CASIO GT2000-1V - Owner's Manual Immediate Download

Module No. 2263

2263-1

GENERAL GUIDE

· If the contents of the display seem to be continually changing, see "AUTO DISPLAY FUNCTION" for information on how to stop it.

· Press C

C to change from mode to mode.

· In any mode, press L

L to illuminate the display for about two seconds.

Caution

· The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use.

· Frequent use of the backligfht shortens the battery life.

· The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch.

Timekeeping Mode

File Mode

Alarm Mode

Stopwatch Mode

TIMEKEEPING MODE

This watch lets you select any two of 40 cities (TIME 1, TIME 2) as basic Timekeeping

Mode times. Hold down D

D to toggle the Timekeeping Mode between TIME 1 and TIME 2.

· You can display either the city code or year. Press A

A to toggle between display

of the city code and year.

To set the time and date

Setting the time and date for either of the basic times (TIME 1 or TIME 2)

automatically adjusts the settings of the other basic time.

· You can turn daylight saving time (DST) on and off independently for TIME 1 and

TIME 2.

1. While in the Timekeeping Mode, hold down A

A until the City Code flashes on the

display.

2. Press C

C to change the selection (flashing) in the following sequence.

3. While the seconds setting is selected (flashing), press D

D to reset it to 00. If you

press D

D while the seconds setting is in the range of 30 to 59, the seconds are

reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of

00 to 29, the minutes count is unchanged.

· While City Code setting is selected (flashing), press D

D or B

B to scroll through the

City Code. (For full information on City Code, see the CITY CODE TABLE.)

· While the DST setting is selected, press D

D to toggle it ON and OFF.

· While the 12/24-hour format setting is selected, press D

D to toggle it between 12

and 24.

· While any other setting is selected (flashing), press D

D to increase it or B

B to

decrease it.

· Holding down either button changes the setting at high speed.

4. After you set the time and date, press A

A to return to the Timekeeping Mode.

· The day of the week is automatically set in accordance with the date.

· The date can be set within the range of January 1, 1995 to December 31, 2039.

· If you do not operate any button for a few minutes while a setting is flashing, the

flashing stops and the watch goes back to the Timekeeping Mode automatically.

Press A

Hold down D

Month-Day

Day of week

City code

Year

DST on

indicator

TIME 2

TIME 1

City Code

DST

Hour

Minutes

Day

Month

Year

Seconds

12/24-Hour

Format

FILE MODE

Caution

The following causes all data stored in memory to be deleted. Be sure to

always keep separate written copies of all important data.

· Malfunction or repairs

· Dead battery

· Battery replacement

In no event will CASIO be liable for loss of data or any damages arising out of

such loss.

The File Mode lets you store up to 30 pairs

of name and telephone number data. The

name can be up to 8 characters long and the

number up to 12 digits. Data is automatically

sorted into alphabetical order based on the

name data. You can recall data by scrolling

through it on the display.

· If you do not operate any button for a few

minutes while in the File Mode, the watch

automatically goes back to the

Timekeeping Mode.

Mode indicator

Number

area

Name area

To input File data

1. In the File Mode, press B

B or D

D until the new

data display appears.

· If the message "FULL" appears on the display, it

means that memory is full. To store more data,

you will first have to delete some of the data.

2. Hold down A

A until the flashing cursor appears

on the name area.

3. Use B

B or D

D to input a character at the cursor

position. The character changes in the

following sequence. Holding down either

button changes the character at high speed.

Remaining

memory

[New data display]

A to Z

0 to 9

(Space)

··

Press

4. After you select the character you want, press C

C to advance the cursor to the

right.

· Repeat steps 3 and 4 until you complete name input.

· You can input up to 8 characters in the name area.

5. After the name input is through, use C

C to move the cursor to the number area.

6. While the cursor is in the number area, use B

B or D

D to input a number you want.

The character changes in the following sequence. Holding down either button

changes the character at high speed.

7. After you select the character you want, press C

C to advance the cursor to the

right.

· Repeat steps 6 and 7 until you complete number input.

8. After inputting the data you want, press A

A to store it into memory.

· The message "SORT" appears on the display for a few seconds.

· The name area shows only 5 characters, but automatically scrolls from right to left

to show all of the characters that make up the text.

To scroll through File data

In the normal File Mode (when the display is not flashing), press D

D to scroll

forward or B

B to scroll backward through stored data.

· The data item that is displayed when you exit the File Mode will be the first data

to appear when you enter the File Mode again.

To edit File data

1. In the File Mode, use B

B and D

D to scroll through the data items and display the

one you want to edit.

2. Hold down A

A until the flashing cursor appears on the display.

3. Use C

C to move the cursor to the character you want to change.

4. Use B

B or D

D to select the character you want.

· For details, see "To input File data" (steps 3 through 4 for name input, or 6

through 7 for number).

5. After editing the data, press A

A to store it.

To delete File data

1. In the File Mode, use B

B and D

D to scroll through the data items and display the

one you want to delete.

2. Hold down A

A until the flashing cursor appears on the display.

3. Press B

B and D

D at the same time to delete the data item.

· The message "CLR" (clear) appears on the display for a few seconds.

· At this time the cursor appears on the display ready for input.

4. Input data or press A

A to return to the File Mode.

(Hyphen)

0 to 9

(Space)

Press

2263-2

ALARM MODE

When the Daily Alarm is turned on, the alarm

sounds for 20 seconds at the preset time each day.

Press any button to stop the alarm after it starts to

sound. When the Hourly Time Signal is turned on,

the watch beeps every hour on the hour.

· The alarm sounds when the time selected for basic

timekeeping in the Timekeeping Mode (TIME 1 or

TIME 2) matches the alarm time you set.

To set the alarm time

1. Hold down A

A while in the Alarm Mode. The hour

digits flash on the display because they are

selected. At this time the Daily Alarm is turned on

automatically.

2. Press C

C to change the selection in the following

sequence.

Hour

Minutes

3. Press D

D to increase the selected digits and B

B to decrease them. Holding down

either button changes the selection at high speed.

· The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

· When setting the alarm time using the 12-hour format, take care to set the time

correctly as morning (no indicator) or afternoon (P).

4. After you set the alarm time, press A

A to return to the Alarm Mode.

· If you do not operate any button for a few minutes while a selection is flashing,

the flashing stops and the watch goes back to the Alarm Mode automatically.

To switch the daily alarm and hourly time signal on and off

Press D

D while in the Alarm Mode to change the status of the daily alarm and

hourly time signal in the following sequence.

To test the alarm

Hold down D

D while in the Alarm Mode to sound the alarm.

Hourly Time

Signal Only

Daily Alarm

Only

Both OFF

Both ON

Alarm on indicator

Hourly time signal on indicator

(a) Elapsed time measurement

Start

Stop

Re-start

Stop

Clear

(b) Split time measurement

Start

Split

Split release

Stop

Clear

Start

Split

Stop

Split release

Clear

First runner

finishes.

Second runner

finishes.

Record time of

first runner.

Record time of

second runner.

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed

time, split times, and two finishes. The range of

the stopwatch is 59 minutes, 59.99 seconds.

Mode indicator

Current

time

Minutes

Seconds

1/100 seconds

AUTO DISPLAY FUNCTION

The Auto Display function of this watch continually changes the contents of the display.

Note that you cannot use any of the watch's other functions while the Auto Display

function is operating.

To turn the Auto Display on

Hold down C

C for about two or three seconds in any mode until the watch beeps.

To turn the Auto Display off

Hold down C

C for about two or three seconds until the watch beeps. At this time the

watch is in the Timekeeping Mode.

Note

The Auto Display function cannot be performed while you are making settings (i.e.

while digits or other setting are flashing on the display).

ADL

ADELAIDE

+9.5

ANC

ANCHORAGE

BER

BERLIN

+01

BKK

BANGKOK

+07

CAI

CAIRO

+02

CCS

CARACAS

CHI

CHICAGO

DAC

DHAKA

+06

DEL

DELHI

+5.5

DEN

DENVER

DXB

DUBAI

+04

GUM

GUAM

+10

HKG

HONG KONG

+08

HNL

HONOLULU

IST

ISTANBUL

+02

JED

JEDDAH

+03

JRS

JERUSALEM

+02

KBL

KABUL

+4.5

KHI

KARACHI

+05

LAX

LOS ANGELES

LON

LONDON

+00

MEX

MEXICO CITY

MIA

MIAMI

MIL

MILAN

+01

MLE

MALE

+05

NOU

NOUMEA

+11

NYC

NEW YORK

PAR

PARIS

+01

PPG

PAGO PAGO

RGN

YANGON

+6.5

RIO

RIO DE JANEIRO

ROM

ROME

+01

SEL

SEOUL

+09

SFO

SAN FRANCISCO

SIN

SINGAPORE

+08

SYD

SYDNEY

+10

THR

TEHRAN

+3.5

TYO

TOKYO

+09

WLG

WELLINGTON

+12

YVR

VANCOUVER

CITY CODE TABLE

City Code

City

GMT differential

Based on data as of December 1997.

Mode

indicator

Minutes

Hourly time

signal on

indicator

Alarm on

indicator

Hour

Current time