Users Guide
32PD3000
42PD3000
SCREEN
X832140-02-02(It).qxd
9/12/02
6:50 PM
Page 1
Software Notice
It is prohibited for the end user of this product to copy, reverse engineer or reverse
compile the software included therein, save to the extent permitted by law.
Caution
To prevent scratching or damaging the plasma screen face, do not knock or
rub the surface with sharp or hard objects. Clean the screen with a soft cloth
moistened with warm water and dry with a soft cloth. A mild soap may be used
if the screen is extremely dirty. Do not use harsh or abrasive cleaners!
TruBass
TruBass, SRS and
symbol are trademarks of SRS Labs, Inc.
TruBass technology is incorporated under license from SRS Labs, Inc.
Important
Dear HITACHI customer
Congratulations on your purchase of the very latest state of the art television from
HITACHI. At Hitachi we pride ourselves on producing high quality televisions with
outstanding picture and audio capabilities. Together with our reputation for superior
reliability, you should enjoy many years of trouble free operation from your TV.
Please read this Users Guide thoroughly, especially the Safety Notes
on Pages 4 & 5. Mis-use may cause damage to your plasma
television, which could shorten its lifespan, or cause injury to yourself.
Should you encounter any difficulty in the set-up or operation of your
television, firstly refer to the Trouble Shooting Guide at the rear of this manual.
In the unlikely event of a problem occurring with your plasma TV, switch off
at the mains sockets, pull out the plugs, and contact your dealer immediately.
Please take notice that there are some high voltage parts inside the TV even
though Mains Switch is turned off.
Please pull out the Mains Plug from the socket to cut the Mains voltage completely
for safety.
Under no circumstances remove the rear cover of your plasma screen or
the casing of your Audio VIsual Control (AVC) unit.
Never guess or take any chances with electrical equipment of any kind - it
is better to be safe than sorry!
Plasma Screen
After the plasma screen has been on for any length of time, you will notice that
the screen becomes warm. Sometimes the screen might have some tiny bright or
dark spots. Please note that this is normal.
X832136-02-02(En)
9/13/02
10:38 AM
Page 2
contents
contents
safety aspects
television safety ......................................................................................................4
battery safety and installation ................................................................................6
rear socket and scart details. ......................................................................................7
set-up
plasma screen, AVC unit and equipment connection..............................................8
speaker assembly (42PD3000 model only) ............................................................10
front control panel details ..............................................................................................12
handset controls
programme tuning ..................................................................................................13
television/VCR operation ........................................................................................14
Teletext functions ....................................................................................................15
tuning in
TV set-up and automatic tuning procedure ............................................................16
manual tuning procedure ........................................................................................18
programme sort ......................................................................................................20
programme name change and download ..............................................................21
viewlink....................................................................................................................22
customer I.D. ..........................................................................................................24
password change ....................................................................................................25
programme, sound and vision adjustment
picture controls ........................................................................................................26
NICAM and stereo sound controls ..........................................................................27
audio and TruBass controls ....................................................................................28
television features
sleep timer and on screen display ..........................................................................30
wide screen viewing ................................................................................................31
Teletext operation ..................................................................................................33
other equipment
other equipment connection ..................................................................................35
signal source entry ..................................................................................................36
other features
language and installation ........................................................................................38
programme download and demo mode ..................................................................39
screen saver, screen wipe & no signal shutdown ..................................................40
PC mode ................................................................................................................41
information
trouble shooting guide ............................................................................................45
guarantee ................................................................................................................46
HITACHI environmental notice ................................................................................47
technical data ..........................................................................................................48
OSD Menu Flow chart ............................................................................................49
3
Caution
Avoid displaying still images on the plasma TV for an extended time as it may result in a
residual image, and permanently damage the Plasma Display. Examples:-Video games, Station Logos,
Computer Images, images in 4:3 picture ratio, Teletext or PC window etc.
It is recommended that still display images are changed at appropriate intervals. Minor residual
images can be removed by using the "SCREEN WIPE" feature (see page 40).
X832136-02-02(En)
9/13/02
10:38 AM
Page 3
DO NOT remove any fixed cover as this may
expose dangerous voltages.
DO NOT position the plasma screen on top of the
AVC unit as it could cause damage to the unit.
4
tele
vision
saf
ety
saf
ety
aspects
This plasma television has been designed and manufactured to meet international safety
standards, but like any electrical equipment, care must be taken if you are to obtain the best
results and safety is to be assured.
DO NOT continue to operate the equipment if
you are in any doubt about it working normally
or if it is damaged in any way - switch off,
withdraw the mains plug and consult your dealer.
DO be careful with any glass panels or doors on
equipment.
DO consult your dealer if you are in any doubt
about installation, operation or safety of your
equipment.
DO place your TV on a flat surface, or if
supplied, the stand accessory.
DO ensure that all connections, (including the
mains plug, extension leads and inter-
connections between the pieces of equipment),
are properly made and in accordance with the
manufacturers instructions. Switch off and
withdraw the mains plug before making or
changing connections.
DO NOT listen to headphones at high volume,
as such use can permanently damage your
hearing.
SHOULD you require to replace the fuse in the
moulded plug with a new fuse, then please replace
with one of the same value, type and approval as the
original. Ensure the fuse cover is returned to its
original position.
TO prevent scratching or damaging the plasma
screen face, do not knock or rub the surface with
sharp or hard objects. Clean the screen with a soft
cloth moistened with warm water and dry with a soft
cloth. A mild soap may be used if the screen is
extremely dirty. Do not use harsh or abrasive cleaners!
AUDIO VISUAL CONTROL STATION
AV3000F
AUDIO VISUAL CONTROL STATION
AV3000F
IF you intend placing this TV into a cabinet or a wall
alcove, please ensure there is at least a 100mm
(10cm) gap to the sides, rear and top of the TV. This
is to allow for adequate ventilation during your TV's
operation.
DO read the operating instructions before you
attempt to use the equipment.
DO observe the manufacturers instructions when
connecting extension leads to your TV. The fuse
should be a 5 Amp fuse with the safety symbols
and
displayed. If you are in any doubt
about the extension installation, please consult a
competent electrician.
AUDIO VISUAL CONTROL STATION
AV3000F
X832136-02-02(En)
9/13/02
10:38 AM
Page 4
DO NOT cut off the fitted mains plug as it
may contain a special radio interference
filter, the removal of which could lead to
impaired performance. If you wish to
extend the lead, obtain an appropriate
extension lead or consult your dealer.
DO NOT leave equipment switched on when it is
unattended unless it is specifically stated that it is
designed for unattended operation or has a
stand-by mode. Switch off using the switch on the
equipment and show your family how to do this. Make
special arrangements for infirm or handicapped people.
NEVER guess or take chances with
electrical equipment of any kind - it
is better to be safe than sorry!
tele
vision
saf
ety
saf
ety
aspects
NEVER let anyone, especially children, push
anything into holes, slots, or any other opening in
the case - this could result in a fatal electrical
shock.
Under NO circumstances remove the rear cover of
your plasma screen or the casing of your Audio
Visual Control (AVC) unit!
DO NOT place objects filled with liquids, e.g. a
vase, on, or close to the equipment, to avoid
spillages into the inside of the apparatus.
DO NOT place hot objects such as candles or
nightlights on, or close to equipment. High
temperatures can melt plastic and lead to fires.
DO NOT obstruct the ventilation of the equipment, for
example with curtains or soft furnishings. Overheating
will cause damage and shorten the lifespan of your
equipment.
DO NOT use makeshift stands and NEVER fix legs
with wood screws - to ensure complete safety,
always fit the manufacturers approved stand or legs
with the fixings provided according to the
instructions.
DO NOT allow electrical equipment to be exposed
to rain or moisture.
AUDIO VISUAL CONTROL STATION
AV3000F
DO NOT lie the plasma screen flat.
AUDIO VISUAL CONTROL STATION
AV3000F
AUDIO VISUAL CONTROL STATION
AV3000F
AUDIO VISUAL CONTROL STATION
AV3000F
AUDIO VISUAL CONTROL STATION
AV3000F
5
X832136-02-02(En)
9/13/02
10:38 AM
Page 5