AIWA XP-ER800N - Owner's Manual Immediate Download

WARNING

To prevent fire or shock hazard, do not expose the unit to

rain or moisture.

Do not install the appliance in a confined space, such as

a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the

apparatus with newspapers, tablecloths, curtains, etc. And

don't place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled

with liquids, such as vases, on the apparatus.

CAUTION

The use of optical instruments with this product will

increase eye hazard.

Certain countries may regulate disposal of the battery used

to power this product. Please consult with your local

authority.

CAUTION

· INVISIBLE LASER RADIATION WHEN OPEN

· DO NOT STARE INTO BEAM OR VIEW DIRECTLY

WITH OPTICAL INSTRUMENT

The validity of the CE marking is restricted to only those

countries where it is legally enforced, mainly in the

countries EEA (European Economic Area).

Owner's Record

The model number and the serial number are located at the

rear of the CD player. Record the serial number in the

space provided below. Refer to these numbers whenever

you call upon your Aiwa dealer regarding this product.

Model No. XP-ER800N

Serial No.

For the customers in the USA

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

Declaration of Conformity

Trade Name:

AIWA

Model No.:

XP-ER800N

Responsible Party: Sony Electronics Inc.

Address:

680 Kinderkamack Road,

Oradell, NJ 07649

USA

Telephone No.:

201-930-6973

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Power Sources

To use the batteries (B)

Use only the following batteries for your CD player:

Dry batteries

· LR6 (size AA) alkaline batteries (not supplied)

Rechargeable batteries

Charge the rechargeable batteries before using them for

the first time.

· Commercially-available size AA Ni-MH rechargeable

batteries of 1.2 V DC, 700 mAh

To insert the batteries

1 Open the battery compartment lid on the rear of your CD

player.

2 Insert two batteries by matching the ) to the diagram

in the battery compartment and close the lid until it

clicks into place.

3 When using the rechargeable batteries, connect the

commercially-available AC power adaptor to the DC

IN 4.5V jack of your CD player and an AC outlet,

then press

s/OFF/CHARGE while the CD player is

turned off to start charging.

The CD player charges the batteries. The "CHG"

indicator turns on in the display and the the indicator

sections of

light up in succession. When the

batteries are completely charged, the "CHG" and

indicators get turned off.

If you press

s/OFF/CHARGE after the charge has

already been completed, the

indicator flashes

and "Full" appears in the display.

4 Disconnect the AC power adaptor.

Label side up

3-252-981-21 (1)

CD player (front)

to an AC outlet

DC IN 4.5 V

(external power

input) jack

Insert the ( end first (for both batteries).

AC power

adaptor

Headphones

Open the battery compartment lid.

*The button has a tactile dot.

Strap holes

4SOUND

Display

8r/t

SKIP/SEARCH

0MODE

DC IN

4.5V

\ (headphones)

jack

!HOLD

@VOL +*/

9ca*

567 s(stop)/OFF/CHARGE

Display

3BAND

Battery life* (approx. hours)

(When the CD player is used on a flat and stable place.)

Playing time varies depending on how the CD player is used.

E·A·S·S

Radio

Two Sony alkaline

batteries LR6 (SG)

(produced in Japan)

* Measured value by the standard of JEITA (Japan

Electronics and Information Technology Industries

Association).

To check the remaining power of the

batteries

You can check it in the display.

Replace the batteries when "

" flashes.

Lo batt*

* Beep sounds.

Notes

· The indicator sections of

roughly shows the

remaining battery power. One section does not always

indicate one-fourth of the battery power.

· Depending on operating conditions, the indicator

sections of

may increase or decrease.

Notes on using the dry batteries

· Be sure to remove the AC power adaptor.

· When the batteries are depleted, replace both batteries

with new ones.

Notes on the rechargeable batteries

· To keep the original battery capacity for a long time,

charge the batteries only when they are completely

depleted.

· If the battery is new or has not been used for a long

time, it may not be charged completely until you charge

and discharge it several times.

· When carrying the rechargeable batteries, use the

battery carrying case supplied with the rechargeable

batteries to prevent unexpected heat. If the rechargeable

batteries and the metallic objects get contacted, heat or

fire may occur due to a short circuit.

When to replace the rechargeable

batteries

If the battery life becomes shorter by about half, replace

the batteries with new rechargeable batteries.

To use the AC power adaptor (C)

1 Connect the commercially-available AC power

adaptor whose rated output is 4.5 V DC, 500 mA, to

an AC outlet.

Playing a CD

To insert a CD

1 Slide OPEN to open the lid (A).

2 Fit the CD to the pivot, then close the lid (D).

Notes

· This CD player can play discs recorded in the Compact

Disc Digital Audio (Audio CD) format.

· This CD player can play CD-Rs/CD-RWs recorded in

the Compact Disc Digital Audio (Audio CD) format,

but playback capability may vary depending on the

quality of the disc and the condition of the recording

device.

· This product is designed to play back discs that conform

to the Compact Disc (CD) standard.

Recently, various music discs encoded with copyright

protection technologies are marketed by some record

companies. Please be aware that among those discs,

there are some that do not conform to the CD standard

and may not be playable by this product.

To operate the CD player

Button/Switch and its Function/Operation

1 ENTER/DISPLAY

Press to check the remaining time on the CD and the

number of tracks left. Also press to enter the selected

track for the PGM play.

2 PRESET CALL UP/DOWN

Press to select the preset station you want.

3 BAND

Press to turn on the radio. Press also to change the

band.

4 SOUND

Use to emphasize the bass-boosted sound. Press

repeatedly to select

enhances more than

5 s(stop)

Press to stop playing.

6 OFF

Press to turn off the radio.

7 CHARGE

Press to start charging.

8 r/t (skip/search)

For CD player: Press

r or t once to find the

beginning of the current/next track.

Press

r or t repeatedly to find the beginning

of the previous/ succeeding tracks.

Press and hold

r or t to go backward/forward

quickly.

For radio: Press to tune in the station you want.

9 ca (play/pause)

Press to start play. Press again to pause play.

To play from the first track, press for 2 seconds or

more while the CD player is stopped.

Button/Switch and its Function/Operation

0 MODE

For CD player: Press repeatedly until the play mode

you want appears in the display.

No indication: Normal play

"1": Single play

"SHUF": Shuffle play

"PGM": PGM (program) play

To repeat the play mode you selected, press and hold

until "

" appears.

For radio: Press until "ST" disappears from the

display to improve the receiving condition on FM.

! HOLD

Use to lock the controls to prevent accidental button

presses.

@ VOL+/

Press to adjust the volume.

* If the sound is distorted when using the SOUND function,

turn down the volume.

To protect against sound skipping

The E·A·S·S function has been developed to provide

excellent protection against sound skipping during many

active uses.

1 Insert a disc and wait until the display goes off.

2 While holding MODE, press ca.

3 Press MODE to select the E·A·S·S mode.

When you select "E·A·S·S", the E·A·S·S function is

enhanced compared to "E·A·S·S

To walk with the CD player and enjoy high quality

CD sound using the E·A·S·S function, select

"E·A·S·S

". While taking harder exercises, it is

recommended that you set it to "E·A·S·S."

4 Press ENTER/DISPLAY.

Note

Sound may skip:

if the CD player receives stronger continuous shock than

expected,

if a dirty or scratched CD is played or

when using poor-quality CD-Rs/CD-RWs or if there is a

problem with the recording device or application software.

Checking the remaining time on the CD

and the number of tracks left

You can check the remaining time on the CD and the

number of racks left using ENTER/DISPLAY.

1 Press ENTER/DISPLAY.

Each time you press the button, the display changes as

follows:

Display

Normal play

Track number and

elapsed playing time

Press ENTER/DISPLAY once.

Track number and

remaining time on the

current track.

Press ENTER/DISPLAY once again.

The number of tracks left

and remaining time on

the CD*

*Not displayed during the Single play and Shuffle play.

To remove the CD

Remove the CD while pressing the pivot.

To turn off the operation beep

sound

You can turn off the beep sound that is heard from your

headphones when you operate your CD player.

1 Remove the power source (AC power adaptor, dry

batteries) from the CD player, and wait for about 3

seconds.

2 Connect the power source while pressing s/OFF/

CHARGE.

To turn on the beep sound

Remove the power source, wait for about 3 seconds, and

then connect the power source without pressing

s/OFF/

CHARGE.

Playing tracks in your

favorite order (PGM play)

You can program the CD player to play up to 24 tracks in

your favorite order.

1 During playback, press MODE repeatedly until

"PGM" flashes.

2 Press r or t to select a track.

3 Press ENTER/DISPLAY to enter the selected track.

"00" appears and the playing order increases

by one.

4 Repeat steps 2 and 3 to select the tracks in your

favorite order.

5 Press and hold ENTER/DISPLAY until the PGM play

starts.

2PRESET CALL UP/DOWN

1ENTER/DISPLAY

OPEN

TV/WB/FM/AM

Portable CD Player

Operating Instructions

XP-ER800N

http://www.aiwa.com/

To check the program

During programming, press ENTER/DISPLAY repeatedly

before step 5. Each time you press ENTER/DISPLAY, the

track number appears.

Note

· When you finish entering the 24th track in step 3, the

first selected track appears in the display.

· During the PGM play, you cannot check the program.

To cancel PGM play

During programming or PGM play, press MODE once so

that "PGM" disappears.

(Continue to the reverse side)

Play mode

Track number/PRESET number

Sound mode

Playing time/

Frequency

PRESET

E·A·S·S

Remaining

battery power

Band

VOL

CHG

Listening to the radio

1 Press BAND to turn on the radio.

2 Press BAND until the band you want appears.

Each time you press the button, the display changes as

follows:

FM AM TV WB

3 Press r or t on the CD player to tune in the

station you want and adjust the volume.

Tuning mode and Preset mode

When the preset number appears in the display, the CD

player is in the preset mode and you can use PRESET

CALL UP/DOWN to select the preset number.

To enter the tuning mode, press

r or t to make the

preset number disappear from the display and to tune in

the station.

To turn off the radio

Press

s/OFF/CHARGE.

Note

During radio reception, the power is turned off

automatically if no operation is made for about 2.5 hours

since the last operation.

To tune in the station quickly

Press and hold

r or t on the CD player in step 3

until the frequency digits begin to change in the display.

The CD player automatically scans the radio frequencies

and stops when it finds a clear station.

To improve broadcast reception

For TV/WB/FM, extend the headphones cord.

Headphones

For AM, reorient the CD player itself.

Note

Keep the headphones connected to the

\ jack of the CD

player. The headphones cord works as the FM/TV/WB

antenna.

If it is hard to hear the FM broadcast

Press MODE until "ST" disappears from the display.

Under the normal conditions, press MODE until "ST"

appears in the display.

Presetting radio stations

automatically

You can preset up to 30 stations in total for FM and AM.

1 Press BAND to turn on the radio.

2 Press and hold ENTER/DISPLAY until searching

starts.

The CD player starts to scan the radio frequencies on

FM and AM, and the received stations are

memorized. "bUSy" appears for about 4 seconds

when all the received stations are memorized or when

30 stations are memorized.

Skipping the tuned station while the

scanning is paused

When a station is tuned in, scanning pauses and the tuned

station is heard for 5 seconds. Press

t to skip the

station while the scanning is paused.

Note

· Stations cannot be stored on TV and WB.

· When broadcast signals are very weak, stations cannot

be preset automatically. Preset them manually.

Presetting radio stations

manually

You can preset up to 30 stations in total for FM and AM.

1 Press BAND to turn on the radio.

2 Press BAND to select the band.

3 Press r or t on the CD player to tune in the

station you want.

4 Press ENTER/DISPLAY. "PRESET" appears in the

display.

To preset another station, repeat steps 3 and 4.

Changing the presetting

1 Press PRESET CALL UP or DOWN to select the

preset number you want to change.

2 Press and hold down ENTER/DISPLAY until the

preset number flashes.

3 While the preset number is flashing, press r or

t to tune in the station you want to memorized on

that preset number.

4 Press ENTER/DISPLAY.

If the flashing stops, repeat from step 2.

Erasing a preset station

Press

s/OFF/CHARGE after step 2 in "Changing the

presetting" above. "bUSy" appears for about 4 seconds,

and the selected preset station is erased from the memory.

The preset number decreased by one for the stored stations

whose preset number are larger than that of the just-erased

station.

Note

· Stations cannot be stored on TV and WB.

· When "P-Full" appears during presetting, you cannot

preset any more stations.

Playing preset radio

stations

1 Press BAND to select the band.

2 Press PRESET CALL UP/DOWN to tune in a stored

station.

Changing the tuning

interval

When using the CD player abroad, change the AM tuning

interval, if necessary.

1 Press s/OFF/CHARGE to turn off the CD player, if

it is turned on.

2 While holding MODE, hold BAND for about 3

seconds.

3 Press MODE to select the AM tuning interval.

9 kHz area: Asia and Europe

10 kHz area: the U.S.A., Canada and South America

4 Press ENTER/DISPLAY. "bUSy" appears for about 4

seconds, and the tuning interval is changed.

Notes

After changing the tuning interval, you need to preset

radio stations again.

Precautions

On safety

· Should any solid objects or liquid fall into the CD

player, unplug it and have it checked by qualified

personnel before operating it any further.

· Do not put any foreign objects in the DC IN 4.5 V

(external power input) jack.

On power sources

· When you are not using the CD player for a long time,

disconnect all power sources from the CD player.

On AC power adaptor

· Use the commercially-available AC power adaptor

whose rated output is 4.5 V DC, 500 mA.

Do not use any other AC power adaptor. It may cause a

malfunction.

Polarity of the plug

· Do not touch the AC power adaptor with wet hands.

· Connect the AC power adaptor to an easily accessible

AC outlet. Should you notice an abnormality in the AC

power adaptor, disconnect it from the AC outlet

immediately.

· Do not install the AC power adaptor in a confined

space, such as a bookcase or built-in cabinet.

· To prevent fire or shock hazard, do not place objects

filled with liquids, such as vases, on the AC power

adaptor.

On rechargeable batteries and dry

batteries

· Do not charge the dry batteries.

· Do not throw the batteries into fire.

· Do not carry the batteries with coins or other metallic

objects. It can generate heat if the positive and negative

terminals of the battery are accidentally contacted by a

metallic object.

· Do not mix rechargeable batteries with dry batteries.

· Do not mix new batteries with old ones.

· Do not use different types of batteries together.

· When the batteries are not to be used for a long time,

remove them.

· If battery leakage occurs, wipe off any deposit in the

battery compartment, and install new batteries. In case

the deposit adheres to you, wash it off thoroughly.

On the CD player

· Keep the lens on the CD player clean and do not touch

it. If you do so, the lens may be damaged and the CD

player will not operate properly.

· Do not put any heavy object on top of the CD player.

The CD player and the CD may be damaged.

· Do not leave the CD player in a location near heat

sources, or in a place subject to direct sunlight,

excessive dust or sand, moisture, rain, mechanical

shock, unleveled surface, or in a car with its windows

closed.

· If the CD player causes interference to the radio or

television reception, turn off the CD player or move it

away from the radio or television.

· Discs with non-standard shapes (e.g., heart, square, star)

cannot be played on this CD player. Attempting to do so

may damage the CD player. Do not use such discs.

Note on moisture condensation

If the CD player is suddenly moved from a cold place to a

warm place, it may result in moisture condensation on the

pickup lens and malfunction or playback difficulties.

Should this occur, leave the CD player for a few hours,

then try playback again.

On headphones/earphones

Road safety

Do not use headphones/earphones while driving, cycling,

or operating any motorized vehicle. It may create a traffic

hazard and is illegal in some areas. It can also be

potentially dangerous to play your headsets at high

volume while walking, especially at pedestrian crossings.

You should exercise extreme caution or discontinue use in

potentially hazardous situations.

This warranty is valid only in the United States.

Preventing hearing damage

Avoid using headphones/earphones at high volume.

Hearing experts advise against continuous, loud and

extended play. If you experience a ringing in your ears,

reduce volume or discontinue use.

Consideration for others

Keep the volume at a moderate level. This will allow you

to hear outside sounds and to be considerate to the people

around you.

Maintenance

To clean the casing

Use a soft cloth slightly moistened in water or a mild

detergent solution. Do not use alcohol, benzine or thinner.

To clean the plugs

If the plugs become dirty, there is no audio or noise is

heard. Clean them with a dry soft cloth periodically.

Troubleshooting

Should any problem persist after you have made these

checks, consult your nearest Aiwa dealer.

"Hold" appears in the display when you

press a button, and the CD does not

play.

The buttons are locked. Slide HOLD back.

The battery compartment lid is de-

tached by an accidental drop, excessive

force, etc.

Attach it as illustrated below.

Specifications

System

Compact disc digital audio system

Laser diode properties

Material: GaAlAs

Wavelength:

= 780 nm

Emission duration: Continuous

Laser output: Less than 44.6 µW (This output is the value

measured at a distance of 200 mm from the objective lens

surface on the optical pick-up block with 7 mm aperture.)

Frequency range

10 kHz step:

TV: 2 - 13 ch

WB (weather band): 1 - 7 ch

FM: 87.5 - 108.0 MHz

AM: 530 - 1 710 kHz

9 kHz step:

TV: 2 - 13 ch

WB (weather band): 1 - 7 ch

FM: 87.5 - 108.0 MHz

AM: 531 - 1 602 kHz

Power requirements

· Two LR6 (size AA) batteries (not supplied): 3 V DC

· AC power adaptor (DC IN 4.5 V jack): 120 V, 60 Hz

· Two Ni-MH rechargeable batteries (size AA, 700

mAh): 2.4 V DC

Dimensions (w/h/d) (without projecting

parts and controls)

Approx. 136.0

× 20.4 × 139.0 mm (5 3/

8 ×

13/

16 × 5

2 in.)

Mass (excluding accessories)

Approx. 200 g (7 oz)

Operating temperature

5°C 35°C (41°F 95°F)

Design and specifications are subject to change without

notice.

Supplied Accessories

Headphones (1)