FP B45
FP B40
SERVICE
MANUAL
Canon
HY8-19B5-000
COPYRIGHT © 2003 CANON INC.
FAXPHONE B45/B40 APRIL. 2003 PRINTED IN JAPAN (IMPRIME AU JAPON)
FAXPHONEB45
H12-2642
120V USA
FAXPHONEB40
H12-2622
120V CND
FAXPHONEB40
H12-2616
120V LTN
APRIL. 2003
FAXPHONE B45/B40
SERVICE
MANUAL
REVISION 0
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance,
and repair of products. This manual covers all localities where the products are sold.
For this reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the content of this manual,
Canon will release technical information as the need arises.
In the event of major changes in the contents of this manual ,
Canon will issue a new editions of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local law.
Trademarks
The product names and company names described in this manual are the registered trademarks of the individual
companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied,
reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
Copyright © 2003 by Canon Inc.
CANON INC.
Consumer Imaging Products Quality Assurance Dept. 1
5-1 Hakusan 7-Chome,Toride-city, Ibaraki 302-8501, Japan
DTP System
This manual was produced on aWindows 2000®,
All graphics were produced with Adobe Illustrator 9.0J®.
All documents and all page layouts were created with Adobe PageMaker 7.0®.
I
I. MEANING OF MARKS
The marks used in this manual have the following meanings.
Mark
Meaning
States a precaution to be taken to prevent danger to personnel, damage to the
product, or damage to electronic components by discharge of static electricity.
for example.
States a precaution to be taken to prevent damage to electronic components by
electrostatic discharge.
If the following mark is used, follow the directions given.
Informs you of fire-related cautions.
Informs you that the plug must be removed from the power outlet before starting
an operation.
Gives useful information to understand descriptions.
Indicates sections to be read to obtain more detailed information.
NOTE
REFERENCE
II
II. ABOUT THIS MANUAL
This manual is divided into five parts, and contains information required for servicing the product.
Each of the above parts is further divided into the following four chapters:
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely. It is very
important, so please read it.
Chapter 2: Technical Reference
This part explains the technical theory the product.
Chapter 3: Disassembly
This part explains the assembly and disassembly of the product.
Chapter 4: Maintenance and Service
This part explains how to maintain the products for troubleshooting and service operations and
service switches.
Chapter 5: Parts catalog
This part explains the parts catalog
Chapter 6: Appendix
This part explains the installation
· For more details of user operations and user reports, see the separate volume of
USER'S GUIDE.
· Detailed description of each SSSW/parameter is not given in this manual except
the new SSSWs/parameters added to this model.
See G3 Facsimile Service Data Handbook (supplied separately) for details them.
· See the G3/G4 Facsimile Error Code List (Rev.2, supplied separately)
for details of the error codes not shown in this manual.
REFERENCE