FAXPHONE B95
SERVICE
MANUAL
Canon
Copyright 2004, Canon U.S.A. This technical publication is the proprietary and confidential information of Canon U.S.A. which
shall be retained for reference purposes by Authorized Service Facilities of Canon U.S.A. Its unauthorized use is prohibited.
FAXPHONE B95
Service Manual
REVISION 0
HY8-10B0-000
COPYRIGHT 2004 CANON INC. FAXPHONE B95 AUGUST. 2004
Scope
This manual has been issued by Canon Inc., to provide the service technicians of this product with the
information necessary for qualified persons to learn technical theory, installation, maintenance, and repair of
products. The manual covers information applicable in all regions where the product is sold. For this reason, it
may contain information that is not applicable to your region.
Revision
This manual could include technical inaccuracies or typographical errors due to improvements or changes made
to the product. When changes are made to the contents of the manual, Canon will release technical information
when necessary. When substantial changes are made to the contents of the manual, Canon will issue a revised
edition.
The following do not apply if they do not conform to the laws and regulations of the region where the manual or
product is used
Trademarks
Product and brand names appearing in this manual are registered trademarks or trademarks of the respective
holders.
Copyright
All right reserved. No part of this manual may be reproduced in any form or by any means or translated into
another language without the written permission of Canon Inc., except in the case of internal business use.
Copyright 2004 by Canon Inc.
CANON INC.
5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan
I. MANUAL OUTLINE
This manual is divided into three parts, and contains information required for servicing the product.
Part 1: Maintenance
Information on maintenance and troubleshooting of the product.
Part 2: Technical Reference
New technology and technical information of the product.
Part 3: Appendix
Schematic and Specifications.
Reference
This manual does not provide sufficient information of disassembly and reassembly procedures. Refer to the
graphics in the separate Parts Catalog.
II. Table of Contents
Page
Part 1: Maintenance
1 - 1
1.
Maintenance
1 - 1
1.1 Adjustment, Periodic Replacement Parts, Periodic Maintenance, Replacement of
Consumables by Service Engineer
1 - 1
1.2 Customer Maintenance
1 - 2
1.3 Product Life
1 - 2
1.4 Special Tools
1 - 2
2. LIST OF ERROR DISPLAY
1 - 2
2.1 Troubleshooting Index
1 - 3
2.2 Errors shown on display (judgment criterion: check diplay)
1 - 5
2.3 Errors not shown on display
1 - 9
3. Repair
1 - 9
3.1 Caution when replacing service parts
1 - 23
3.2 Service Switches
1 30
3.3 Explanation of service data
1 - 38
3.4 Test Function
Page
Part 2: Technical Reference
2 - 1
1. New Technology
Page
Part 3: Appendix
3 - 1
1. Schematic
3 - 2
2. Specifications