AV-28NT4SU
AV-28NT4BU
DEUTSCH
FRANÇAIS
NEDERLANDS
ITALIANO
ENGLISH
CASTELLANO
FARBFERNSEHGERÄT
TELEVISEUR COULEUR
KLEURENTELEVISIE
TELEVISOR A COLOR
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D'INSTRUCTIONS
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
INSTRUZIONI
TELEVISORE A COLORI
AV-21NT4SU
AV-21NT4BU
WATER AND MOISTURE
The apparatus shall not be exposed to dripping or splashing water and no object filled with liquids, such as vases , should
be placed on the apparatus.
HEAT
Never place the set near heat sources.
Never put a naked flame, such as a candle, on the top of TV set.
VENTILATION
Do not cover the ventilation openings in the cabinet and never place the set in a confined space such as in a bookcase or
built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
OBJECT ENTRY
Do not insert foreign objects, such as needles and coins, in the ventilation openings.
LIGHTNING STRIKE
You should disconnect the set from the mains and the aerial system during thunderstorms.
CLEANING
Unplug the set from the mains while cleaning.
AFTER MOVING THE SET
If the set is moved or turned, the MAIN POWER button must be switched off for at least 15 minutes in order to take out
colour patches on the screen.
CAUTION
There is danger of choking or suffocation if the cap which is removed from the TV is accidentally swallowed by children.
Store the cap out of the reach of children.
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly
before you begin.
1.
2.
3.
4.
5.
6.
7.
8.
RM-C1514
RM-C1514
A2
A1
A3
A4
A7
A9
A10
A14
A12
A19
A23
A26
A6
A18
A5
A8
A15
A13
A24
A11
A21
A17
MENU
A25
A16
A22
A20
2
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
B1
B2
B3
B4
B5 B6
B7
B8
B9
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A23
A24
A25
A26
PICTURE/OK
PICTURE/OK
MENU
AV
i
X
V
?
MENU
I/II
/I
/I
9
1
0
0
9
D
zoom
IDENTITY OF LOCAL & REMOTE CONTROL
LOCAL CONTROL
Front
Rear
AERIAL socket
SCART 1 socket EXT-1
SCART 2 socket EXT-2
REMOTE CONTROL
TV mode
SOUND MUTE
POWER
NUMBER 0..9
ZOOM / SKIP
SOUND EFFECT / MOVE
SLEEP / DELETE
Not used
TV > TELETEXT
PICTURE / OK
MENU
PROGRAM UP (CURSOR UP)
PROGRAM DOWN (CURSOR DOWN)
VOLUME DOWN (CURSOR LEFT)
VOLUME UP (CURSOR RIGHT)
TV / AV
Not used
Not used
Not used
Not used
Not used
Not used
Not used
Not used
INFORMATION
VCR / TELETEXT / DVD switch
MODE Stereo/Mono
Dual language
SOUND MUTE
POWER
NUMBER 0..9
RED
GREEN
YELLOW
CYAN
TELETEXT > TV
Not used
VOL/BRIGHTNESS MENU
SELECTION
PAGE UP
PAGE DOWN
VOL / BRIGHTNESS DOWN
VOL / BRIGHTNESS UP
Not used
PAGE HOLD
Not used
REVEAL
DOUBLE SIZE
Not used
Not used
CANCEL
INDEX
SUBPAGE
VCR / TELETEXT / DVD switch
Not used
TELETEXT mode
ENGLISH
I/II
AV-21NT4 MODEL
AV-28NT4 MODEL
B1
B2
B3
B4
B5
B6
B7
B8
B9
EXT-3
SETTING UP
Batteries
Insert the main plug into a
220 - 240V 50Hz AC power
socket.
Open remote control battery compartment (at the
rear) and insert two 1.5V type AA / R6 batteries.
Warning: be careful to respect battery polarities.
START UP
LANGUAGE MENU
PICTURE/OK
P
P
The very first time that you turn on the TV, the LANGUAGE menu will appear on the screen.
Its purpose is to enable you to select the language that will be used for all the OSD (On
Screen Display) menus. The user must enter a choice of language before proceeding further.
The descriptions used in the menu are those of the country code (e.g. GB = English, NL =
Holland etc).
Selection is made by use of the remote control CURSOR UP (A11) / CURSOR DOWN (A12) buttons and CURSOR LEFT (A13) /
RIGHT (A14) buttons. Once you are satisfied with your selection, push the OK button (A9) to confirm your choice, and then the menu
will disappear.
The language entered at this stage can still be modified at any later time, by entering the LANGUAGE selection (accessed from the
FEATURES menu page 9).
Note : The languages shown are subject to modification without prior notice.
3
SWITCHING ON
Switch the TV set on with the MAIN POWER button (B1).
Connect aerial to aerial jack.
It is usually connected by
means of a 75 ohm cable.
3
ENGLISH
LANGUAGE
BG CZ D DK E
F FIN GB GR H
I N NL P PL
RO RUS S
4
EDIT
PR
06
05
04
03
02
01
00
SKIP
ATSS - Auto Tuning and Sorting System
After selecting country code, press and hold OK button for 3 - 4 seconds until "Please wait!" is displayed, then auto program
tuning starts searching all the available TV stations in your area. When auto tuning and sorting is completed, the EDIT menu
with the recorded programs appears on the screen.
To exit the EDIT menu, press MENU button 3 times, then the menu display will disappear from TV screen. Now you can select
program using the remote control UP (A11) or DOWN (A12) buttons.
DELETE PROGRAMME POSITION DATA
Position the cursor to the programme number you wish to delete using the
remote control UP (A11) or DOWN (A12) buttons. Press the YELLOW/DELETE
(A6) button.
The delete programme is instantly moved to programme N° 99. The programme
which was located at N° 99 will automatically move to N° 98.
INSTALLATION
MENU
MENU SELECTION
Press remote control MENU button (A10) to display the MAIN MENU.
Move the cursor to INSTALL by using the remote control CURSOR
UP (A11),DOWN(A12) buttons.
Then press the remote control OK button (A9).
Note: All menus are removed within 60 seconds if you don't press
any button.
AUTO TUNING SYSTEM
The EDIT menu shows you the programme position assignment. When
using the AUTO TUNING method, the broadcasts may not be found and
stored in the order you desired. For example, BBC1 may not be allocated to
programme number 01, and BBC2 may not be allocated to programme
number 02, etc. The EDIT menu enables you to change the programme
position assignment according to your personal preference.
To reach the EDIT menu you have to first select INSTALL menu from the
MAIN menu.
EDIT MENU
COUNTRY SELECTION
Position the cursor at ATSS Menu and select country code where TV is
used by pressing the remote control CURSOR LEFT (A13), RIGHT(A14)
buttons.
The following countries can be selected.
A,
B,
CH,
CZ,
D,
DK,
E
F,
FIN,
GB,
GR,
H,
I,
IRL
N,
NL,
P,
PL,
S,
SK
Others
CHANGING ORDER OF CHANNELS
Position the cursor to the programme number you want to move and press the
remote control GREEN (A5) MOVE button. The programme turns to red colour.
Then use the UP (A11) or DOWN (A12) buttons to move the programme
number you wish to store it to and press MOVE button again to confirm the
operation. Press MENU to return to INSTALL menu.
PICTURE/OK
P
PICTURE/OK
ENGLISH
NAME
CH 4
S4C
CH 4
IT V
BBC 2
BBC 1
-------
CH
C46
C39
C05
C31
C34
C37
C21
INSTALL
ATSS
EDIT
SYSTEM
CHANNEL
FREQUENCY
NAME
PROGRAM
STORE TO
GB
G B
C 46
671.25
BBC 1
01
01
PICTURE
SOUND
INSTALL
FEATURES