CANON PS-NX90 - Service Manual Immediate Download

ColorPASS-Z90/60

PS-NX90/60

REVISION 0

MAR.2000

ColorPASS-Z90/60 REV.0 MAR. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)

FY8-13GG-000

IMPORTANT

THE INFORMATION CONTAINED HEREIN IS PUBLISHED BY CANON, INC., JAPAN.

SPECIFICATIONS AND OTHER INFORMATION CONTAINED HEREIN MAY DIFFER

SLIGHTLY FROM ACTUAL MACHINE VALUES OR THOSE FOUND IN ADVERTISING AND

OTHER PRINTED MATTER.

ANY QUESTIONS REGARDING INFORMATION CONTAINED HEREIN SHOULD BE

DIRECTED TO THE COPIER SERVICE DEPARTMENT OF THE SALES COMPANY.

ColorPASS-Z90/60 REV.0 MAR. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)

Printed in Japan

Imprimé au Japon

CAUTION

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

This Service Manual provides basic facts and figures needed in the field when servicing

the ColorPASS/PS-NX, and consists of the following chapters:

Chapter 1, General Description introduces the ColorPASS/PS-NX's features and provides

an outline of operation.

Chapter 2, Preparing for Installation discusses things to do before stating the installation

work.

Chapter 3, Installation shows how to install the ColorPASS/PS-NX, and provides an out-

line of its control panel.

Chapter 4,Image Disassembly/Assembly shows how to disassemble and assemble the

ColorPASS/PS-NX.

Chapter 5,Troubleshooting provides tables of typical problems and actions to take with a

list of error messages.

Chapter 6, Parts Catalog contains diagrams of parts and parts names.

Appendix contains a table of specifications and a list of tools.

In addition to this manual, the ColorPASS/PS-NX comes with the Getting Started, Job

Management Guide, Printing Guide, Configuration Guide, Color Guide for use by the user.

All service persons are encouraged to read these documents at least once to find out how the

ColorPASS/PS-NX may be set up by making various optional settings.

The ColorPASS/PS-NX is a maintenance-/inspection-free product.

The description in this Service Manual are subject to change without notice for product

improvement or other reasons, and major changes will be communicated in the form of Ser-

vice Information bulletins.

All service persons are expected to have a good understanding of the contents of this Ser-

vice Manual and all relevant Service Information bulletins and be able to identify and isolate

faults in the machine.

The following are the trademarks or registered trademarks of the respective entities:

EFI and Fiery is a registered trademark of Electronics for Imaging, Inc.

PostScript is a registered trademark of Adobe Systems Incorporated.

EPS (Encapsulated PostScript) is a registered trademark of Altsys Corporation.

Apple, AppleTalk, EtherTalk, TrueType and Macintosh are registered trademarks of Apple

Computer, Inc.

Windows is a registered trademark of Microsoft Corporation.

NetWare, Novell, and Internetwork Packet Exchange (IPX) are registered trademarks of

Novell, Inc.

Introduction

Pentium, Pentium III are registered trademarks of Intel Corporation.

UNIX is a registered trademark of System Laboratories.

All brand names and product names used in this Service Manual are trademarks, regis-

tered trademarks, or trade names of their respective holders.

iii

Contents

CHAPTER 1 INTRODUCTION

Outline .......................................... 2-1

Checking the Customer Site ......... 2-3

2.1

Copier Model ........................ 2-3

2.2

Power .................................... 2-3

2.3

Network ................................ 2-4

2.4

System Contact Person ......... 2-4

Features ........................................ 1-1

Outline of Operation ..................... 1-2

2.1

Outline .................................. 1-2

CHAPTER 2 PREPARING FOR INSTALLATION

2.2

Operation .............................. 1-2

2.3

Print Options ......................... 1-3

User Software ............................... 1-4

2.5

Setting Customer

Expectations .......................... 2-4

Unpacking the ColorPASS ........... 2-5

3.1

To Unpack the ColorPASS ... 2-5

3.2

ColorPASS Panels ................. 2-7

Installation .................................... 3-1

1.1

Preliminary Checkout ........... 3-1

1.1.1

To Connect Power and

Start the ColorPASS ...... 3-1

1.2

Connecting to the Copier ...... 3-3

1.2.1

To Connect the ColorPASS

to the Copier .................. 3-3

1.3

Verifying the Connection ...... 3-4

1.3.1

Printing the ColorPASS

Test Page and

Configuration Page ........ 3-4

1.3.2

Checking Scanning and

Printing .......................... 3-7

1.4

Installing Additional

Options .................................. 3-8

1.5

Connecting to the Network ... 3-8

1.5.1

To Connect a Twisted

Pair Cable to the

ColorPASS .................... 3-9

Control Panel .............................. 3-10

2.1

Using the Control Panel ...... 3-10

2.1.1

Activity Light .............. 3-11

2.1.2

Buttons ........................ 3-11

2.2

Control Panel Screens and

Icons .................................... 3-12

2.3

Functions Menu .................. 3-14

Shutting Down and Restarting the

ColorPASS .................................. 3-16

3.1

To Shut Down the

ColorPASS .......................... 3-16

3.2

To Restart the ColorPASS ... 3-16

CHAPTER 3 INSTALLATION