E (Español)
COMPACT DISC STEREO SYSTEM
SISTEMA ESTEREO CON REPRODUCTOR DE DISCOS COMPACTOS
CHAINE STEREO AVEC LECTEUR DE DISQUES COMPACTS
U
En (English)
8A-MTM-903-11
000223BKY-Y-M
F (Français)
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MODE D'EMPLOI
XH-A1000
For assistance and information
call toll free 1-800-BUY-AIWA
(United States and Puerto Rico)
CORRECTION
Please read the incorrect description in the
Operating Instructions as follows.
Page 21
AI EDIT RECORDING
WRONG
6 Press q REC/REC MUTE to start
recording.
RIGHT
6 Press qREC/REC MUTE and then press
c /d within 2 seconds to start
recording.
Page 22
PROGRAMMED EDIT
RECORDING
WRONG
8 Press q REC/REC MUTE to start
recording.
RIGHT
8 Press qREC/REC MUTE and then press
c /d within 2 seconds to start
recording.
XH-A1000
CORRECTION
Prière d'apporter les corrections suivantes au
mode d'emploi.
Page 21
ENREGISTREMENT PAR
MONTAGE INTELLIGENT
MAUVAIS
6 Appuyez sur qREC/REC MUTE pour
lancer l'enregistrement.
BON
6 Appuyez sur qREC/REC MUTE puis
appuyer sur
c/d dans les 2 secondes
qui suivent pour lancer l'enregistrement.
Page 22
ENREGISTREMENT PAR
MONTAGE PROGRAMME
MAUVAIS
8 Appuyez sur qREC/REC MUTE pour
lancer l'enregistrement.
BON
8 Appuyez sur qREC/REC MUTE puis
appuyer sur
c/d dans les 2 secondes
qui suivent pour lancer l'enregistrement.
8A-MTM-919-01
0001A-Y
Printed in Japan
CORRECCION
Interprete,
porfavor,
las
descripciones
incorrectas del manual de la forma sigulente.
Página 21
GRABACIÓN DE EDICIÓN AI
ERRONEO
6 Presione qREC/REC MUTE para iniciar
la grabación.
ORRECTO
6 Presione q REC/REC MUTE y luego
pulse
c /d antes de que pasen 2
segundos para iniciar la grabación.
Página 22
GRABACIÓN DE EDICIÓN
PROGRAMADA
ERRONEO
8 Presione qREC/REC MUTE para iniciar
la grabación.
ORRECTO
8 Presione q REC/REC MUTE y luego
pulse
c /d antes de que pasen 2
segundos para iniciar la grabación.
2 ENGLISH
ENGLISH
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
Owner's record
For your convenience, record the model number and serial
number (you will find them on the rear of your unit) in the space
provided below. Please refer to them when you contact your Aiwa
dealer in case of difficulty.
Model No.
Serial No. (Lot No.)
CX-A1000
SX-WA1000
SX-C1800
SX-R1800
3 Mounting surface -- Place the unit on a flat, even surface.
4 Ventilation -- The unit should be situated with adequate
space around it so that proper heat ventilation is assured.
Allow 10 cm (4 in.) clearance from the rear and the top of the
unit, and 5 cm (2 in.) from each side.
- Do not place the unit on a bed, rug, or similar surface that
may block the ventilation openings.
- Do not install the unit in a bookcase, cabinet, or airtight rack
where ventilation may be impeded.
5 Objects and liquid entry -- Take care that objects or liquid
do not get inside the unit through the ventilation openings.
6 Car ts and stands -- When placed or
mounted on a stand or cart, the unit should
be moved with care.
Quick stops, excessive force, and uneven
surfaces may cause the unit or cart to overturn
or fall.
7 Condensation -- Moisture may form on the CD pickup lens
when:
- The unit is moved from a cold spot to a warm spot
- The heating system has just been turned on
- The unit is used in a very humid room
- The unit is cooled by an air conditioner
When this unit has condensation inside, it may not function
normally. Should this occur, leave the unit for a few hours,
then try to operate again.
8 Wall or ceiling mounting -- The unit should not be mounted
on a wall or ceiling, unless specified in the Operating
Instructions.
Electric Power
1 Power sources -- Connect this unit only to power sources
specified in the Operating Instructions, and as marked on the
unit.
2 Polarization -- As a safety feature, some units are equipped
with polarized AC power plugs which can only be inserted
one way into a power outlet. If it is difficult or impossible to
insert the AC power plug into an outlet, turn the plug over and
try again. If it is not still inserted easily into the outlet, please
call a qualified service technician to service or replace the
outlet. To avoid defeating the safety feature of the polarized
plug, do not force it into a power outlet.
3 AC power cord
- When disconnecting the AC power cord, pull it out by the
AC power plug. Do not pull the cord itself.
- Never handle the AC power plug with wet hands, as this
could result in fire or shock.
- Power cords should be firmly secured to avoid being severely
bent, pinched, or walked upon. Pay particular attention to
the cord from the unit to the power socket.
- Avoid overloading AC outlets and extension cords beyond
their capacity, as this could result in fire or shock.
4 Extension cord -- To help prevent electric shock, do not use
a polarized AC power plug with an extension cord, receptacle,
or other outlet unless the polarized plug can be completely
inserted to prevent exposure of the blades of the plug.
5 When not in use -- Unplug the AC power cord from the power
outlet if the unit will not be used for several months or more.
When the cord is plugged in, a small amount of current
continues to flow to the unit, even when the power is turned
off.
"CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence
of
impor tant
operating
and
maintenance (servicing) instructions in the
literature accompanying the appliance.
PRECAUTIONS
Read the Operating Instructions carefully and completely before
operating the unit. Be sure to keep the Operating Instructions
for future reference. All warnings and cautions in the Operating
Instructions and on the unit should be strictly followed, as well
as the safety suggestions below.
Installation
1 Water and moisture -- Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool, or the like.
2 Heat -- Do not use this unit near sources of heat, including
heating vents, stoves, or other appliances that generate heat.
It also should not be placed in temperatures less than 5°C
(41°F) or greater than 35°C (95°F).
ENGLISH
3
En
SOUND
TABLE OF CONTENTS
PREPARATIONS
CHECK YOUR SYSTEM AND ACCESSORIES ................. 4
BASIC CONNECTIONS ...................................................... 4
CONNECTING OTHER EQUIPMENTS .............................. 6
CONNECTING A DVD PLAYER ......................................... 8
REMOTE CONTROL ........................................................... 9
BEFORE OPERATION ........................................................ 9
SOUND
AUDIO ADJUSTMENTS .................................................. 11
GRAPHIC EQUALIZER .................................................... 12
DSP SURROUND ............................................................. 13
RADIO RECEPTION
MANUAL TUNING ............................................................ 14
PRESETTING STATIONS ................................................ 15
TAPE PLAYBACK
BASIC OPERATIONS ...................................................... 16
CD PLAYING
BASIC OPERATIONS ...................................................... 17
PROGRAMMED PLAY ..................................................... 19
RECORDING
BASIC RECORDING ........................................................ 20
AI EDIT RECORDING ...................................................... 21
PROGRAMMED EDIT RECORDING ............................... 22
DOLBY SURROUND
ADJUSTING SPEAKER LEVEL ...................................... 23
PLAY WITH DOLBY PRO LOGIC .................................... 24
LISTENING TO DOLBY DIGITAL SURROUND SOUND ...... 25
KARAOKE
MICROPHONE MIXING ................................................... 26
CD KARAOKE PROGRAM .............................................. 28
CLOCK AND TIMER
SETTING THE CLOCK ..................................................... 29
SETTING THE SLEEP TIMER ......................................... 29
SETTING THE TIMER ...................................................... 30
GENERAL
CARE AND MAINTENANCE ........................................... 31
SPECIFICATIONS ............................................................ 32
TROUBLESHOOTING GUIDE ......................................... 33
PARTS INDEX ...................................................
Back cover
Outdoor Antenna
1 Power lines -- When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding -- Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE
UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
NEC-NATIONAL ELECTRICAL CODE
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMP
Antenna Grounding According to the National Electrical Code
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have got inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
4 ENGLISH
PREPARATIONS
CHECK YOUR SYSTEM AND
ACCESSORIES
CX-A1000 Compact disc stereo cassette receiver
SX-WA1000 Front speakers
SX-C1800 Center speaker
SX-R1800 Surround speakers
Remote control
AM antenna
FM antenna
Operating Instructions, etc.
BASIC CONNECTIONS
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with multichannel sound in your
home. Enjoy the enriched home theater system by connecting
the TV set or video equipments with this unit.
Complete setting and connection of the main unit, supplied
speakers, your TV and video equipments according to the
following procedure.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
There are no difference between the front speakers as well as
the surround speakers. Both speakers of its kind can be
connected as L (left) or R (right).
1 Connect the right speaker to the main unit.
1 Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R
0 terminal and the black cord
to the
9 terminal.
Wind the tip of the cord around the terminal. Then tighten
the terminal. Check that the cord is connected securely.
SPEAKER
IMP :
6
XH-A1000