USER'S GUIDE ANALOG (HK-K)
1
[Module 1362, 1398, 1770]
To Set Time
Pull the crown out. Set the hands by turning
the crown in either direction. Push the crown
in on a time signal.
[Module 705, 1330, 1344, 1360, 1399, 1747, 1771]
To Set Time
1) Pull the crown out when the second hand
is at 12 o'clock position and the second
hand stops.
2) Set the hands by turning the crown.
3) In accordance with a time signal, push the
crown in.
[Module 707, 708, 1331, 1332, 1342, 1345, 1346,
1787, 2717, 2718, 2719, 2725, 2731]
To Set Time
1) Pull the crown out to the second click when
the second hand is at 12 o'clock position and
the second hand stops.
2) Set the hands by turning the crown.
3) In accordance with a time signal, push the
crown in.
To Set Date
1) Pull the crown out to the first click.
2) Set the date by turning the crown.
3) Push the crown in to the normal position.
[Module 709, 1333, 1347]
To Set Time
1) Pull the crown out to the second click when
the second hand is at the 12 o'clock position
and the second hand stops.
2) Turn the hands clockwise and put the watch
four or five minutes forward. Then back them
out.
3) Push the crown in to the normal position on a
time signal.
To Set Day-date
1) Pull the crown out to the first click.
2) Set the date by turning the crown
counterclockwise.
Set the day by turning the crown clockwise.
Check whether the day is English or Spanish.
3) Push the crown in to the normal position.
Avoid setting the day-date between 8:00 p.m. and 1:00 a.m.
(the day-date display may not change in the following day).
For watch with the elapsed time bezel
Rotate the elapsed time bezel to align the
mark
with the minute hand.
After certain amount of time elapsed, read the gradua-
tion on the elapsed time bezel which the minute hand
points to.
The elapsed time is indicated.
[Module 1782]
Module No.
705, 707, 708, 709, 1330, 1331, 1332, 1333, 1342, 1344, 1345, 1346, 1347, 1360,
1362, 1398, 1399, 1747, 1770, 1771, 1782, 1787, 2717, 2718, 2719, 2725, 2731
Crown
Crown
30
First click
(Setting
date)
Second click
(Setting time)
Crown
(Normal position)
The configuration of your
watch may differ somewhat
from that shown in the
illustration.
[Day display]
English
Spanish
SUN
DOM
MON
LUN
TUE
MAR
WED
MIER
THU
JUEV
FRI
VIER
SAT
SAB
SUN 30
Crown
(Normal position)
First click
(Setting
day-date)
Second click
(Setting time)
5
0
40
30
20
10
Elapsed time bezel
·
Some water resistant models are equipped with a screw
lock crown.
·
With such models, you must unscrew the crown in the
direction noted in the illustration to loosen it before you can
pull it out. Do not pull too forcibly on such crowns.
·
Also note that such watches are not water resistant while
their crowns are loosened. Be sure to screw the crowns
back in as far as they will go after making any setting.