MultiPASS C5000
SERVICE
MANUAL
Canon
Application
This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation,
maintenance, and repair of products. This manual covers all localities where the products
sold. For this
reason, there may be information in this manual that does not apply to your locality.
Corrections
This manual may contain technical inaccuracies
typographical errors due to improvements
changes in
products. When changes occur in applicable products or in the content of this manual, Canon will release
technical information as the need arises. In the event of major
in the contents of this manual
long
short period, Canon will issue
new editions of this manual.
The following paragraph does not apply to any countries where such provisions are
inconsistent with local law.
Trademarks
The product
and company names described in this manual are the registered trademarks of the
individual companies.
Copyright
This manual is copyrighted with all rights reserved. Under the copyright laws, this manual may not be
copied, reproduced
translated into another language, in whole
in part, without the written consent of
Canon Inc..
Copyright
1997 by Canon Inc.
CANON INC.
Office Imaging Products Technical Support Dept. 2
Hakusan
Toridecity, lbaraki 302, Japan
DTP
System
This
was
on
Apple Macintosh" personal computer, final pages
printed on Canon
SUPER LASER SHOT
PS.
All graphics
produced with Macromedia
All
and all page layouts
created with
The marks used in this manual have the following meanings
A
A
NOTE
REFERENCE
Meaning
States a precaution to be taken to prevent danger to personnel, damage to
the product, or damage to electronic components by discharge of static
electricity. for example.
States a precaution to be taken to prevent damage to electronic components
by electrostatic discharge.
Informs you of fire-related cautions.
Informs you that the plug must be
from the power outlet before
starting an operation.
Gives useful information to understand descriptions.
Indicates sections to be read to obtain
detailed information.
This manual is divided into
parts, and contains information required for servicing the
product.
1: Facsimile
This section describes the facsimile function of the respective product.
Part
2: Printer
This section describes the printer function of the respective product.
Each of the above parts is further divided into the following four chapters:
Chapter 1: General Description
This part explains product specifications and the how to service the unit safely. It is very
important, so please read it.
Chapter 2: Technical Reference
This part explains the technical theory of the product
Chapter 3: Maintenance and Service
This part explains how to maintain the products for adjustment and troubleshooting and
service operations and service switches.
Chapter 4: Appendix
This part
the informations of the optional products and user data flow.
l
For more details of
operations and
reports, see the separate volume
of USER'S
l
Procedure for assembly/disassembly and greasing points are not given in this
REFERENCE
manual. See the illustrations in the separate volume of PARTS CATALOG.
l
Detailed description of each
is not given in this manual
except the new
added to this model.
See G3 Facsimile Service Data Handbook (supplied separately) for details
l
See the G3 Facsimile Error Code
(Rev.
supplied separate/y)
for details of
the error codes not shown in this
l
Detailed description of connector Locations and Signal Descriptions in not
given in this manual.
See the Circuit Diagram for details
REVISION
CONTENT
0
Original