REVISION 1
COPYRIGHT © 1999 CANON INC.
CANON FAX-L260i JUNE 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
HY8-10AK-010
JUNE 1999
FAX-L260i
H12-1413
EC
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products are sold. For this
reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements or changes in products.
When changes occur in applicable products or in the content of this manual, Canon will release technical information
as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon
will issue a new editions of this manual.
The following paragraph does not apply to any countries where such provisions are inconsistent with local
law.
Trademarks
The product names and company names described in this manual are the registered trademarks of the individual
companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be copied,
reproduced or translated into another language, in whole or in part, without the written consent of Canon Inc.
Copyright © 1999 by Canon Inc.
CANON INC.
Office Imaging Products Technical Support Dept. 3
5-1 Hakusan 7-Chome, Toride-city, Ibaraki 302-8501, Japan
DTP System
This manual was produced on an Apple Macintosh®, personal computer, final pages were printed on AGFA
SelectSet Avantra 25.
All graphics were produced with MACRO MEDIA FREEHAND 8.0J®
All documents and all page layouts were created with ADOBE Page Maker 6.5J®
I
I. MEANINGS OF MARKS
The marks used in this manual have the following meanings.
Mark
Meaning
States a precaution to be taken to prevent danger to personnel, damage to
the product, or damage to electronic components by discharge of static
electricity. for example.
States a precaution to be taken to prevent damage to electronic compo-
nents by electrostatic discharge.
Informs you of fire-related cautions.
Informs you that the plug must be removed from the power outlet before
starting an operation.
Gives useful information to understand descriptions.
Indicates sections to be read to obtain more detailed information.
NOTE
REFERENCE
II
II. ABOUT THIS MANUAL
This manual is divided into four parts, and contains information required for servicing the
product.
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely.
Chapter 2: Technical Reference
This part explains the technical theory of the product.
Chapter 3: Maintenance and Service
This part explains how to maintain the products for service operations, troubleshooting
and service switches.
Chapter 4: Appendix
This part explains the information of the installation, optional products and user data
flow.
· For more details of user operations and user reports, see the seperate vol-
ume of USER'S GUIDE.
· Procedure for assembly/disassembly and greasing points are not given in
this manual. See the illustrations in the separate volume of PARTS CATA-
LOG.
· Dtailed description of each SSSW/parameter is not given in this manual
except the new SSSWs/parameters added to this model.
See G3 Facsimile Service Data Handbook (supplied separately) for
details them.
· See the G3 Facsimile Error Code List (Rev.1, supplied separately)
for details of the error codes not shown in this manual.
Details regarding D-channel error codes and B-channel error codes are
mentioned in this manual.
· Detailed description of connector Locations and Signal Descriptions in not
given in this manual.
See the Circuit Diagram for details them.
REFERENCE
III
III. REVISION HISTORY
REVISION
CONTENT
0
Original
1
Updates to Service Information HS-E5E-9015-01, as issual
by Canon Inc.