background image
SERVICE MANUAL
AV-2108TEE
AV-2908TEE
AV-2508TEE
AV-3408TEE
COLOUR TELEVISION
BASIC CHASSIS
CH
No. 51901
Sep. 2001
COPYRIGHT © 2001 VICTOR COMPANY OF JAPAN, LTD.
AV-2108TEE /B AV-2908TEE /B
AV-2508TEE /B AV-3408TEE /B
RM-C355 REMOTE CONTROL UNIT
TEXT
DISPLAY
MENU
POWER
CHANNEL
VOLUME
SYSTEM
COLOUR
REVEAL
HOLD
INDEX
STORE
MODE
SIZE
SUBPAGE
CANCEL
OFF TIMER
TV/VIDEO
PICTURE MODE
CHANNEL SCAN
TV/TEXT
ECO SENSOR
SOUND
MUTING
RETURN
123
456
78
0
9
-/--
RM-C355-1C
Regarding service information other than these sections, refer to the AV-2108TEE service
manual (No. 51849), AV-2508TEE service manual (No. 51848), AV-2908TEE service manual
(No. 51839) and AV-3408TEE service manual (No.51854).
Also, be sure to note important safety precautions provided in the service manual.

background image
2
No. 51901
AV-2108TEE
AV-2908TEE
AV-2508TEE
AV-3408TEE
CONTENTS
a SPECIFIC SERVICE INSTRUCTIONS [AV-2108TEE/B] .........................................................................3
a SERVICE ADJUSTMENTS [AV-2108TEE/B] ..........................................................................................4
a PARTS LIST [AV-2108TEE/B] ................................................................................................................ 9
a SPECIFIC SERVICE INSTRUCTIONS [AV-2508TEE/B] .......................................................................18
a SERVICE ADJUSTMENTS [AV-2508TEE/B] ........................................................................................19
a PARTS LIST [AV-2508TEE/B] ...............................................................................................................24
a SPECIFIC SERVICE INSTRUCTIONS [AV-2908TEE/B] .......................................................................30
a SERVICE ADJUSTMENTS [AV-2908TEE/B] ........................................................................................31
a PATTERN DIAGRAMS [AV-2908TEE/B] ...............................................................................................38
a PARTS LIST [AV-2908TEE/B] ...............................................................................................................40
a SPECIFIC SERVICE INSTRUCTIONS [AV-3408TEE/B] .......................................................................49
a SERVICE ADJUSTMENTS [AV-3408TEE/B] ........................................................................................50
a PATTERN DIAGRAMS [AV-3408TEE/B] ...............................................................................................53
a PARTS LIST [AV-3408TEE/B] ...............................................................................................................54

background image
AV-2108TEE
No. 51901
3
A
V
-2108TEE
Setting item
Setting content
Setting value
MULTI
TRIPLE
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
MU
MA
YES
NO
000
024
000
024
000
024
000
024
000
024
E/R/C
E/R/A/F
E/F
E/A
E/R
E/C
E/A/F
AV-21LS
AV-21LS-AU
AV-21LX
AV-21LH
AV-2108TEE
AV-2108TEE/B
AV-21X-A
SYSTEM
COMB
TILT
TEXT
SUPER BASS
LANGUAGE
MSP
BILINGUAL
B/B SOUND
TUNER
COLOUR AUTO
LOCK 1MHz
500KHz
250KHz
156.25KHz
31.25KHz
MULTI
NO
NO
ARABIC
NO
E/R/C
YES
NO
NO
MU
NO
020(040)
020(040)
020(040)
015(030)
015(030)
PAN EURO
NO
NO
E/C
E/R/A/F
E/R
YES
YES
NO
NO
RUSSIAN
UKRANIAN
020
020
020
015
015
020(040)
020(040)
020(040)
015(030)
015(030)
(040)
(040)
(040)
(030)
(030)
SETTING OF SYSTEM CONSTANT SET
Table 1
SPECIFIC SERVICE INSTRUCTIONS [AV-2108TEE/B]
NOTE : (*** ) is for Micon (IC1701) Part No. TDA9365N13S0518.

background image
AV-2108TEE
4
No. 51901
VC (VIDEO/CHROMA) CIRCUIT ADJUSTMENT
The setting (adjustment) using the remote control unit is made on the basis of the initial setting values.
The setting values which adjust the screen to the optimum condition can be different from the initial setting values.
· Do not change the initial setting values of the setting (adjustment) items not listed in"ADJUSTMENT".
[SUB MENU 2. VC]
: Do not adjust.
Setting (Adjustment) item
Variable range
Initial setting value
PAL
SECAM
NTSC3.58
NTSC4.43
COMPONENT
1
CUTOFF(R/G)
­7 -- +8
0
2
DRIVE(R/G/B)
­30 -- +31
0
3
BRIGHT(COM./TV/V-1/V-2/V-3)
­30 -- +31
0/­18/0/0/0
4
CONT
­30 -- +31
­20
--
5
COLOUR
­30 -- +31
­5
­3
­12
­2
+10
6
TINT (TV/VIDEO)
­30 -- +31
--
--
­15/+4
+1/+1
--
7
SHARP (TV/VIDEO)
­30 -- +31
­16/­2
­/0
8
YDELAY (TV/VIDEO/S)
­8 -- +7
0/+1/0
+5/+1/+1
0/+1/+1
+5/0/+1
--
Item
Measuring
instrument
Test point
Adjustment part
Description
Adjustment
of WHITE
BALANCE
(Low light)
1. CUTOFF (R)
CUTOFF (G)
SCREEN VR
[In HVT]
Note:
· Set PICTURE MODE (VSM) to "BRIGHT".
1. Receive a PAL black and white signal (colour off).
2. Select 2. VC from the SERVICE MENU.
3. Select 1. CUTOFF (R) and (G) with MENU &/^ key, and set each
value to initial setting value with the 4 and 7 keys, or 5 and 8 keys on
the remote control unit.
4. Press the 1 key on the remote control unit to produce a single hori-
zontal line.
5. Turn the SCREEN VR fully counterclockwise, then slowly turn it clock-
wise to where a red, blue or green colour is faintly visible.
6. Use the keys 4 and 7 or 5 and 8 on the remote control unit and
adjust the other 2 colours to where the single horizontal line ap-
pears white.
7. Turn the SCREEN VR to where the single horizontal line glows faintly.
8. Press the 2 key to return to 1. CUTOFF screen.
9. Press the DISPLAY key twice to return to the normal screen.
Setting (Adjustment)
Variable
Initial setting
Item
range
value
1. CUT OFF
R
­7 -- +8
0
G
­7 -- +8
0
PAL
1. CUTOFF
50 Hz
(R)
(G)
**
**
V/C
MENU 89: SELECT
MENU - / + : OPERATE
DISPLAY : EXIT
Signal
generator
Remote
control unit
G. CUTOFF (8)
H.LINE OFF
H.LINE ON
12
3
4
78
9
56
R. CUTOFF (8)
R. CUTOFF (9)
G.CUTOFF (9)
REMOTE CONTROL UNIT
SERVICE ADJUSTMENTS [AV-2108TEE/B]

background image
AV-2108TEE
No. 51901
5
A
V
-2108TEE
Item
Measuring
instrument
Test point
Adjustment part
Description
Adjustment
of
SUB
COLOUR-I
Remote
control unit
[Method of adjustment without measuring instrument]
Notes:
· Proceed to the following this adjustment after having completed the
adjustment of SUB CONT.
· Set PICTURE MODE (VSM) to "BRIGHT".
­ PAL COLOUR ­
1. Receive a PAL broadcast.
2. Select 2. VC from the SERVICE MENU.
3. Select 5. COLOUR with the MENU &/^ key.
4. Set the initial setting value for PAL COLOUR with the MENU ­/+ key.
5. If the colour is not best with the initial setting value, make fine ad-
justment until you get the best colour.
6. Press the DISPLAY key twice to return to the normal screen.
­ SECAM COLOUR ­
7. Receive a SECAM broadcast.
8. Press the COLOUR SYSTEM button on the remote control unit to
select the SECAM colour system.
9. Make fine adjustment of SECAM COLOUR in the same way as for
"PAL COLOUR".
­ NTSC 3.58 COLOUR ­
10. Receive a NTSC 3.58MHz broadcast.
11. Press the COLOUR SYSTEM button on the remote control unit to
select the NTSC 3.58 colour system.
12. Make similar fine adjustment of NTSC 3.58 COLOUR in the same
way as for "PAL COLOUR".
­ NTSC 4.43 COLOUR ­
When adjustment is done for NTSC 3.58 COLOUR, appropriate
values are automatically set for NTSC 4.43 COLOUR.
5. COLOUR
Adjustment
of SUB
COLOUR-II
Signal
generator
Oscilloscope
Remote
control unit
5. COLOUR
[Method of adjustment using measuring instrument]
Notes:
· Proceed to the following this adjustment after having completed the
adjustment of SUB CONT.
· Set PICTURE MODE (VSM) to "BRIGHT".
­ PAL COLOUR ­
1. Receive a PAL colour bar signal (full field colour bar 75% white).
2. Select 2. VC from the SERVICE MENU.
3. Select 5. COLOUR with the MENU &/^ key.
4. Set the initial setting value of PAL COLOUR with the MENU ­/+ key.
5. Connect the oscilloscope between TP-47G and TP-E.
6. Adjust PAL COLOUR to set the value (A) in the figure to +14V (VW-G).
­ SECAM COLOUR ­
7. Receive a SECAM colour bar signal (full field colour bar 75% white).
8. Press the COLOUR SYSTEM button on the remote control unit to
select the SECAM colour system.
9. Set the initial setting value of SECAM COLOUR with the MENU ­/+ key.
10. Adjust SECAM COLOUR to set the value (A) in the figure to +5V
(VW-G).
­ NTSC 3.58 COLOUR ­
11. Receive a NTSC 3.58 colour bar signal (full field colour bar 75% white).
12. Press the COLOUR SYSTEM button on the remote control unit to
select the NTSC 3.58 colour system.
13. Set the initial setting value of NTSC 3.58 COLOUR with the MENU
­/+ key.
14. Adjust NTSC 3.58 COLOUR to set the value (A) in the figure to
+5V (VW-G).
­ NTSC 4.43 COLOUR ­
When adjustment is done for NTSC 3.58 COLOUR, appropriate
values are automatically set for NTSC 4.43 COLOUR.
TP-47G
TP-E (
H)
[CRT
SOCKET
PWB]
Mg
B
(­)
0V
(+)
R
Cy
Y
W
G
(A)