WARNING
To prevent fire or shock hazard, do not
expose this appliance to rain or moisture.
Operator's Manual
MIDI STEREO
DIGITAL SAMPLER
s3200xl
The lightning flash with the arrowhead symbol superimposed across a graphical
representation of a person, within an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage" within the product's enclosure;
that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intented to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THE SYMBOLS ARE RULED BY UL STANDARDS (U.S.A.)
5A-En
WARNING!!
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
1-En
S3200XL Operator's Manual - Version 1.00
i
WARNING
The S3200XL is designed to be used in a standard household environment.
Power requirements for electrical equipment vary from area to area. Please ensure that your
S3200XL meets the power requirements in your area. If in doubt, consult a qualified electrician
or Akai Professional dealer.
120 VAC
@ 60 Hz for USA and Canada
220~230/240 VAC
@ 50 Hz for Europe
240 VAC
@ 50 Hz for Australia
PROTECTING YOURSELF AND THE S3200XL
· Never touch the AC plug with wet hands.
· Always disconnect the S3200XL from the power supply by pulling on the plug, not the cord.
· Allow only an Akai Professional dealer or qualified professional engineer to repair or reassemble
the S3200XL. Apart from voiding the warranty, unauthorized engineers might touch live internal
parts and receive a serious electrical shock.
· Do not put, or allow anyone to put any object, especially metal objects, into the S3200XL.
· Use only a household AC power supply. Never use a DC power supply.
· If water or any other liquid is spilled into or onto the S3200XL, disconnect the power, and call
your dealer.
· Make sure that the unit is well-ventilated, and away from direct sunlight.
· To avoid damage to internal circuitry, as well as the external finish, keep the S3200XL away from
sources of direct heat (stoves, radiators, etc.).
· Avoid using aerosol insecticides, etc. near the S3200XL. They may damage the surface, and
may ignite.
· Do not use denaturated alcohol, thinner or similar chemicals to clean the S3200XL. They will
damage the finish.
· Modification of this equipment is dangerous, and can result in the functions of the S3200XL
being impaired. Never attempt to modify the equipment in any way.
· Make sure that the S3200XL is always well-supported when in use (either in a specially-
designed equipment rack, or a firm level surface).
· When installing the S3200XL in a 19" rack system, always allow 1U of ventilated free space
above it to allow for cooling. Make sure that the back of the rack is unobstructed to allow a clear
airflow.
· In order to assure optimum performance of your S3200XL, select the setup location carefully,
and make sure the equipment is used properly. Avoid setting up the S3200XL in the following
locations:
1. In a humid or dusty environment
2. In a room with poor ventilation
3. On a surface which is not horizontal
4. Inside a vehicle such as a car, where it will be subject to vibration
5. In an extremely hot or cold environment
WARNING