AIWA MMVX200 - Owner's Manual Immediate Download

OPERATING INSTRUCTIONS

INSTRUCCIONES DE MANEJO

MODE D'EMPLOI

OWNER'S RECORD

For your convenience, record the

model number (you will find it on

the rear of your set) and the serial

number (you will find it in the

cassette holder of your set) in the

space provided below.

Please refer them when you contact

your Aiwa dealer in case of difficulty.

Model No.

Serial No.

MM-VX200

MP3 PLAYER

REPRODUCTOR MP3

8A-HZ1-911-01

000721AYO-O-K

Printed in Korea

ENGLISH

ESPAÑOL

FRANÇAIS

For assistance and information,

call toll free 1-800-BUY-AIWA.

(United States and Puerto Rico)

2 ENGLISH

WARNING

TO REDUCE THE RISK OF FIRE OR

ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR

MOISTURE.

Under the copyright laws, neither the

documentation nor the software for this

product may be copied, photocopied,

reproduced, translated, or reduced to any

electronic medium or machine-readable

form, in whole or in part, without the prior

written consent of AIWA Co., Ltd.

rights reserved.

Microsoft and Windows are registered

trademarks of Microsoft Corporation.

Pentium and MMX are registered

trademarks of Intel Corporation.

SmartMedia is a registered trademark of

TOSHIBA Corporation.

Portions of this product are protected

under copyright law and provided by

Airs/Solana/4C.

RealPlayer and RealJukebox are

trademarks of RealNetworks Inc.

Warning

You must be aware that distributing copies

of MP3 files without permission is against

the copyright laws. You must use the MP3

encoding software included on the

supplied installation CD only for personal

use.

MM-VX200 player is designed to be ready

for the SDMI (Secure Digital Music

Initiative).

TABLE OF CONTENTS

Chapter 1

PREPARATION BEFORE USE

1 SYSTEM REQUIREMENTS . . . . . 3

2 CONTENTS . . . . . . . . . . . . . . . . . 3

3 PRECAUTIONS . . . . . . . . . . . . . . 4

4 INSERTING A BATTERY . . . . . . . 5

5 CONNECTING THE PLAYER TO

YOUR PC . . . . . . . . . . . . . . . . . . . 6

6 SmartMedia-ID INSTALLATION . . . . 6

Chapter 2

SOFTWARE INSTALLATION

1 INSTALLING THE VX200

MANAGER SOFTWARE . . . . . . . . 8

2 INSTALLING THE USB

DRIVER . . . . . . . . . . . . . . . . . . . . 10

3 INSTALLING THE WAVE DRIVER

(ADPCM Driver) . . . . . . . . . . . . . 10

4 UNINSTALLING THE VX200

MANAGER SOFTWARE . . . . . . . 11

5 UNINSTALLING THE WAVE

DRIVER (ADPCM Driver) . . . . . . 11

Chapter 3

SOFTWARE OPERATION

1 OPENING VX200 MANAGER . . . 12

2 PREPARING MP3 FILES . . . . . . 12

3 OPERATING VX200 MANAGER . . 14

Chapter 4

PLAYER OPERATION

1 PLAYER OVERVIEW . . . . . . . . . 18

2 DISPLAY OVERVIEW . . . . . . . . . 20

3 PLAYER OPERATION . . . . . . . . 21

Chapter 5

APPENDIX

1 SPECIFICATIONS . . . . . . . . . . . 24

2 FAQ AND TROUBLESHOOTING

GUIDE . . . . . . . . . . . . . . . . . . . . . 24

ENGLISH

Chapter 1

PREPARATION BEFORE USE

1 SYSTEM REQUIREMENTS . . . . . 3

2 CONTENTS . . . . . . . . . . . . . . . . . 3

3 PRECAUTIONS . . . . . . . . . . . . . . 4

4 INSERTING A BATTERY . . . . . . . 5

5 CONNECTING THE PLAYER TO

YOUR PC . . . . . . . . . . . . . . . . . . . 6

6 SmartMedia-ID INSTALLATION . . . . 6

1 SYSTEM REQUIREMENTS

The VX200 manager software requires

the following system:

· Windows 98, Windows 98 second

edition*

· Pentium 200 MHz MMX or faster

· 1 available USB Port

· CD-ROM drive supporting digital audio

extraction

· 15MB free hard-disk space (may vary

depending on the size of the MP3 files

you wish to use)

· 32MB RAM

· Full duplex Sound card and speakers

· 16-bit color video card

* For use only PC systems in which

Microsoft Windows 98 or Windows 98

Second Edition has been preinstalled by

the manufacturer.

2 CONTENTS

The following are supplied with this player.

Check to be sure all the items are in the

package.

· Player

· USB cable

· Remote control

· Stereo headphones

· Installation CD-ROM

· 32 MB SmartMedia-ID

· Carrying case

· Operating instructions, etc.

4 ENGLISH

3 PRECAUTIONS

The following are precautions that you

should always keep in mind. Any violation

of one or more of the following precautions

may cause damage and will void the

warranty.

To maintain good performance

· Avoid exposure to heat, moisture and

static electricity.

· Do not use the player in places that are

extremely hot, cold, dusty, or humid.

· In particular, do not keep the player in a

high humidity area such as a bathroom,

near a heater or in an area exposed to

direct sunlight (e.g., inside a parked car).

Be careful because it may become

extremely hot.

· When you carry the battery in your

pocket, do not have other metal objects

such as coins or keys in the same pocket.

· Friction caused from the metal and the

battery rubbing together may cause a

fire.

Caution of impact

Do not drop the player or allow any sharp

impact. This may cause serious damage

to the player.

Note on listening with the headphones

· Listen at a moderate volume to avoid

your hearing damage.

· Do not wear the headphones while

driving or cycling. It may create a traffic

hazard.

· You should use extreme caution or

temporarily discontinue use in potentially

hazardous situations, such as walking,

jogging, etc.

· Wear them properly; L is left and R is

right.

· The in-ear type headphones should be

worn with the longer cord behind your

neck.

CAUTION

Listening to the headphone stereo at full

power for extended periods of time can

result in hearing damage.

Chemicals

Do not use chemicals to clean the cabinet.

This may change the color of the player or

damage the surface. Use a soft towel to

clean the surface of the player.

ENGLISH

4 INSERTING A BATTERY

An alkaline battery is recommended for

use with this player.

1 Open the cover of the battery

compartment.

2 Insert a size AA (LR6) alkaline

battery with the

0 and 9 marks

correctly aligned, then close the

cover.

Battery indicator

The battery indicator on the display

changes depending on the remaining

power of the battery.

Full

Empty

Battery replacement

Replace the battery when

of the

battery indicator lights.

Note on dry cell battery

· Make sure that

0 and 9 marks are

correctly aligned.

· To prevent the risk of electrolyte leakage

or explosions, never recharge the battery,

apply heat to it, or take it apart.

· When not using the battery, remove it to

prevent needless battery wear.

· If the liquid leaks out from the battery,

wipe thoroughly to remove.