USER'S GUIDE HS-3(V) HS-6
1
MA0212-A
Seconds
1/100 second
SPLIT/LAP indicator
indicates the SPLIT mode.
indicates the LAP mode.
Minutes
Hours
· A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before
using the stopwatch.
· Depending on the stopwatch model, the configuration of your stopwatch may differ somewhat from that shown in
the illustration.
Seconds
1/100 second
SPLIT/LAP indicator
indicates the SPLIT mode.
indicates the LAP mode.
Minutes
Hours
USER'S GUIDE HS-3(V) HS-6
2
SPLIT
(a+b+c)
Press A.
Press B
to reset.
SPLIT
(a)
SPLIT
(a+b)
b
(a)
(b)
Press A
in SPLIT
mode.
Press B when the
first runner
(a)
finishes.
Displays time of
first runner.
Press A when the
second runner
(b)
finishes.
Press B to
display the time of
the second runner.
Press A in
LAP mode.
Press B to
freeze LAP
time
(a).
Press B to
release.
Press B to
freeze LAP
time
(b).
Press B to
release.
Press A.
Press B to reset.
Press B
to reset.
· SPLIT timing
START
STOP
0a
(a)
b
(a+b)
c
(a+b+c)
(t)
Press A in
Press B to freeze SPLIT
Press B to freeze SPLIT
SPLIT mode.
time
(a). Press B to release.
time
(a+b). Press B to release.
· 1st-2nd place times
START
SPLIT
STOP
SPLIT release
RESET
0a
(a)
(b)
· LAP timing (Lap timing for each segment of an event)
START
STOP
STOP
STOP
START
START
0a
(a)
b
(b)
c
(c)
LAP
(a)
LAP
(b)
LAP
(c)
USING THE STOPWATCH
A Press this button to start and stop elapsed time measurement.
B Press this button while an elapsed time measurement is in progress to momentarily freeze a SPLIT or LAP
time on the display (timing continues internally). Press again to display the ongoing time measurement. You can
repeat the LAP/SPLIT time operation as many times you want. Pressing this button while elapsed time
measurement is stopped resets the time to all zeros.
C Press this button to toggle between the SPLIT time mode and LAP time mode.
· The maximum elapsed time that can be measured is 9 hours, 59 minutes, 59.99 seconds.
A SPLIT is the time from the start of an event up to any specific point.
A LAP is the time for one segment (lap) of an event.
ENGLI
How to operate the stopwatch
· Normal time measurement
START
STOP
0a
(a)
Press A.
Press A.
Press B to reset
to zero.
· Net times (Accumulated time excluding loss time)
START
STOP
START
STOP
0a
(a)
(a)
b
(a+b)
Press A.
Press A.
Press A.
Press A.
SPLIT
LAP
Press B to reset
to zero.
(Lost time)