CANON MPC50 - Service Manual Immediate Download

CANON MultiPASS C50 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)

REVISION 0

HY8-10AH-000

FEB. 1998

H12-1033

230V

H12-1034

230V

H12-1035

230V GER

H12-1037

230V

FRN

H12-1038

230V

AUS

H12-1039

230V

MultiPASS C50

HANDSET KIT

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,

maintenance, and repair of products. This manual covers all localities where the products are sold. For this

reason, there may be information in this manual that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to improvements or changes in

products. When changes occur in applicable products or in the content of this manual, Canon will release

technical information as the need arises. In the event of major changes in the contents of this manual over a long

or short period, Canon will issue a new editions of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the individual

companies.

reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc..

CANON INC.

Office Imaging Products Technical Support Dept. 2

5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-0023, Japan

DTP System

This manual was produced on an Apple Macintosh® personal computer, final pages were printed on Canon

SUPER LASER SHOT B406 PS.

All graphics were produced with Macromedia FreeHand®.

All documents and all page layouts were created with QuarkXPress®.

I. MEANING OF MARKS

The marks used in this manual have the following meanings.

Mark

Meaning

States a precaution to be taken to prevent danger to personnel, damage to the product, or

damage to electronic components by discharge of static electricity. for example.

States a precaution to be taken to prevent damage to electronic components by

electrostatic discharge.

Informs you of fire-related cautions.

Informs you that the plug must be removed from the power outlet before starting an

operation.

Gives useful information to understand descriptions.

Indicates sections to be read to obtain more detailed information.

NOTE

REFERENCE

II. ABOUT THIS MANUAL

This manual is divided into five parts, and contains information required for servicing the product.

Part 1: Facsimile

This section describes the facsimile function of the respective product.

Part 2: Printer

This section describes the printer function of the respective product.

Each of the above parts is further divided into the following four chapters:

Chapter 1: General Description

This part explains product specifications and the how to service the unit safely. It is very important, so

please read it.

Chapter 2: Technical Reference

This part explains the technical theory of the product.

Chapter 3: Maintenance and Service

This part explains how to maintain the products for adjustment and troubleshooting and service

operations and service switches.

Chapter 4: Appendix

This part explains the informations of the optional products and user data flow.

· For more details of user operations and user reports, see the separate volume of USER'S

GUIDE.

· Procedure for assembly/disassembly and greasing points are not given in this manual.

See the illustrations in the separate volume of PARTS CATALOG.

· Detailed description of each SSSW/parameter is not given in this manual except the new

SSSWs/parameters added to this model.

See G3 Facsimile Service Data Handbook (supplied separately) for details them.

· See the G3 Facsimile Error Code List (Rev.1, supplied separately) for details of the

error codes not shown in this manual.

· Detailed description of connector Locations and Signal Descriptions in not given in this

manual.

See the Circuit Diagram for details them.

REFERENCE

III. REVISION HISTORY

REVISION

CONTENT

Original

III