CASIO GT002C-N1T - Owner's Manual Immediate Download

1633/1814-1

Module No. 1633/1814

TIME TEL SCH VIT ALM STW

· If the contents of the upper part of the display seem to be continually

changing, see "AUTO DISPLAY FUNCTION" for information on how to

stop it.

· The operational procedures for modules 1633 and 1814 are identical. All of

the illustrations in this manual show module 1633.

· Press M to change from mode to mode.

· Press L in any mode to illuminate the display for about one second.

Timekeeping Mode

Stopwatch Mode

· When the text in the text area of the display contains more than five

characters, it automatically scrolls. Text scrolling in the text area stops

moving whenever an alarm is sounding.

· In any mode other than Stopwatch Mode, the watch automatically returns to

the Timekeeping Mode if you do not perform any button operation for two or

three minutes.

TIME TEL SCH VIT ALM STW

Alarm Mode

TIME TEL SCH VIT ALM STW

Schedule-memo Mode

Vital Statistics/ID Mode

Text area

Telememo Mode

TIME TEL SCH VIT ALM STW

Mode

Light

[Module 1633]

Press M

[Module 1814]

TIMEKEEPING MODE

In addition to normal timekeeping, the Timekeeping

Mode is also used to set the current time and

date. You can also adjust the seconds count to

"00" at any time by pressing two buttons.

To adjust the seconds count to

"00"

In the Timekeeping Mode, press B and C

simultaneously to adjust the seconds count to

00.

· If you press B and C at the same time while

the seconds count is in the range of 30 to 59, the

seconds are reset to 00 and 1 is added to the

minutes. If the seconds count is in the range of

00 to 29, the minutes count is unchanged.

To set the time and date

1. Hold down A while in the Timekeeping Mode until the seconds digits start

to flash on the display. The seconds flash because they are

selected.

· While the seconds digits are selected (flashing), press C to reset the

seconds to 00.

2. Press M to change the selection in the following sequence.

Seconds

Hour

Minutes

Year

Month

Date

3. While any other digits (besides seconds) are selected (flashing), press C

to increase the number or B to decrease it. Holding down either button

changes the current selection at high speed.

· While any digits are selected, press L to switch between the 12-hour and

24-hour formats.

· When the 12-hour format is selected, the 12H indicator appears in the text

area of the display. With the 12-hour format, the P indicator appears on the

display to indicate "p.m." times. There is no indicator for "a.m." times.

Selecting the 24-hour format causes the 24H indicator to appear in the

text area, and the 24 indicator to appear on the display.

4. After you set the time and date, press A to return to the Timekeeping

Mode.

· The day of the week is automatically set in accordance with the date.

· The date can be set within the range of January 1, 1995 to December 31,

2039.

· If you do not operate any button for a few minutes while a selection is

flashing, the flashing stops and the watch goes back to the Timekeeping

Mode automatically.

TIME TEL SCH VIT ALM STW

BACKLIGHT

This watch features an electroluminescent (EL)

backlight that helps you easily read the face, even

in total darkness. Its Auto Light Switch function

automatically lights the watch face whenever you

turn your wrist towards your face.

Notes

· The backlight of the watch employs an

electroluminescent (EL) light, which loses

illuminating power after very long use.

· Frequent use of the backlight shortens the battery life.

· The illumination provided by the backlight may be hard to see when viewed

under direct sunlight.

· The watch will emit an audible sound whenever the display is illuminated.

This is caused by a transistor that vibrates when the EL panel lights up. It

does not indicate malfunction of the watch.

· The backlight automatically turns off whenever an alarm sounds.

To manually turn on the backlight

In any mode, press L to illuminate the display for about one second.

To turn the Auto Light Switch function on and off

In the Timekeeping Mode, hold down C for one or two seconds to turn the

Auto Light Switch function on and off.

TIME TEL SCH VIT ALM STW

AUTO

TIME TEL SCH VIT ALM STW

· The Auto Light Switch on indicator is shown on the display in all modes

while the Auto Light Switch function is on.

· In order to protect against running down the battery, the Auto Light Switch

function is automatically turned off approximately two hours after you turn it

on. Repeat the above procedure to turn the Auto Light Switch function back

on if you want.

· Pressing L in any mode illuminates the display for about one second,

regardless of the Auto Light Switch function on/off setting.

About the Auto Light Switch function

While the Auto Light Switch function is turned on, the backlight automatically

lights for about one second in any mode whenever you position your wrist as

described below.

Important!

Avoid wearing the watch on the inside of your wrist. Doing so causes the Auto

Light Switch to operate when it is not needed, which shortens battery life.

Auto Light Switch

on indicator

OFF

GENERAL GUIDE

TIME TEL SCH VIT ALM STW

Month Date

Seconds

Year

PM indicator

Text area

Mode indicator

Day of week

Hour : Minutes

1633/1814-2

Moving the watch to a position that is parallel to the ground and then tilting

it towards you more than 40 degrees causes the backlight to illuminate.

· The backlight may not illuminate if the face of the watch is more than 15

degrees off parallel as shown below. Make sure that the back of your hand

is parallel to the ground.

· Static electricity or magnetic force can interfere with proper operation of the

Auto Light Switch function. If the backlight does not illuminate, try moving

the watch back to the starting position (parallel with the ground) and then tilt

it back toward you again. If this does not work, drop your arm all the way

down so it hangs at your side, and then bring it back up again.

· Under certain conditions the backlight may not light until about one second

or less after turn the face of the watch towards you. This does not necessarily

indicate malfunction of the backlight.

Warning!

· Never try to read your watch when mountain climbing or hiking in

areas that are dark or in areas with poor footing. Doing so is dangerous

and can result in serious personal injury.

· Never try to read your watch when running on a roadside or in any

other location where there might be vehicular or pedestrian traffic.

Doing so is dangerous and can result in serious personal injury.

· Never try to read your watch when riding on a bicycle or when

operating a motorcycle or any other motor vehicle. Doing so is

dangerous and can result in a traffic accident and serious personal

injury.

· When you are wearing the watch, make sure that its Auto Light Switch

function is turned off before riding on a bicycle or operating a

motorcycle or any other motor vehicle. Sudden and unintended

operation of the Auto Light Switch function can create a distraction,

which can result in a traffic accident and serious personal injury.

More than 15 degrees

too high

More than 15 degrees

too low

Parallel to ground

TIME TEL SCH VIT ALM STW

Text area

Number area

[New Data Display]

Cursor

TIME TEL SCH VIT ALM STW

TELEMEMO MODE

The Telememo Mode lets you store up to 100*

pairs of name and telephone number data.

Stored data is sorted automatically into

alphabetic sequence based on the text area

text.

* The Telememo Mode shares memory with

the Schedule-memo Mode. This means that

the maximum number of Telememo Mode

entries you can store is reduced by one each

time you store a Schedule-memo Mode data

item.

· Whenever you enter the Telememo Mode,

the text TELEPHONE scrolls across the

text area of the display once. Next, Telememo

data appears on the display. You can interrupt

scrolling of the initial text and immediately

display Telememo data at any time by pressing

A, B, or C.

· See the "CHARACTER LIST" at the back of this manual for details on how

the watch sorts data.

· The data item that appears on the display when you enter the Telememo

Mode is the same one that was displayed the last time you exited the

Telememo Mode.

To input new Telememo data

1. In the Telememo Mode, press B and C at the

same time to display the new data display.

· If there is no Telememo data stored in memory

yet, the new data display appears as soon as

you enter the Telememo Mode.

· If the message FULL appears in the text area

of the display, it means that memory is full. To

store more data, you will first have to delete

some of the data stored in memory.

Remaining

memory

Mode indicator

Text area

TIME TEL SCH VIT ALM STW

Text area

Text

Month Date

Hour : Minutes

Mode indicator

Remaining

memory

Text area

Parallel to

ground

than

2. Hold down A until the flashing cursor appears in the text area of the

display.

3. Input a name in the text area and a telephone number in the number area.

· You can input up to eight characters in the text area, and 12 digits in the

number area.

· You can input only hyphens, numbers and spaces in the number area (you

cannot input text).

Use B and C to input characters, and M to move the cursor around the

display. For details, see "INPUTTING TEXT".

4. After inputting your data, press A to store it and return to the Telememo

Mode.

· When you press A to store data, the message SORT appears on the

display for a few seconds. After the sort operation is complete, the normal

Telememo Mode display (without the cursor) appears.

To recall Telememo data

In the Telememo Mode, press C to scroll forward through stored data items

or B to scroll in reverse.

· Holding down either button scrolls through the data at high speed.

· The new data display appears whenever scrolling reaches the beginning or

the end of data currently stored in memory.

To edit Telememo data items

1. In the Telememo Mode, scroll through the data items and display the one

you want to edit.

2. Hold down A until the flashing cursor appears in the text area of the

display.

3. Use M to move the cursor to the character you want to change.

4. Change the character.

· See "INPUTTING TEXT" for details.

5. After making the changes that you want, press A to store them and return

to the Telememo Mode.

To delete Telememo data

1. In the Telememo Mode, scroll through the data items and display the one

you want to delete.

2. Hold down A until the flashing cursor appears in the text area of the

display.

3. Press B and C at the same time to delete the Telememo data item.

· At this time the cursor appears in the text area, ready for input.

4. Press A to return to the Telememo Mode.

SCHEDULE-MEMO MODE

Schedule-memo Mode lets you store up to 100*

Schedule-memo data items (appointment date

and time, and text). Whenever a time you set is

reached, an alarm sounds and the text you

input for the data scrolls across the text area of

the display.

* The Schedule-memo Mode shares memory

with the Telememo Mode. This means that

the maximum number of Schedule-memo

Mode entries you can store is reduced by one

each time you store a Telememo Mode data

item.

· Whenever you enter the Schedule-memo

Mode, the text SCHEDULE scrolls across

the text area of the display once. Next,

Schedule-memo data appears on the display.

You can interrupt scrolling of the initial text

and immediately display Schedule-memo data

at any time by pressing A, B, or C.

Notes

· A Schedule-memo Alarm sounds whenever a time you set is reached. It

continues for about 20 seconds or until you interrupt it by pressing any

button.

· The Schedule-memo text scrolls across the text area of the display only if

the watch is in the Timekeeping Mode when the Schedule-memo time is

reached. The text continues to scroll for about 25 seconds, or until you stop

it by pressing any button after you press a button to interrupt the alarm.

· Schedule-memo Mode data items are automatically sorted into chronological

order.

· Entering the Schedule-memo Mode causes data for the next scheduled

appointment to appear on the display.

To input new Schedule-memo data

1. In the Schedule-memo Mode, press B or C

until the new data display appears.

· If there is no Schedule-memo data stored in

memory yet, the new data display appears as

soon as you enter the Schedule-memo Mode.

· If the message FULL appears in the text area

of the display, it means that memory is full. To

store more data, you will first have to delete

some of the data stored in memory.

TIME TEL SCH VIT ALM STW

[New Data Display]

Number area

1633/1814-3

TIME TEL SCH VIT ALM STW

VITAL STATISTICS/ID MODE

The Vital Statistics/ID Mode provides a handy

place to store data about your vital statistics

(name, blood type, date of birth) and personal

identification (ID) data (credit card number,

license number, passport number, and two

undefined items).

· Whenever you enter the Vital Statistics/ID

Mode, the text VITAL

STATS./ID

scrolls across the text area of the display

once. Next, the name screen appears on the

display. You can interrupt scrolling of the initial

text and immediately display the name screen

at any time by pressing A, B, or C.

· The name screen always appears first

whenever you enter the Vital Statistics/ID

Mode.

Important!

· Once you input your vital statistics, take care that the watch is not borrowed

by another person. Otherwise, emergency medical personnel may assume

that the data in the Vital Statistics/ID Mode applies to the person who is

currently wearing the watch.

Text area

Number area

Mode indicator

· Note that storing important personal identification data in the watch's

memory runs the risk of it being misused should you lend the watch to

someone or should the watch become lost or stolen. Because of this, the

manufacturer strongly recommends that you input such important information

in coded form that cannot be deciphered by others.

· Note that CASIO COMPUTER CO., LTD. shall not be held liable to you or

any third party for any losses or damages suffered through the misuse of

data stored in the memory of this watch.

To recall Vital Statistics/ID data

In the Vital Statistics/ID Mode, press B or C to change the data on the

display in the following sequence.

NAME

(Name)

BLOOD

(Blood type)

CREDI

(Credit card

number)

BIRTH

(Date of birth)

(Undefined)

LICEN

(License

number)

PASSP

(Passport

number)

Press C

Press B

· The titles of the each data item appear in the text area of the display. In the

case of the undefined items, you can specify titles that appear in the text

area whenever you later display that item.

To input your name

1. In the Vital Statistics/ID Mode, display the

NAME screen.

2. Hold down A until the flashing cursor appears

in the text area of the display.

3. Input your name into the text area.

· You can input up to 16 characters for your name.

Use B and C to input characters, and M to

move the cursor around the display. For de-

tails, see "INPUTTING TEXT".

· You can clear the characters currently input for the name by pressing B

and C at the same time.

4. After inputting your data, press A to store it and return to the normal

NAME screen (without cursor).

To input your blood type

1. In the Vital Statistics/ID Mode, display the

BLOOD screen.

2. Hold down A until the Rh factor setting flash in

the text area of the display.

3. Use B and C to scroll through the available

Rh factor settings in the following sequence.

4. Press M to advance to the blood type.

5. Use B and C to scroll through the available blood type settings in the

following sequence.

6. After inputting your data, press A to store it and return to the normal

BLOOD screen (no flashing characters).

· Select --- if you do not want to specify an Rh factor and -- if you do not

want to select a blood type in the above sequence. When neither an Rh

factor nor blood type is specified, the blood data screen shows ----- on

the watch's display.

To input the date of your birth

1. In the Vital Statistics/ID Mode, display the

BIRTH screen.

2. Hold down A until the year digits start to flash

on the display. The year digits flash because

they are

selected.

3. Press M to change the selection in the following

sequence.

4. Press C to increase the selected digits and B to decrease them. Holding

down either button changes the selected digits at high speed.

· The year can be set in the range of 1900 to 2039.

5. After inputting your data, press A to store it and return to the normal

BIRTH screen (no flashing digits).

TIME TEL SCH VIT ALM STW

Press C

Press B

Rh factor

TIME TEL SCH VIT ALM STW

Text area

Cursor

---

R +

R -

Press C

Press B

Blood type ABO

TIME TEL SCH VIT ALM STW

Year

Month

Date

Year

Month Date

2. Hold down A until the month setting starts to flash in the number area of

the display. The month setting flashes because it is

selected.

· The initial Schedule-memo time setting is always midnight, which is indicated

as 12:00 with the 12-hour timekeeping format and 0:00 in the 24-hour

format. You can select the timekeeping format in the Timekeeping Mode.

3. Press M to change the flashing selection in the following sequence.

Month

Date

Minutes

Hour

Text *

* 11 spaces are provided for the text. This means that if you input only five

characters for the text, so you have to press M 6 times to reach the month

setting.

4. While the month, date, hour or minutes is flashing, press C to increase

the selected setting or B to decrease it. Holding down either button

changes the current selection at high speed.

Important!

· Correct storage of Schedule-memo data is impossible if you do not input a

month and date.

· The date you can specify must be within one year from the current date.

This means that if the current date (in the Timekeeping Mode) is June 30,

1997, you will be able to specify any date up to June 29, 1998 for a

Schedule-memo date.

· When setting the time using the 12-hour format, take care to set the time

correctly as morning (no indicator) or afternoon (P).

5. Input text in the text area of the display.

· You can input up to 11 characters for the text.

Use B and C to input characters, and M to move the cursor around the

display. For details, see "INPUTTING TEXT".

6. After inputting your data, press A to store it and return to the Schedule-

memo Mode.

· Schedule-memo data remains in memory until you delete it. Be sure to

delete old Schedule-memo data whenever you no longer need it. See "To

delete Schedule-memo data".

To recall Schedule-memo data

In the Schedule-memo Mode, press C to scroll forward through stored data

items or B to scroll in reverse.

· Holding down either button scrolls through the data at high speed.

· The new data display appears whenever scrolling reaches the beginning or

the end of data currently stored in memory.

To edit Schedule-memo data items

1. In the Schedule-memo Mode, scroll through the data items and display the

one you want to edit.

2. Hold down A until the month setting starts to flash in the number area.

3. Use M to move the flashing to the part of the Schedule-memo data item

you want to change.

4. Use B and C to change the data.

· See "To input new Schedule-memo data" for details on inputting data.

5. After making the changes that you want, press A to store them and return

to the Schedule-memo Mode.

To delete Schedule-memo data

1. In the Schedule-memo Mode, scroll through the data items and display the

one you want to delete.

2. Hold down A until the month setting starts to flash in the number area.

3. Press B and C at the same time to delete the Schedule-memo data item.

· The message CLEAR appears for a short while. Next, the month setting

starts to flash on the display, ready for input of new data.

4. Press A to return to the Schedule-memo Mode.

1633/1814-4

Personal identification data

· This watch has three built-in titles for personal identification data: CREDIT

(for a credit card number), LICENCE (for a license number), and

PASSPORT (for a passport number). You can use these built-in title as

they are, or append eight more characters to a built-in title to indicate a

credit card company name, for example.

· In addition to the three built-in titles, you can also input your own titles up to

eight characters long for the two undefined items.

· You can input number up to 12 digits long for each personal identification

data item.

To input personal identification data

1. In the Vital Statistics/ID Mode, display the

personal identification data screen where you

want to input data.

· See "To recall Vital Statistics/ID data" for details

on how to switch between data screens.

2. Hold down A until the flashing cursor appears

in the text area of the display.

3. Input a text in the text area if you want.

· In the case of a built-in title, you can append up to eight characters to the

preset title. For the undefined data items, you can input titles up to 8

characters long.

· To use a built-in title as it is without appending text, press M eight times to

move the cursor to the number area.

Use B and C to input characters, and M to move the cursor around the

display. For details, see "INPUTTING TEXT".

4. After you input your text, use M move the cursor to the number area and

input number data.

· You can input up to 12 digits in the number area.

· You can input only hyphens, numbers and spaces in the number area (you

cannot input text).

5. After inputting your data, press A to store it and return to the screen you

started out from in step 1 of this procedure.

To edit Vital Statistics/ID Mode data

1. In the Vital Statistics/ID Mode, scroll through the data items and display

the one you want to edit.

2. Hold down A until the data on the display starts to flash.

3. Use M to move the flashing to the part of the data item you want to

change.

4. Use B and C to change the displayed data.

· For details on inputting data, see the sections of this manual that describes

input for each screen.

5. After making the changes that you want, press A to store them and return

to the screen you started out from in step 1 of this procedure.

To delete Vital Statistics/ID Mode data items

1. In the Vital Statistics/ID Mode, scroll through the data items and display

the one you want to delete.

2. Hold down A until the data on the display starts to flash.

3. Press B and C at the same time to delete the data item.

4. Press A to return to the screen you started out from in step 1 of this

procedure.

ALARM MODE

When the Daily Alarm is switched on, the alarm

sounds for 20 seconds at the preset time each

day. Press any button to stop the alarm after it

starts to sound.

When the Hourly Time Signal is switched on, the

watch beeps every hour on the hour.

To set the alarm time

1. Hold down A while in the Alarm Mode until the

hour digits start to flash on the display. The

hour digits flash because they are

selected.

· This operation will switch the Daily Alarm on

automatically.

2. Press M to change the selection in the following

sequence.

3. Press C to increase the selected digits or B to decrease them. Holding

down either button changes the selection at high speed.

· The format (12-hour and 24-hour) of the alarm time matches the format you

select for normal timekeeping.

· When setting the alarm time using the 12-hour format, take care to set the

time correctly as morning (no indicator) or afternoon (P).

4. After you set the alarm time, press A to return to the Alarm Mode.

TIME TEL SCH VIT ALM STW

Cursor

Number area

Text area

TIME TEL SCH VIT ALM STW

Alarm on indicator

Hour

Minutes

Mode indicator

Hourly time signal

on indicator

Hour

Minutes

TIME TEL SCH VIT ALM STW

(a) Elapsed time measurement

(b) Split time measurement

Start

Stop

Split release

Re-start

Stop

Record time of

second runner.

Second runner finishes.

Record time of first runner.

Split

First runner

finishes.

Clear

Start

Stop

1/100 second

Mode indicator

Minutes

Seconds

Hours

To switch the Daily Alarm and Hourly Time Signal on

and off

Press C while in the Alarm Mode to change the status of the Daily Alarm and

Hourly Time Signal in the following sequence.

To test the alarm

Hold down B while in the Alarm Mode to sound the alarm.

STOPWATCH MODE

The Stopwatch Mode lets you measure elapsed

time, split times, and two finishes. The range of

the stopwatch is 23 hours, 59 minutes, 59.99

seconds.

[Alarm ON indicator/Hourly Time Signal ON indicator]

Both ON

Both OFF

Daily Alarm

Only

Hourly Time

Signal only

TIME TEL SCH VIT ALM STW

INPUTTING TEXT

The following describes how to input text in the Telememo Mode, Schedule-

memo Mode, and Vital Statistics/ID Mode.

How to input characters

1. When the cursor is blinking in the text area of

the display, use B and C to scroll through the

available letters, numbers and symbols, in the

following sequence.

· Holding down either button scrolls through at high speed.

· You can input Japanese characters (katakana), English alphabetic

characters, numbers, and symbols in the text area. For a complete list of

characters you can input, see "CHARACTER LIST" at the back of this

manual.

2. When the character you want at the cursor position is shown, press M to

move the cursor to the right.

3. Repeat steps 1 and 2 until your text is complete.

· You can input only hyphens, numbers and spaces in the number area.

Each press of B or C changes the input at the current cursor location in

the following sequence.

(space)

0 to 9

Press B

Press C

· If you do not perform any button operation for about two or three minutes

while the cursor is on the display, the watch automatically returns to the

normal data display (the cursor disappears).

Cursor

Text area

Number area

)

(

Press C

Press B

(space)

(Japanese)

0 to 9

(Alphabet)

A to Z

1633/1814-5

TIME TEL SCH VIT ALM STW

BATT

AUTO DISPLAY FUNCTION

The Auto Display function continually changes the

contents of the text area of the display. Note that

you cannot use any of the watch's other functions

(except for turning on the backlight) while the Auto

Display function is operating.

To turn the Auto Display off

Hold down M for about three seconds until the

watch beeps.

To turn Auto Display on

Hold down M for about three seconds until the watch beeps.

Note

The Auto Display function cannot be performed while you are making settings

(i.e. while digits or other settings are flashing on the display).

ABOUT THE LOW BATTERY WARNING

The message BATT flashes on the display

whenever the battery power is low. Have the

battery of the watch replaced as soon as possible

after this message appears. Using the watch while

the battery is low can result in abnormal operation.

Important!

· In order to protect data stored in memory, you will not be able to recall

existing data or input new data while the BATT message is flashing on the

display. Also, the alarm, hourly time signal, backlight, and other functions

do not operate.

· Low battery power can cause time keeping to fall behind, and it can cause

the display to become difficult to read, or to clear completely.

ALWAYS LEAVE BATTERY REPLACEMENT UP TO THE DEALER

WHERE YOU BOUGHT THE WATCH OR TO AN AUTHORIZED CASIO

DISTRIBUTOR. BE SURE TO SHOW THE FOLLOWING INFORMATION

TO THE PERSON REPLACING THE BATTERY.

Attention dealer or CASIO distributor

Be sure to use the following procedure when replacing the battery.

1. Open and remove the back cover.

· If CLOSE appears on the display when you open the back cover, replace

the back cover. Wait for a few minutes and try again.

2. Remove the battery holder.

3. Remove the old battery and load a new one.

4. Replace the battery holder.

5. Touch the AC contact and the battery (+) side with metallic tweezers.

6. Close the back cover.

· The message WAIT appears on the display about 15 seconds after you

perform the AC (all clear) operation in step 5 of the above procedure,

indicating that the watch is performing an internal self-check for data errors.

· The WAIT indicator remains on the display for a few minutes while the

watch performs an internal check of data in memory. Though you can

change the time setting of the watch while the WAIT indicator is on the

display, other operations are disabled.

TIME TEL SCH VIT ALM STW

(

)

(space)

CHARACTER LIST