting the Browsable Still Pictures .............................. 17
Playing Back Bonus Group............................................... 17
Making Dialogues Clear--Clear Voice ............................ 18
Special Effect Playback .................................................... 18
Advanced Disc Operations....................................19
Programming the Playing Order--Program Play ............. 19
Playing at Random--Random Play .................................. 20
Playing Repeatedly ........................................................... 21
Prohibiting Disc Ejection--Child Lock ............................ 21
On-screen Disc Operations ............................................... 22
Operations on the Control Screen ..................................... 26
Timer Operations...................................................28
Setup Menu Operations ........................................30
Additional Information .........................................32
Learning More about This System.................................... 32
Troubleshooting ................................................................ 35
Operating JVC's TVs Using the Remote Control............. 37
Specifications .................................................................... 38
Parts Index ............................................................39
DO NOT install the System in a location near
heat sources, or in a place subject to direct
sunlight, excessive dust or vibration.
DO NOT handle the AC power cord with wet
hands.
DO NOT block the ventilation openings or
holes. If they are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.
DO NOT disassemble the System since there
are no user serviceable parts inside.
Introduction
UX-G70[J].book Page 1 Monday, April 3, 2006 4:46 PM
2
Playable Disc Types
In addition to the above discs, this System can playback
audio data recorded on CD-Extra.
· The following discs cannot be played back:
DVD-RAM, CD-I (CD-I Ready), CD-ROM, Photo CD,
CD-G (CD-Graphics), and DVD/CD Text.
Playing back these discs will generate noise and damage
the speakers.
· In this manual, "file" and "track" are interchangeably used
for MP3/WMA/JPEG operations.
· It is possible to playback finalized +R/+RW (DVD format
only) discs. "DVD" lights on the front display panel when
a +R/+RW disc is loaded.
Note on Region Code
DVD players and DVDs have their own Region Code
numbers. This System can playback only DVDs with Region
Code numbers including "1."
Audio formats
The System can playback the following digital audio
formats.
· LPCM (Linear PCM),
DIGITAL (Dolby Digital),
DTS (Digital Theater Systems), MLP (Meridian Lossless
Packing)
When playing a multi-channel encoded DVDs, the System
properly converts these multi-channel signals into 2
channels, and emits the downmixed sound from the
speakers.
· To enjoy the powerful sound of these multi-channel
encoded DVDs,
connect a proper decoder or an amplifier
with a proper built-in decoder to the DVD OPTICAL
DIGITAL OUT terminal on the rear.
How to Read This Manual
· Button and control operations are explained in the table
below.
· Some related tips and notes are explained later in the
sections "Learning More about This System" and
"Troubleshooting," but not in the same section
explaining the operations (
indicates that the
content has some information).
"DVD Logo" is a trademark of DVD Format/Logo
Licensing Corporation registered in the US, Japan and other
countries.
Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the
use of the Non-DVD side of a DualDisc in this product is not
recommended.
· CD-R/-RW: Recorded in the Audio CD, Video CD and
SVCD formats. MP3, WMA and JPEG files written in
accordance with the "ISO 9660" format can also be
played.
· DVD-R/-RW, +R/+RW: Recorded in the DVD Video
format. MP3, WMA and JPEG files written in the UDF
bridge format can also be played.
· DVD-RW/-ROM: Recorded in the DVD Video
Recording (VR) format.
EX.:
DIGITAL VIDEO
SUPER VIDEO
COMPACT
DIGITAL AUDIO
IMPORTANT: Before playing a disc, make sure of
the following...
· Turn on the TV and select an appropriate input mode on
the TV to view the pictures or on-screen displays.
· For disc playback, you can change the initial setting to
your preference. See "Setup Menu Operations" on
page 30.
If "
" appears on the TV screen when you press a
button, the disc cannot perform the operation you have
tried to do.
Indicates that you press the button briefly.
Indicates that you press the button briefly and
repeatedly until an option you want is
selected.
Indicates that you press one of the buttons.
Indicates that you press and hold the button
for a specified period.
Indicates that you turn the control toward the
specified direction(s).
Indicates that this operation is only possible
using the remote control.
Indicates that this operation is only possible
using the main unit.
INFO
2sec.
Remote
ONLY
Main Unit
ONLY
UX-G70[J].book Page 2 Monday, April 3, 2006 4:46 PM
3
Connections
· Connect VIDEO OUT directly to the video input of your
TV. Connecting VIDEO OUT to a TV via a VCR may
interfere with your viewing when playing back a copy-
protected disc. Connecting VIDEO OUT to an integrated
TV/VCR system may also interfere with your viewing.
Do not connect the AC power cord until all other
connections have been made.
Supplied accessories
Check to be sure that you have all the following items.
· FM antenna (x1)
· AM loop antenna (x1)
· Composite video cord (x1)
· Core filter* (x1)
· Remote control (x1)
· Batteries (x2)
If any item is missing, consult your dealer immediately.
Front panel
Pull down the cover until you hear a clicking sound.
From the portable audio device: See page 5.
From the PC: See page 11.
From the headphones: See page 7.
¤ To a wall outlet
Plug in the AC power cord only after all connections
are complete.
/ From the digital input of digital audio component
See page 5.
~ From the powered subwoofer
See page 4.
! From the input of TV/monitor
See page 4.
Y From AM/FM antenna
See page 4.
@ From the speakers
See page 5.
From the video game: See page 11.
*Attaching the core filter to the USB cable to reduce interference
Wind firmly the USB cable twice.
· Keep close between the plug connected to the
System and the core filter.
· Do not damage the USB cable by applying
excessive force when winding.
Close the core
filter until you
hear a clicking
sound.
Stopper
At the front panel
Rear panel
UX-G70[J].book Page 3 Monday, April 3, 2006 4:46 PM