AIWA XR-M200 - Owner's Manual Immediate Download

COMPACT DISC STEREO SYSTEM

SISTEMA ESTEREO CON REPRODUCTOR DE DISCOS COMPACTOS

CHAINE STEREO AVEC LECTEUR DE DISQUES COMPACTS

XR-M200

OPERATING INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MODE D'EMPLOI

En (English)

E (Español)

8A-CL8-901-01

991020AWW-X6

F (Français)

For assistance and information,

call toll free 1-800-BUY-AIWA.

(United States and Puerto Rico)

00COVER/XR-M200/ESF

10/4/2000, 6:01 PM

1 ENGLISH

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

"CAUTION:TO REDUCE THE RISK OF

ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL."

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Explanation of Graphical Symbols:

The lightning flash with arrowhead symbol, within

an equilateral triangle, is intended to alert the

user to the presence of uninsulated "dangerous

voltage" within the product's enclosure that may

be of sufficient magnitude to constitute a risk of

electric shock to persons.

The exclamation point within an equilateral

triangle is intended to alert the user to the

presence

important

operating

and

maintenance (servicing) instructions in the

literature accompanying the appliance.

ENGLISH

7 Condensation -- Moisture may form on the CD pickup lens

when:

- The unit is moved from a cold spot to a warm spot

- The heating system has just been turned on

- The unit is used in a very humid room

- The unit is cooled by an air conditioner

When this unit has condensation inside, it may not function

normally. Should this occur, leave the unit for a few hours, then

try to operate again.

8 Wall or ceiling mounting -- The unit should not be mounted

on a wall or ceiling, unless specified in the Operating Instruc-

tions.

Electric Power

1 Power sources -- Connect this unit only to power sources

specified in the Operating Instructions, and as marked on the

unit.

2 Polarization -- As a safety feature, some units are equipped

with polarized AC power plugs which can only be inserted

one way into a power outlet. If it is difficult or impossible to

insert the AC power plug into an outlet, turn the plug over and

try again. If it still does not easily insert into the outlet, please

call a qualified service technician to service or replace the

outlet. To avoid defeating the safety feature of the polarized

plug, do not force it into a power outlet.

3 AC power cord

- When disconnecting the AC power cord, pull out by the AC

power plug. Do not pull the cord itself.

- Never handle the AC power plug with wet hands, as this

could result in fire or shock.

- Power cord should be routed to avoid being severely bent,

pinched, or walked upon. Pay particular attention to the cord

from the unit to the power socket.

- Avoid overloading AC power plugs and extension cords

beyond their capacity, as this could result in fire or shock.

4 Extension cord -- To help prevent electric shock, do not use a

polarized AC power plug with an extension cord, receptacle, or

other outlet unless the polarized plug can be completely inserted

to prevent exposure of the blades of the plug.

5 When not in use -- Unplug the AC power plug from the power

socket if the unit will not be used for several months or more.

When the cord is plugged in, a small amount of current continues

to flow to the unit, even when the power is turned off.

Outdoor Antenna

1 Power lines -- When connecting an outdoor antenna, make

sure it is located away from power lines.

2 Outdoor antenna grounding -- Be sure the antenna system

is properly grounded to provide protection against unexpected

voltage surges or static electricity build-up. Article 810 of the

National Electrical Code, ANSI/NFPA 70, provides information

on proper grounding of the mast, supporting structure, and

the lead-in wire to the antenna discharge unit, as well as the

size of the grounding unit, connection to grounding terminals,

and requirements for grounding terminals.

PRECAUTIONS

Read the Operating Instructions carefully and completely before

operating the unit. Be sure to keep the Operating Instructions for

future reference. All warnings and cautions in the Operating In-

structions and on the unit should be strictly followed, as well as

the safety suggestions below.

Installation

1 Water and moisture -- Do not use this unit near water, such

as near a bathtub, washbowl, swimming pool, or the like.

2 Heat -- Do not use this unit near sources of heat, including

heating vents, stoves, or other appliances that generate heat.

It also should not be placed in temperatures less than 5°C

(41°F) or greater than 35°C (95°F).

3 Mounting surface -- Place the unit on a flat, even surface.

4 Ventilation -- The unit should be situated with adequate

space around it so that proper heat ventilation is assured.

Allow 10 cm (4 in.) clearance from the rear and the top of the

unit, and 5 cm (2 in.) from the each side.

- Do not place the unit on a bed, rug, or similar surface that

may block the ventilation openings.

- Do not install the unit in a bookcase, cabinet, or airtight

rack where ventilation may be impeded.

5 Objects and liquid entry -- Take care that objects or liquids

do not get inside the unit through the ventilation openings.

6 Carts and stands -- When

placed or mounted on a stand or

cart, the unit should be moved

with care.

Quick stops, excessive force, and

uneven surfaces may cause the

unit or cart to overturn or fall.

01-04/XR-M200/Eng

10/4/2000, 6:01 PM

ENGLISH

TABLE OF CONTENTS

PRECAUTIONS ................................................................... 1

PREPARATIONS

CONNECTIONS ................................................................. 3

REMOTE CONTROL ........................................................... 4

BEFORE OPERATION ........................................................ 5

SOUND

AUDIO ADJUSTMENTS .................................................... 6

GRAPHIC EQUALIZER ....................................................... 6

RADIO RECEPTION

MANUAL TUNING ............................................................... 7

PRESETTING STATIONS ................................................... 7

CD PLAYING

BASIC OPERATIONS ........................................................ 8

PROGRAMMED PLAY ........................................................ 9

TAPE PLAYBACK

BASIC OPERATIONS ...................................................... 10

RECORDING

BASIC RECORDING ........................................................ 11

AI EDIT RECORDING ...................................................... 12

PROGRAMMED EDIT RECORDING ............................... 13

CLOCK AND TIMER

SETTING THE CLOCK ..................................................... 14

SETTING THE SLEEP TIMER ......................................... 14

SETTING THE TIMER ...................................................... 15

OTHER CONNECTIONS

CONNECTING OPTIONAL EQUIPMENT ....................... 16

LISTENING TO EXTERNAL SOURCES ......................... 16

GENERAL

CARE AND MAINTENANCE ........................................... 17

TROUBLESHOOTING GUIDE ......................................... 17

SPECIFICATIONS ............................................................ 18

PARTS INDEX ...................................................

Back cover

Maintenance

Clean the unit only as recommended in the Operating Instruc-

tions.

Damage Requiring Service

Have the units serviced by a qualified service technician if:

- The AC power cord or plug has been damaged

- Foreign objects or liquid have gotten inside the unit

- The unit has been exposed to rain or water

- The unit does not seem to operate normally

- The unit exhibits a marked change in performance

- The unit has been dropped, or the cabinet has been damaged

DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.

Owner's record

For your convenience, record the model number and serial

number (you will find them on the rear of your set) in the space

provided below. Please refer to them when you contact your Aiwa

dealer in case of difficulty.

Model No.

Serial No. (Lot No.)

XR-M200 U

Check your system and accessories

XR-M200 Compact disc

stereo cassette receiver

Front speakers

Remote control

FM antenna

AM antenna

Operating Instructions, etc.

01-04/XR-M200/Eng

10/4/2000, 6:01 PM

3 ENGLISH

CONNECTIONS

PREPARATIONS

Before connecting the AC cord

The rated voltage of your unit shown on the rear panel is 120 V

AC. Check that the rated voltage matches your local voltage.

IMPORTANT

· Connect the speakers, antennas, and all optional equipment

first. Then connect the AC cord.

· Both speakers can be connected as L (Left) or R (Right).

1 Connect the right speaker to the main unit.

1 Connect the speaker cord with the plug to the SPEAKERS

HIGH FREQ R terminal.

2 Connect the speaker cord with the white stripe to the

SPEAKERS LOW FREQ R 0terminal and the black cord

to the 9 terminal.

2 Connect the left speaker to the main unit.

Connect the speaker cord with plug to the SPEAKERS HIGH

FREQ L terminal, and another speaker cord to the

SPEAKERS LOW FREQ L terminals in the same manner as

step 1.

3 Connect the supplied antennas.

Connect the FM antenna to FM 75

terminals and the AM

antenna to AM LOOP terminals.

AM LOOP antenna

FM antenna

4 Connect the AC cord to an AC outlet.

FM antenna

AM antenna

Right speaker

Left speaker

XR-M200

Speaker cord

AC cord

Speaker cord

01-04/XR-M200/Eng

10/4/2000, 6:01 PM

ENGLISH

PREPARATIONS

To stand the AM loop antenna on a surface

Fix the claw to the slot.

To position the antennas

FM feeder antenna:

Extend this antenna horizontally in a T-shape and fix its ends to

the wall.

AM loop antenna:

Position for the best reception.

· Be sure to connect the speaker cords correctly. Improper

connections can cause short circuits in SPEAKERS terminals.

· Do not leave objects generating magnetism, such as credit

cards, near the speakers, as these objects may be damaged.

· Do not bring the FM antenna near metal objects or curtain rails.

· Do not bring the AM antenna near other optional equipment,

the stereo system itself, the AC cord or speaker cords, since

noise will be picked up.

· Do not unwind the AM antenna wire.

CONNECTING AN OUTDOOR ANTENNA

For better FM reception, use of an outdoor antenna is

recommended.

Connect the outdoor antenna to FM 75

terminals.

REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two size AA (R6) batteries.

AA (R6)

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the main unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with new ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the

main unit. Buttons on the remote control with the same names

as those on the main unit can be used as well.

To use FUNCTION on the remote control

The FUNCTION substitutes for the function buttons (TAPE,

TUNER, VIDEO/AUX, CD, MD) on the main unit.

Each time FUNCTION is pressed while power is on, the next

function is selected cyclically.

c PLAY on the remote control

The function is the same as that of d on the main unit.

c PLAY

FUNCTION

· If the remote control is not going to be used for an extended

period of time, remove the batteries to prevent possible

electrolyte leakage.

· The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor beside the VOLUME control is exposed to intense light,

such as direct sunlight

- Other remote controls are used nearby (those of a television,

etc.)

01-04/XR-M200/Eng

10/4/2000, 6:01 PM