COMPACT DISC STEREO SYSTEM
SISTEMA ESTEREO CON REPRODUCTOR DE DISCOS COMPACTOS
CHAINE STEREO AVEC LECTEUR DE DISQUES COMPACTS
NSX-AJ80
OPERATING INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MODE D'EMPLOI
U
En (English)
E (Español)
8A-NF6-903-01
000115AYI-U-9
F (Français)
Owner's record
For your convenience, record the model number and serial number (you will find them on the
rear of your set) in the space provided below. Please refer to them when you contact your
Aiwa dealer in case of difficulty.
Serial No.
For assistance and information
(United States and Puerto Rico)
Model No.
2 ENGLISH
ENGLISH
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
"CAUTION:TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL."
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of impor tant operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
PRECAUTIONS
Read the Operating Instructions carefully and completely before
operating the unit. Be sure to keep the Operating Instructions
for future reference. All warnings and cautions in the Operating
Instructions and on the unit should be strictly followed, as well
as the safety suggestions below.
Installation
1 Water and moisture -- Do not use this unit near water, such
as near a bathtub, washbowl, swimming pool, or the like.
2 Heat -- Do not use this unit near sources of heat, including
heating vents, stoves, or other appliances that generate heat.
It also should not be placed in temperatures less than 5°C
(41°F) or greater than 35°C (95°F).
3 Mounting surface -- Place the unit on a flat, even surface.
4 Ventilation -- The unit should be situated with adequate
space around it so that proper heat ventilation is assured.
Allow 10 cm (4 in.) clearance from the rear and the top of the
unit, and 5 cm (2 in.) from each side.
- Do not place the unit on a bed, rug, or similar surface that
may block the ventilation openings.
- Do not install the unit in a bookcase, cabinet, or airtight rack
where ventilation may be impeded.
5 Objects and liquid entry -- Take care that objects or liquids
do not get inside the unit through the ventilation openings.
6 Carts and stands -- When placed
or mounted on a stand or cart, the
unit should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the
unit or cart to overturn or fall.
7 Condensation -- Moisture may form on the CD pickup lens
when:
- The unit is moved from a cold spot to a warm spot
- The heating system has just been turned on
- The unit is used in a very humid room
- The unit is cooled by an air conditioner
When this unit has condensation inside, it may not function
normally. Should this occur, leave the unit for a few hours,
then try to operate again.
8 Wall or ceiling mounting -- The unit should not be mounted
on a wall or ceiling, unless specified in the Operating
Instructions.
Electric Power
1 Power sources -- Connect this unit only to power sources
specified in the Operating Instructions, and as marked on the
unit.
2 Polarization -- As a safety feature, some units are equipped
with polarized AC power plugs which can only be inserted
one way into a power outlet. If it is difficult or impossible to
insert the AC power plug into an outlet, turn the plug over and
try again. If it still does not easily insert into the outlet, please
call a qualified service technician to service or replace the
outlet. To avoid defeating the safety feature of the polarized
plug, do not force it into a power outlet.
3 AC power cord
- When disconnecting the AC power cord, pull it out by the
AC power plug. Do not pull the cord itself.
- Never handle the AC power plug with wet hands, as this
could result in fire or shock.
- Power cords should be firmly secured to avoid being severely
bent, pinched, or walked upon. Pay particular attention to
the cord from the unit to the power outlet.
- Avoid overloading AC outlets and extension cords beyond
their capacity, as this could result in fire or shock.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instr uctions, may cause har mful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
En
ENGLISH
3
FM antenna
AM antenna
Remote control
Check your system and accessories
NSX-AJ80
CX-NAJ80 Compact disc stereo cassette receiver
SX-WNAJ85 Main speakers
SX-S80 Satellite speakers
TABLE OF CONTENTS
PRECAUTIONS ................................................................... 2
PREPARATIONS
CONNECTIONS ................................................................. 4
REMOTE CONTROL ........................................................... 6
BEFORE OPERATION ........................................................ 6
SETTING THE CLOCK ........................................................ 7
SOUND
AUDIO ADJUSTMENTS .................................................... 8
GRAPHIC EQUALIZER ....................................................... 8
DSP SURROUND ............................................................. 10
3-AMP PANORAMA SOUND SYSTEM ........................... 10
RADIO RECEPTION
MANUAL TUNING ............................................................ 12
PRESETTING STATIONS ................................................ 12
TAPE PLAYBACK
BASIC OPERATIONS ...................................................... 13
CONTINUOUS PLAY ....................................................... 14
CD PLAYING
BASIC OPERATIONS ...................................................... 15
PROGRAMMED PLAY ..................................................... 16
RECORDING
BASIC RECORDING ........................................................ 17
DUBBING A TAPE MANUALLY ....................................... 18
DUBBING THE WHOLE TAPE ......................................... 18
AI EDIT RECORDING ...................................................... 19
PROGRAMMED EDIT RECORDING ............................... 20
KARAOKE
MICROPHONE MIXING ................................................... 21
KARAOKE PROGRAM .................................................... 22
TIMER
SETTING THE SLEEP TIMER ......................................... 23
SETTING THE TIMER ...................................................... 23
OTHER FEATURES
DEMO (Demonstration) .................................................. 25
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT ....................... 26
LISTENING TO EXTERNAL SOURCES ......................... 26
GENERAL
CARE AND MAINTENANCE ........................................... 27
TROUBLESHOOTING GUIDE ......................................... 27
SPECIFICATIONS ............................................................ 28
PARTS INDEX ...................................................
Back cover
4 Extension cord -- To help prevent electric shock, do not use
a polarized AC power plug with an extension cord, receptacle,
or other outlet unless the polarized plug can be completely
inserted to prevent exposure of the blades of the plug.
5 When not in use -- Unplug the AC power cord from the power
outlet if the unit will not be used for several months or more.
When the cord is plugged in, a small amount of current
continues to flow to the unit, even when the power is turned
off.
Outdoor Antenna
1 Power lines -- When connecting an outdoor antenna, make
sure it is located away from power lines.
2 Outdoor antenna grounding -- Be sure the antenna system
is properly grounded to provide protection against unexpected
voltage surges or static electricity build-up. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
on proper grounding of the mast, supporting structure, and
the lead-in wire to the antenna discharge unit, as well as the
size of the grounding unit, connection to grounding terminals,
and requirements for grounding terminals themselves.
Maintenance
Clean the unit only as recommended in the Operating
Instructions.
Damage Requiring Service
Have the units serviced by a qualified service technician if:
- The AC power cord or plug has been damaged
- Foreign objects or liquid have gotten inside the unit
- The unit has been exposed to rain or water
- The unit does not seem to operate normally
- The unit exhibits a marked change in performance
- The unit has been dropped, or the cabinet has been damaged
DO NOT ATTEMPT TO SERVICE THE UNIT YOURSELF.
4 ENGLISH
PREPARATIONS
CONNECTIONS
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord.
1
1
1
1
1 Connect the right speaker to the main unit.
1 Connect the speaker cord with the plug to the SPEAKERS
HIGH FREQ R terminal.
2 Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R
0 terminal and the black cord
to the
9 terminal.
Positioning the Speakers
In addition to the left and right main speakers, this unit comes
with two Satellite Speakers for Aiwa's unique 3-AMP PANORAMA
SOUND SYSTEM (page 10).
To achieve the optimum effect obtainable with the 3-Amp
Panorama Sound System, position the satellite speakers so that
they form an equilateral triangle with the listener, as seen in the
illustration below.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
En
ENGLISH
5
AM antenna
FM antenna
PREPARATIONS
· Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
2
2
2
2
2 Connect the left speaker to the main unit.
Connect the speaker cord with plug to the SPEAKERS HIGH
FREQ L terminal, and the other speaker cord to the
SPEAKERS LOW FREQ L terminals in the same manner
as step 1.
3
3
3
3
3 Connect the satellite speakers to the main unit.
Connect the satellite speaker placed to your right to the
SATELLITE SPEAKERS R terminal and the one to your
left to the SATELLITE SPEAKERS L terminal.
4
4
4
4
4 Connect the supplied antennas.
Connect the FM antenna to FM 75
terminals and the AM
antenna to AM LOOP terminals.
5
5
5
5
5 Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an
AC outlet for the first time. To deactivate the DEMO, set the
clock.
· Do not leave objects generating magnetism, such as credit
cards, near the speakers, as these objects may be damaged.
· Do not bring the FM antenna near metal objects or curtain rails.
· Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise will be picked up.
· Do not unwind the AM antenna wire.
To position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall.
AM antenna:
Position and rotate this annenna to find the best possible
reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
To attach the satellite speaker to the pedestal
Fit the protuberance of the pedestal to the slot.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75
terminals.
To connect other optional equipment
© page 26.